MedaCure PAB100-C User manual

1
ITEM # PAB100-C
PIVOT ASSIST BAR
USER MANUAL

2
1. Pivot Assist Bar Installation
Insert the Pivot Assist Bar mounting base onto the bed frame rectangular tube. Adjust
the position as desired and tighten the screw as per Figure # 1.
Figure#1
2．Repeat the above installation in Step 1 to install the Pivot Assist Bar on the other side of
the bed.
3．The Pivot Assist Bar is an assist device to aid the patient when transferring in and out of
bed.
To raise the Assist Bar: Pull up the Assist Bar until it clicks in place as per “Assist Bar raising
status” in Figure # 2.
To lower the Assist Bar: Pull out the locking knob (to unlock the Assist Bar) and pull down
the Assist Bar towards the head or foot section as per “Assist Bar lowering status” in Figure
# 2.

3
Figure # 2
Assist Bar in the raised position
Assist Bar in the lowered position
Pull out the lock
button to lower the
Pivot Assist Bar