Meteor CONDUIT MOUNT User manual

INSTALLATION GUIDE
meteor-lighting.com
CONDUIT MOUNT
Page 1
• Before wiring to power supply and during servicing or relamping, turn off
power at fuse or circuit breaker.
• All servicing or relamping must be performed by qualified service personnel.
• Product must be grounded to avoid potential electric shock or other potential
hazard.
• Product must be installed at locations and heights, in a manner consistent
with its intended use, and in compliance with Electrical Code and local codes.
SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE
IMPORTANT SAFETY INFORMATION
READ AND FOLLOW ALL SAFETY INSTRUCTIONS

Page 2
INSTALLATION GUIDE
CONDUIT MOUNT
Meteor Lighting reserves the right to make changes to this product for design and development improvements at any time without prior notice, and such modification
shall be effective immediately. ©Meteor Illumination Technologies, Inc.
meteor-lighting.com 1300 John Reed Court, Unit B, City of Industry, California 91745 E: [e-mail] T: 213-255-2060
1
Attach the conduit mount junction box to the desired ceiling
position by using mounting hardware. Ensure that the
conduit openings are oriented in the desired direction.
Remove the screws from the bottom of the junction box to
release the conduit end caps.
2
Attach the conduit to the junction box. If the conduit has
threads, screw it in firmly. If the conduit is threadless, reattach
the screw from below to firmly secure the conduit in place.
Thread the wires through the conduits.
For stem mount applications, please refer to the Stem Mount
installation guide.
4
3
5
For adjustable cable applications, please refer to the
Adjustable Cable installation guide.
6