Meteor DEXT MINI Series User manual

INSTALLATION GUIDE
meteor-lighting.com
Page 1
• Before wiring to power supply and during servicing or relamping, turn off
power at fuse or circuit breaker.
• All servicing or relamping must be performed by qualified service personnel.
• Product must be grounded to avoid potential electric shock or other potential
hazard.
• Product must be installed at locations and heights, in a manner consistent
with its intended use, and in compliance with Electrical Code and local codes.
SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE
IMPORTANT SAFETY INFORMATION
READ AND FOLLOW ALL SAFETY INSTRUCTIONS

Page 2
INSTALLATION GUIDE
ALUMINUM SHROUD PC SHROUD
DEXT MINI SERIES ACCESSORY
Meteor Lighting reserves the right to make changes to this product for design and development improvements at any time without prior notice, and such modification
shall be effective immediately. ©Meteor Illumination Technologies, Inc.
meteor-lighting.com 1300 John Reed Court, Unit B, City of Industry, California 91745 E: [e-mail] T: 213-255-2060
Install the Aluminum Shroud to the fixture with 3 supplied
screws.
1
Install the PC shroud to the fixture with 3 supplied screws.
1
CONICAL LENS
Push the cover in a clockwise direction to make the clips
locked tight, and fasten the PC shroud and conical lens with
the supplied screw.
2
Locate the clips and threaded hole to matching positions.
1
Threaded hole
Clips
Clips
Clips
A