Meteor VELA 6 User manual

INSTALLATION GUIDE
SHROUDS & DIFFUSERS
meteor-lighting.com
• Before wiring to power supply and during servicing or relamping, turn off
power at fuse or circuit breaker.
• All servicing or relamping must be performed by qualified service personnel.
• Product must be grounded to avoid potential electric shock or other potential
hazard.
• Product must be installed at locations and heights, in a manner consistent
with its intended use, and in compliance with Electrical Code and local codes.
SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE
IMPORTANT SAFETY INFORMATION
READ AND FOLLOW ALL SAFETY INSTRUCTIONS

Bring up the aluminum shroud to the fixture and align it to
the indicated openings and fasten in place with 4 thumb
screws.
*Clean gloves must be worn to avoid dirt and fingerprints
when installing the shroud and diffuser.
Clean the interior and exterior surface using a soft rag with
water.
Page 2
INSTALLATION GUIDE
VELA 6
Meteor Lighting reserves the right to make changes to this product for design and development improvements at any time without prior notice, and such modification
shall be effective immediately. ©Meteor Illumination Technologies, Inc.
meteor-lighting.com 1300 John Reed Court, Unit B, City of Industry, California 91745 E: [e-mail] T: 213-255-2060
1 2
ALUMINUM SHROUD
16", 19", 22"

Fasten the PC shroud to the fixture by fastening 3 screws from
inside the shroud.
*Clean gloves must be worn to avoid dirt and fingerprints
when installing the shroud and diffuser.
1
Page 3
INSTALLATION GUIDE
VELA 6
Meteor Lighting reserves the right to make changes to this product for design and development improvements at any time without prior notice, and such modification
shall be effective immediately. ©Meteor Illumination Technologies, Inc.
meteor-lighting.com 1300 John Reed Court, Unit B, City of Industry, California 91745 E: [e-mail] T: 213-255-2060
Clean the interior and exterior surface using a soft rag with
water.
2
POLYCARBONATE SHROUD
16", 19", 22"

Fasten the PC shroud to the fixture by fastening 3 screws from
inside the shroud.
*Clean gloves must be worn to avoid dirt and fingerprints
when installing the shroud and diffuser.
1
Page 4
INSTALLATION GUIDE
VELA 6
Meteor Lighting reserves the right to make changes to this product for design and development improvements at any time without prior notice, and such modification
shall be effective immediately. ©Meteor Illumination Technologies, Inc.
meteor-lighting.com 1300 John Reed Court, Unit B, City of Industry, California 91745 E: [e-mail] T: 213-255-2060
Cover the shroud with the conical lens plate and fasten it
in place.
3
Clean the interior and exterior surface using a soft rag with
water.
2
OUTDOOR POLYCARBONATE SHROUD
16", 19", 22"

Bring up the diffuser to the fixture and align it to the indicated
openings and fasten in place with 4 thumb screws.
*Clean gloves must be worn to avoid dirt and fingerprints
when installing the shroud and diffuser.
1
Clean the surface using a soft rag with water.
Page 5
INSTALLATION GUIDE
VELA 6
Meteor Lighting reserves the right to make changes to this product for design and development improvements at any time without prior notice, and such modification
shall be effective immediately. ©Meteor Illumination Technologies, Inc.
meteor-lighting.com 1300 John Reed Court, Unit B, City of Industry, California 91745 E: [e-mail] T: 213-255-2060
2
POLYCARBONATE DIFFUSER
TRANSLUCENT, CLEAR