Metra Electronics 95-8903B User manual

INSTALLATION INSTRUCTIONS FOR PART 95-8903B
APPLICATIONS
SUBARU
LEGACY & OUTBACK
2010
(NON-NAVIGATION RADIOS ONLY)
KIT FEATURES
•DDIN radio provision
•Stacked ISO radio provision
•Painted scratch resistant matte black
A) DDIN Trim plate B) DDIN Brackets
KIT COMPONENTS
A
TOOLS REQUIRED:
•Small Flat Blade Screwdriver • Phillips Screwdriver
•Panel Removal Tool • Socket Wrench
1-800-221-0932
©COPYRIGHT 2007-2009 METRA ELECTRONICS CORPORATION
www.metraonline.com
95-8903B
B
METRA. THE WORLD’S BEST KITS.™
WIRING AND ANTENNA CONNECTIONS (Sold Separately)
Wiring Harness:
•70-8901 Subaru Harness 1990-Up
•70-7552 Nissan Harness 2007-Up
Antenna Adapter:
•40-SB10 Subaru Antenna Adapter 2005-Up

Dash Disassembly
-2010 Subaru Legacy . . . . . . . . . . . .......................... 1
-2010 Subaru Outback . . . . . . . . . . .......................... 1
Kit Assembly
-Double DIN / Stacked ISO DIN Head Unit Provision. . . . . . . . . . . . . . . . 2
TABLE OF CONTENTS
95-8903B
*Note:
Refer also to the instructions included with the aftermarket radio.
Metra recommends MECP certified
technicians.

95-8903B DASH DISASSEMBLY
2010 SUBARU LEGACY / OUTBACK
A
1
Disconnect the negative battery ter-
minal to prevent an accidental short
circuit.
1
Unclip and remove the radio trim
panel including the a/c vents.
( Figure A)
2
Remove (4) Phillips screws securing
the factory radio.
3

95-8903B KIT ASSEMBLY
A
B
2
Locate the factory wiring harness in
the dash. Metra recommends using
the proper mating adapter from Metra
or AXXESS. Re-connect the negative
battery terminal and test the unit for
proper operation.
1
Attach the Double DIN brackets to the
Double DIN trim plate.(FigureA)
2
Slide the Double DIN head unit or
stacked ISO head units into the
bracket/radio housing assembly and
securethe Double DIN head unit or
stacked ISO head units to the assem-
bly using the screws supplied with
the radio. (Figure B)
3
Reassemble dash in reverse order of
disassembly.
4
2010 SUBARU LEGACY / OUTBACK
DOUBLE DIN / STACKED ISO DIN HEAD UNIT
PROVISIONS

NOTES
95-8903B

NOTES
95-8903B

NOTES
95-8903B

306
INSTRUCTIONS
1-800-221-0932
REV. 12/18/09 © COPYRIGHT 2003-2009 METRA ELECTRONICS CORPORATION INST95-8903B
www.metraonline.com
95-8903B INSTRUCTIONS
METRA. THE WORLD’S BEST KITS.™