Middle Atlantic Products C5 SERIES CREDENZA RACK User manual

C5 SERIES
CREDENZA RACK
assembly instructions
THANK YOU
Thank you for purchasing the C5 Credenza Rack. Please read all instructions thoroughly before
assembling this product.
WARNING: Instructions for C5 Series accessories MUST be read thoroughly prior to following these
instructions. Please see the accessory-specific instructions for details on proper assembly.
PRODUCT FEATURES
- Built-in thermostatically controlled cooling
- Welded rack frame ships separate to allow for equipment integration before finished surfaces are
attached
- 14 rackspaces per bay
- Factory installed casters
I-00439 Rev G
- Weight rating of 800 pounds, including finishing kit*, with maximum 350 pounds located on
top surface (*Middle Atlantic Products supplied finishing kit is 200 pounds complete)

Page 2
KICKPLATE INSTALLATION
1) Install the Kickplate by aligning screws into place using keyholes on credenza frame.
FRONT VIEW
REAR VIEW
Kickplate secures into place
when shifted in direction of arrow

Page 3
SIDE PANEL INSTALLATION
NOTE: For accessories related to the Side Panels, please read those instructions thoroughly before
continuing with the installation below
2) Install Side Panels by placing the four pre-installed hooks into the four slots on the frame. (FIGURE A)
(FIGURE A)
NOTE: When installing side panels, ensure door hinge plates are located at the front of the frame.
Door Hinge Plate

Page 4
TOP SURFACE INSTALLATION
3) Attach Top Surface to the frame using provided screws. Extra screws provided. (FIGURE B)
NOTE: Flat edge of Top Surface is designated as the rear.
(FIGURE B)
(Side Panel removed for clarity)
Number of #10 x 5/8” Screws Used Per Credenza Configuration
3-Bay 12
2-Bay 8
1-Bay 4
Conguration Screws
NOTE: If using the C5MM1 Series Universal Monitor Mounts, please read those instructions
thoroughly before continuing with the installation below.

Page 5
DOOR INSTALLATION ONTO SIDE PANEL
4) Install doors using provided screws (two places per door) as shown. Extra screws provided.
(FIGURE C)
NOTE: All Doors may be installed to swing open from either left or right.
(FIGURE C)
Factory Installed Bumpers
(NOTE: (6) Six replacement bumpers supplied)

Page 6
DOOR INSTALLATION ONTO MULLION
5) Door to be installed onto credenza frame using provided screws (two places per door) as shown.
(FIGURE D)
(FIGURE D)
(Additional Sides and Doors removed for clarity)

Page 7
HINGE ADJUSTMENTS
Side Adjustment: Adjusts horizontal placement of door. Adjusts door-to-door gap
- Rotate screw clockwise or counterclockwise (+/-0.06 in) [+/-1.5 mm]
1
Height Adjustment: Adjusts vertical height of door
- Loosen to align door, then tighten (+/-0.08 in) [+/-2 mm]
2
Depth Adjustment: Adjusts the space between the door and the face of the frame of credenza
- Achievable through cam adjustment (+0.1/-0.02 in) [+2.5/-0.5 mm]
3
3
2
1
NOTE:
Directional adjustments apply to the door in the closed position. Hinge adjustment is done with door in
open position. Refer to (FIGURE E) for appropriate adjustments
Door in open position
2
1
3
(FIGURE E)
1

Page 8
HANDLE/KNOB INSTALLATION
Depending on credenza style (traditional or contemporary), handles and knobs are installed into
pre-drilled holes shown in the figures provided. (FIGURE F)
(FIGURE G)
LACER BAR RELOCATION
Pre-installed Lacer Bars can be relocated on frame by removing screws as shown. (FIGURE G)
(Contemporary Handle - 2 screws) (Traditional Knob - 1 screw)
(FIGURE F)

Page 9
DIMENSIONS
65 3/16”
[1655 mm]
29 1/2”
[749 mm]
20 29/32” [531 mm]
43”
[1092 mm]
68 15/16”
[1751 mm] 46 3/4”
[1187 mm]
24 5/8” [625 mm]
24 5/8”
[625 mm]
3-Bay 2-Bay
1-Bay Door
1-Bay
Top Surface
2-Bay
Top Surface
3-Bay
Top Surface
21 7/8”
[555 mm]
29 1/2”
[749 mm]
29 1/2”
[749 mm]
24 7/8”
[631 mm]
1 1/8”
[28 mm]
27 1/4”
[692 mm]
25 3/8”
[644 mm]
29 1/2”
[749 mm]
Side Panel
3/4”
[19 mm]
1” [25 mm]
24 7/8”
[631 mm]
24 7/8”
[631 mm]
1 1/8”
[28 mm]
27 1/4”
[692 mm]
1 1/8”
[28 mm]
27 1/4”
[692 mm]

Page 10 30% Recycled Paper
WARRANTY
Middle Atlantic Products, Inc. (the "Company") warrants the C5 Credenza Frame to be free from defects in material or workmanship under normal use and conditions for the lifetime
of the product, the Cladding for (7) seven years, and the Fans for (3) three years from the date of shipment by the Company.
The Company's entire liability to the purchaser, and the purchaser's (or any other party's) sole and exclusive remedy, under this warranty shall be limited, at the Company's option, to
either (a) return of and refund of the price paid for, or (b) repair or replacement at the Company's factory of the products purchased, or any part or parts thereof, which the Company
has determined to be defective after inspection thereof at the Company's factory. This warranty does not cover damage due to acts of God,accident, misuse, abuse or negligence by
parties other than the Company, or any modification or alteration of the products. In addition, this warranty does not cover damage due to improper handling, assembly, installation or
maintenance.
THIS WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, IMPLIED WARRANTIES
OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, IN NO EVENT SHALL THE COMPANY BE LIABLE FOR ANY SPECIAL, INCIDENTAL, INDIRECT, OR
CONSEQUENTIAL DAMAGES WHATSOEVER (INCLUDING, WITHOUT LIMITATION, DAMAGES FOR LOSS OF BUSINESS PROFITS, BUSINESS INTERRUPTION OR ANY
OTHER PECUNIARY LOSS) ARISING OUT OF THE USE OF THE PRODUCTS PURCHASED, EVEN IF THE COMPANY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH
DAMAGES. THE COMPANY'S LIABILITY TO THE PURCHASER (OR ANY OTHER PARTY) HEREUNDER, IF ANY, SHALL IN NO EVENT EXCEED THE PURCHASE PRICE OF
THE PRODUCTS PAID TO THE COMPANY.
Corporate Headquarters
Corporate Voice 973-839-1011 - Fax [phone] / International Voice [phone] - Fax [phone]
middleatlantic.com - [email protected]
Middle Atlantic Canada
Voice 613-836-2501 - Fax [phone] / middleatlantic.ca - [email protected]
Factory Distribution
USA: NJ - CA - IL Canada: ON - BC
At Middle Atlantic Products we are always listening. Your comments are welcome.
Middle Atlantic Products is an ISO 9001 and ISO 14001 Registered Company.
FAN NOTES
WARNING: TOP RACK SPACE HAS ONLY 10 5/8 INCH [269 mm] USEABLE DEPTH BEFORE
INTERFERENCE WITH FANS OCCURS.
- Thermostatically Controlled fans turn on when inside Credenza temperature reaches 87oF/30.5oC,
and turn off at 85oF/29.4o C.
- Cool air is pulled from under the front doors, and exits through the front vent.
- When integrating frame, each bay must have at least a 1 space vent panel or opening for
proper air management.
- Power Supply for Fans:
Nominal Output Voltage: 7.5 VDC
Max Current: 800 mA
Input Voltage: 100-240 VAC, 60 Hz, 200 mA
Plug Type: 4.75 x 1.7 x 9.5mm Locate plug for Power Supply
from underneath frame