Middle Atlantic Products MDV-CNR1 User manual

I-02351 Rev I
MDV SERIES
MDV-CNR1
Corner Desk With Overbridge
Instruction Sheet
THANK YOU
Thank you for purchasing the MDV-CNR1 Corner Desk with Overbridge. Please read these
instructions thoroughly before assembling this product.
PRODUCT FEATURES
- Attractive corner desk features a durable graphite top.
- Designed for installations in conjunction with the MultiDesk Video™
side bay rack.
- Configurable overbridge provides up to 4 rackspace
mounting locations.

Page 2
RACKRAIL
RACK
RAIL
RACK
RAIL
"B"
(ONE RACKBAY
IN CENTER)
TOOLS REQUIRED
#2 Phillips Head Driver
ASSEMBLY
1) Attach the brackets to the desk as shown
using the large screws (7 screws per leg).
(FIGURE A)
2) Insert the legs into the brackets, aligning the set the
screw opening in the leg with the opening in the
bracket. (FIGURE A)
3) Tighten all brackets using the enclosed hex key
by turning the set screw 3/4 turn clockwise.
NOTE:Do not overtighten.
4) Select the overbridge configuration that best suits
your application.
FIGURE A
ADJUST LEVELING
FEET AS NEEDED
SETSCREW
OPENING
LEG
BRACKET
OPENING IN
BRACKET
SETSCREW
(4 PLACES)
OVERBRIDGE
"C"
(TWO RACKBAYS,
ONE LEFT, ONE RIGHT)
“A”
(NO RACKBAY)
NOTE: Rackrail is a user installed option
on "B" and "C" configurations.
5) If rackbay(s) are needed, attach
the rackrail to the risers as shown using
flat head screws. (FIGURE B)
6) Install the 1/2 turn fasteners into the riser
(4) fasteners per riser. (FIGURE B)
FIGURE B
RISER
1/2 TURN FASTENERS
SLOPED EDGE
RACKRAIL

Page 3
7) Install the studs into the desktop
holes for the overbridge configuration
desired. (FIGURE C)
NOTE: The arrow points toward the stud.
(Indicates unlocked position)
NOTE: The black plastic hole plugs are
provided to fill the open holes.
8) Install the studs in the overbridge
bottom for the desired overbridge
configuration. (FIGURE D)
FIGURE C
FIGURE D
FIGURE E
FIGURE F
9) Install the four risers to the desktop
studs with the sloped edge of the
risers facing toward the back of the
desktop, then install the overbridge bottom
studs to the risers. (FIGURE E)
10) Tighten all 1/2 turn fasteners to the
lock position. (FIGURE F)
NOTE: The arrow points to the
lock position.
STUD
DESKTOP
BACK
OVERBRIDGE
BOTTOM
STUD
OVERBRIDGE
RISER
BACK
DESKTOP STUDS
DESKTOP
1/2 TURN FASTENER
(4 PER RISER)
RISER
ASSEMBLY (Continued)

Page 4
WARRANTY
Middle Atlantic Products (the "Company") warrants the MDV-CNR1 to be free from defects in material
or workmanship under normal use and conditions for a period of (7) years from the date of shipment
by the Company.
The Company's entire liability to the purchaser, and the purchaser's (or any other party's) sole and
exclusive remedy, under this warranty shall be limited, at the Company's option, to either (a) return of
and refund of the price paid for, or (b) repair or replacement at the Company's factory of the products
purchased, or any part or parts thereof, which the Company has determined to be defective after
inspection thereof at the Company's factory.
This warranty does not cover damage due to acts of God, accident, misuse, abuse or negligence by
parties other than the Company, or any modification or alteration of the products. In addition, this
warranty does not cover damage due to improper handling, assembly, installation or maintenance.
THIS WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES OF ANY KIND, EITHER EXPRESSED OR
IMPLIED, INCLUDING, BUT NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND
FITNESS FOR A PARTICULAR PURPOSE.
TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, IN NO EVENT SHALL THE COMPANY
BE LIABLE FOR ANY SPECIAL, INCIDENTAL, INDIRECT, OR CONSEQUENTIAL DAMAGES
WHATSOEVER (INCLUDING, WITHOUT LIMITATION, DAMAGES FOR LOSS OF BUSINESS PROFITS,
BUSINESS INTERRUPTION OR ANY OTHER PECUNIARY LOSS) ARISING OUT OF THE USE OF THE
PRODUCTS PURCHASED, EVEN IF THE COMPANY HAS BEEN ADVISED OF THE POSSIBILITY OF
SUCH DAMAGES. THE COMPANY'S LIABILITY TO THE PURCHASER (OR ANY OTHER PARTY)
HEREUNDER, IF ANY, SHALL IN NO EVENT EXCEED THE PURCHASE PRICE OF THE PRODUCTS
PAID TO THE COMPANY.
Corporate Headquarters
Corporate Voice 973-839-1011 - Fax [phone]
International Voice [phone] - Fax [phone]
middleatlantic.com - [email protected]
Middle Atlantic Canada
Voice 613-836-2501 - Fax [phone]
middleatlantic.ca - [email protected]
Factory Distribution
USA: NJ - CA - IL Canada: ON - BC
At Middle Atlantic Products we are always listening. Your comments are welcome.
Middle Atlantic Products is an ISO 9001 and ISO 14001 Registered Company.