Midea FP-74SBC015LMTM-B1 User manual

BLENDER
Please read this User’s Manual carefully for proper use of Midea Blender.
FP-74SBC015LMTL-B1 / FP-74SBC015LMTM-B1

1
When using electrical appliances, basic safety precautions should
always be followed including the following:
There is a potential injury from misuse. Please handle it with care.
Always disconnect the appliance from the supply if it is left unattended
and before assembling, disassembling or cleaning.
This appliance shall not be used by children. Keep the appliance and its
cord out of children reach.
Appliances can be used by persons with reduced physical, sensory or
mental capabilities or lack of experience and knowledge if they have
been given supervision or instruction concerning use of the appliance in a
safe way and if they understand the hazards involved.
Children shall not play with the appliance.
Be careful when handing the sharp cutting blades, emptying the bowl and
during cleaning.
Be careful if hot liquid is poured into blender as it can be ejected out of the
appliance due to a sudden steaming.
Switch off the appliance and disconnect from supply before changing
accessories or approaching parts that move in use.
This appliance is intended to be used in household and similar
applications such as:
– Staff kitchen areas in shops, offices and other working environments;
– Farm houses;
– By clients in hotels, motels and other residential type environments;
– Bed and breakfast type environments.
This appliance conforms to EC Regulation 1935/2004 on materials and
articles intended to come into contact with food.
Do not exceed the maximum indication on the blender jar, the mill(specific
types only)beaker and the chopper bowl (specific types only).
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
If food sticks to the wall of the blender jar, switch off the appliance and
unplug it. them use a spatula to remove the food from the wall.
Never fill the blender jar with ingredients hotter than 80°C.
The appliance can only be switched on if the blender jar or the beaker is
assembled on the motor unit correctly.
Do not let the appliance run for more than 2 minutes (Mill:30 seconds) at
a time. let the appliance cool down to room temperature before you
continue processing.
If the supply cord is damaged, it must be replaced by the manufacturer,
its service agent or similarly qualified persons in order to avoid a hazard.
IMPORTANT SAFETY INSTRUCTIONS

2
The failure to follow any of the important safeguards and the important
instructions for safe use is a misuse of your table blender that can void
your warranty and create the risk of serious injury.
This blender is fitted with a safety feature which safeguards against
excessive loads. In case of overloading. the blender automatically activates
the protection and operation will stop. if this occurs, set the rotary knob to
OFF, unplug the appliance and allow it to cool down for 15 minutes. remove
the ingredients and clear up the blender jar before starting operation.
Caution:
Ensure that the blender is switched off before removing
Caution:
Safety feature
There is a potential injury from misuse. Please handle it with care.
Always disconnect the appliance from the supply if it is left unattended
and before assembling, disassembling or cleaning.
This appliance shall not be used by children. Keep the appliance and its
cord out of children reach.
Appliances can be used by persons with reduced physical, sensory or
mental capabilities or lack of experience and knowledge if they have
been given supervision or instruction concerning use of the appliance in a
safe way and if they understand the hazards involved.
Children shall not play with the appliance.
Be careful when handing the sharp cutting blades, emptying the bowl and
during cleaning.
Be careful if hot liquid is poured into blender as it can be ejected out of the
appliance due to a sudden steaming.
Switch off the appliance and disconnect from supply before changing
accessories or approaching parts that move in use.
This appliance is intended to be used in household and similar
applications such as:
– Staff kitchen areas in shops, offices and other working environments;
– Farm houses;
– By clients in hotels, motels and other residential type environments;
– Bed and breakfast type environments.
This appliance conforms to EC Regulation 1935/2004 on materials and
articles intended to come into contact with food.
Do not exceed the maximum indication on the blender jar, the mill(specific
types only)beaker and the chopper bowl (specific types only).
12.
13.
14.
15.
16.
If food sticks to the wall of the blender jar, switch off the appliance and
unplug it. them use a spatula to remove the food from the wall.
Never fill the blender jar with ingredients hotter than 80°C.
The appliance can only be switched on if the blender jar or the beaker is
assembled on the motor unit correctly.
Do not let the appliance run for more than 2 minutes (Mill:30 seconds) at
a time. let the appliance cool down to room temperature before you
continue processing.
If the supply cord is damaged, it must be replaced by the manufacturer,
its service agent or similarly qualified persons in order to avoid a hazard.
SAVE THESE INSTRUCTION.
THIS UNIT IS INTENDED FOR HOUSEHOLD USE ONLY.
IMPORTANT SAFETY INSTRUCTIONS

3
PART NAME
No. Description
1
2
3
4
5
Measuring cup
Blender jar cover
Blender jar (1.25L/1.5L)
Blender jar seal
Blade system
6 Speed control dial
7
8
200ml jar
Jar seal
9Grinder blade system
10 Chopper blade system
11 Spatula
1
2
3
4
5
6
TECHNICAL DATA OF THE PRODUCT
Product Name Model No. Rated Voltage Rated Frequency Rated Power Capacity
Table Blender FP-SBC015LMTL-B1 220-240V~ 50-60Hz 350W 1.25L
ACCESSORIES (Optional)
11
7
8
9 10
Optional

4
TECHNICAL DATA OF THE PRODUCT
Product Name Model No. Rated Voltage Rated Frequency Rated Power Capacity
Table Blender FP-SBC015LMTM-B1 220-240V~ 50-60Hz 450W 1.5L
PART NAME
ACCESSORIES (optional)
1
2
3
4
5
6
Glass Grinder Jar
Grinder blade system
Grinder
1.5 litre plastic jug
No. Description
1
2
3
4
5
Measuring cup
jar cover
1.5 litre glass jug
Jar seal
Blade collar assembly
6 Switch knob

5
Before using your blender for the first time,
remove any packaging material and promotional
labels.
Be careful when handling the blades as they are
extremely sharp.
Wash the jug, lids, blade assembly and attach-
ments in warm soapy water with a soft cloth.
Rinse and dry thoroughly. All parts (except motor
base) may be washed in the dishwasher, on the
top shelf.
Many recipes process best with a combination of
speeds with occassional use of pulse.
Momentary burst of high power.
Low speed to combine more delicate foods with
a folding motion, and is good for combining wet
and dry ingredients.
INSTRUCTIONS FOR USE
1
2
3
4
Table blender
Before First Use
Functions (Speed)
MOTOR BASE SPEED CONTROL
PULSE
CHOP (speed 1)

6
INSTRUCTIONS FOR USE
Run the blender only for the appropriate amount of
ime required.
Do not over blend ingredients.
Use the PULSE setting when food is too thick or
coarse to circulate within the blender jug.
Do not exceed the maximum mark.
If any moisture or liquid appears on top of the motor
base during blending, turn the blender off and unplug
at the wall. Remove the blender jug, and wipe motor
base immediately with a dry cloth or paper towel.
The maximum amount of ice cubes that the blender
can process is 8 cubes from a standard ice tray.
Use the PULSE function for foods that only require
short bursts of power, such as chopping nuts and
crushing ice.
When blending drinks with ice cubes or frozen fruit,
use PULSE in short bursts.
Thicker mixtures puree more efficiently if the jug is
too full.
Do not use metal utensils, as they may damage the
blades or blender jug.
Do not blend a heavy mixture for more than 10
seconds. For normal blending tasks, do not blend
longer than 1 minutes at a time. If you need to blend
longer, turn off the blender and stir ingredients before
LIQUIFY (speed 2)
Tip:
starting again.
This rest will help protect the motor from wear and
tear.
The blender will not knead dough, or mash potatoes.
When blending warm ingredients, do not put more
than 2 blending bottles at a time in.
Do not blend hot or boiling ingredients. Allow food to
cool down to a warm state before placing in the
blender. This is to safeguard against sudden bursts
of steam that could cause the lid to dislodge.
If blending warm ingredients, place a tea towel over
the lid and hold downfirmly.
5
6
7
8
9
Hot liquids can erupt during blending.
Do not blend hot liquids.
Caution:
High speed is ideal for breaking down
ingredients to make ice based drinks and
other finely blended mixtures.

7
INSTRUCTIONS FOR USE
Run the blender only for the appropriate amount of
ime required.
Do not over blend ingredients.
Use the PULSE setting when food is too thick or
coarse to circulate within the blender jug.
Do not exceed the maximum mark.
If any moisture or liquid appears on top of the motor
base during blending, turn the blender off and unplug
at the wall. Remove the blender jug, and wipe motor
base immediately with a dry cloth or paper towel.
The maximum amount of ice cubes that the blender
can process is 8 cubes from a standard ice tray.
Use the PULSE function for foods that only require
short bursts of power, such as chopping nuts and
crushing ice.
When blending drinks with ice cubes or frozen fruit,
use PULSE in short bursts.
Thicker mixtures puree more efficiently if the jug is
too full.
Do not use metal utensils, as they may damage the
blades or blender jug.
Do not blend a heavy mixture for more than 10
seconds. For normal blending tasks, do not blend
longer than 1 minutes at a time. If you need to blend
longer, turn off the blender and stir ingredients before 1 2
Grinder
Portable handle design
Tip:
starting again.
This rest will help protect the motor from wear and
tear.
The blender will not knead dough, or mash potatoes.
When blending warm ingredients, do not put more
than 2 blending bottles at a time in.
Do not blend hot or boiling ingredients. Allow food to
cool down to a warm state before placing in the
blender. This is to safeguard against sudden bursts
of steam that could cause the lid to dislodge.
If blending warm ingredients, place a tea towel over
the lid and hold downfirmly.
Note:
Do not process hot foods or liquids in blender.
Do not store food or liquids in the blender jar.
Avoid bumping or dropping the blender.
10
11
12

8
INSTRUCTIONS FOR USE
3 4
3 4
5 6
Overload protection system
Tip:
Machine running time can not be more than 3 minutes. After the shutdown, it is
necessary to let it fully heat, cooling to room temperature.
The MAX line is usually a good indicator to prevent overly heavy loading, however some
especially dense combinations of ingredients may still strain the motor. If the motor
seems to be straining or running slowly, only operate for 10 seconds at a time, or reduce
the amount of ingredients used. Adding more liquid can also help to loosen dense
mixtures.

9
In case of abnormalities such as abnormal noises, smell, smoke, etc., you should
immediately cut off power and stop use.
If the product cannot work, please check if the power supply is connected, if the
switch is put to the ON position and if fittings are installed in place.
If the product still cannot work after checks mentioned above, please consult the
designated repair centre for maintenance.
ABNORMALITY ANALYSIS AND HANDING
Abnormality Handling
Fault Analysis and Elimination
Note:
This blending chart should be used as a guide only.
RECIPES
Food Preparation Quantity Functions
( )Speed Time
Smoothie
Blended
soups
Milk, fruit, yoghurt,
ice cream
Cool to room temp
Max 800ml
800ml
Chop (speed 1);
Liquify (speed 2)
Chop (speed 1)
Ice or frozen
fruit
Frozen no larger
than standard ice
tray Max 8 pieces Pulse;
Liquify (speed 2) 60 secs
60 secs
50-60 secs
Grinder
Carrots juicer Carrots, water
Coffee bean 50g
600g carrots
900g water
speed 2
speed 2
30 secs
120 secs
1.
2.
3.
Motor doesn’t start or
blade doesn’t rotate
Food is lumpy or
unevenly chopped
Food is chopped too
fine or is watery
Food sticks to
blade and jug
Blender stopped
suddenly while in use
• Check that the power plug is properly inserted into the power outlet.
• This can happen when too much food is being blended at one time.
Try a smaller amount, and work in batches if necessary.
• The ingredients may be too large. Try cutting into smaller pieces.
For best results, ingredients should be in pieces no larger than 2cm.
• Try blending for shorter period of time. Use PULSE for better control.
Food sticks
• The mixture may be too thick. Try adding more liquid, pulsing, and/or using
a slower speed for blending.
• We recommend blending in smaller batches, or cutting ingredients into
smaller batches.

The appliance must not be disposed of with regular household waste.
At the end of its service life, the appliance must be properly delivered
to a collection point for the recycling of electrical and electronic
equipment. By Collection By Collection and recycling of old appliances,
you are making an important contribution to the conservation of our
natural resources and provide for environmentally sound and healthy
disposal.
Environmental protection
10
Unplug the power cord from the power outlet after
use for safety reasons.
Jug, blades and lids
Avoid allowing food residue to dry on. Follow these
steps as soon as possible after use:
• Rinse most of the residue off the jug, blades and
lids.
• Hand wash in warm, soapy water using a mild
liquid detergent and non-abrasive sponge.
Motor base
To clean the motor base, wipe with a soft, damp
cloth then dry
thoroughly. Wipe any excess food particles from
the power cord.
Cleaning agents
Do not use abrasive scouring pads or cleaners on
either the motor base or any part of the blender, as
they may scratch the surface. Use only warm
soapy water with a soft cloth.
CLEANING AND MAINTENANCE
Cleaning
Cleaning appliance body、chopper lid、whisk body
1
2
3
Cat hazard: Blades in jar are very sharp.
Use caution when cleaning.
Caution:

A quality product of
Customer Care
(02) 863-55-22
Landline:
[phone]
Viber/SMS:
[email protected]om.ph
Email:
1-800-10-863-5522
Toll free:
Monday - Sunday / 8:00am - 8:00pm