Midea 350141 User manual

HIGH SPEED BLENDER
USER MANUAL
350141
CONTENT
IMPORTANT SAFETY INSTRUCTIONS.
PART NAME
TECHNICAL DATA OF THE PRODUCT
INSTRUCTIONS FOR USE
IMPORTANT NOTE: Please read the manual carefully before operating your
product. Retain it for future reference.
CLEANING AND MAINTENANCE
CIRCUIT PRINCIPLE DIAGRAM
ABNORMALITY ANALYSIS AND HANDING
1
3
3
4
6
7
8
9
RECIPES

To avoid the risk of serious injury when using your blender, basic
safety precautions should be followed, including the following.
READ ALL INSTRUCTIONS, SAFEGUARDS, AND WARNINGS
BEFORE OPERATING BLENDER
There is a potential injury from misuse. Please handle it with care.
Always disconnect the appliance from the supply if it is left unattended
and before assembling, disassembling or cleaning.
This appliance shall not be used by children. Keep the appliance and its
cord out of children reach.
Appliances can be used by persons with reduced physical, sensory or
mental capabilities or lack of experience and knowledge if they have
been given supervision or instruction concerning use of the appliance in
asafe way and if they understand the hazards involved.
Children shall not play with the appliance.
Be careful when handing the sharp cutting blades, emptying the bowl
and during cleaning.
Be careful if hot liquid is poured into blender as it can be ejected out of
the appliance due toasudden steaming.
Switch off the appliance and disconnect from supply before changing
accessories or approaching parts that move in use.
This appliance is intended to be used in household and similar
applications such as:
–Staff kitchen areas in shops, offices and other working environments;
–Farm houses;
–By clients in hotels, motels and other residential type environments;
–Bed and breakfast type environments .
If the supply cord is damaged, it must be replaced by the manufacturer,
1.
2.
3.
4.
5.
6.
7.
8.
9.
1
10.
IMPORTANT SAFETY INSTRUCTIONS
There is a potential injury from misuse. Please handle it with care.
Always disconnect the appliance from the supply if it is left unattended
and before assembling, disassembling or cleaning.
This appliance shall not be used by children. Keep the appliance and its
cord out of children reach.
Appliances can be used by persons with reduced physical, sensory or
mental capabilities or lack of experience and knowledge if they have
been given supervision or instruction concerning use of the appliance in
a safe way and if they understand the hazards involved.
Children shall not play with the appliance.
Be careful when handing the sharp cutting blades, emptying the bowl
and during cleaning.
Be careful if hot liquid is poured into blender as it can be ejected out of
the appliance due toasudden steaming.
Switch off the appliance and disconnect from supply before changing
accessories or approaching parts that move in use.
This appliance is intended to be used in household and similar
applications such as:
–Staff kitchen areas in shops, offices and other working environments;
–Farm houses;
–By clients in hotels, motels and other residential type environments;
–Bed and breakfast type environments .
If the supply cord is damaged, it must be replaced by the manufacturer,

its service agent or similarly qualified persons in order to avoid a hazard.
2
its service agent or similarly qualified persons in order to avoid a hazard.
The failure tofollow any of the important safeguards and the important
instructions for safe use is a misuse of your Table blender that can void
your warranty and create the risk of serious injury.
SAVE THESE INSTRUCTION.
THIS UNIT IS INTENDED FOR HOUSEHOLD USE ONLY.
Caution:
Ensure that the blender is switched off before removing
Caution:
IMPORTANT SAFETY INSTRUCTIONS
This appliance is equipped with motor themal protector. If the
appliance overheats, it switches off automatically. Unplug the
appliance and let it cool down until room temperature then put the
mains plug back into the power outlet and switch on the appliance
again. Please contact your dealer or an authorized service center if it
is activated too often.
Safety system

3
PART NAME
TECHNICAL DATA OF THE PRODUCT
Product name Model No. Rated voltage Rated frequency Rated power
HIGH SPEED BLENDER 350141 220-240V~ 50-60Hz 1200W
No. Description
1
2
3
4
5
6
Measuring cup
Jar cover
Seal
1.5 litre jar
Main body
Speed control dial
7Function buttons
1
2
3
4
5
6
7

4
Do not contact surface of the lower clutchto prevent burning when the mixer works.
Caution:
INSTRUCTIONS FOR USE
1
1
2
2
4 5 6
Tableblender
Before First Use
Be careful when handling the blades as they are extremely sharp.
Wash the jar, lids, blade assembly and attachments in warm soapy water with a soft
cloth. Rinse and dry thoroughly. All parts (except motor base) may be washed in the
dishwasher machine, on the top shelf.
7 8 9
3
10 11 12

INSTRUCTIONS FOR USE
5
Overload protection system
Speed control dial (OFF / ON/ MIN / MAX )
Help to protect motor
The blender will not knead dough, or mash potatoes.
Do not blend hot or boiling ingredients. Allow food cool down to a warm state
before placing in the blender. This is to safeguard against sudden bursts of steam
that could cause the lid to dislodge.
The blender is equipped with an internal non-self resetting overload protector to
protect the motor from damage under heavy loads or continuous, the motor may
stop. If the blender suddenly stops during use, this protector may have tripped.
Unplug the power supply and remove the jar and leave it to cool for at least 30
minutes.
Tripping the protector indicates that the blender is being loaded too heavily, or
with excessive continuous use. Reduce the amount of ingredients used or allow
more time in between blending to prevent it from happening again, which will help
preserve the life of the motor.
The MAX line is usually a good indicator to prevent overl loading, Please do not
blend the recipe exceeded the max line.
The speed control dial can turn on or off the Unit,adjust the setting from Min.to max
speed;
Min. speed:
Low speed to combine more delicate foods with a folding motion, and is good for
combining wet and dry ingredients.
Middle speed:
(Middle setting is between Max .and Min setting):Medium speed and more control for
creating batters or coarser textures.
Max. speed setting:
High speed is ideal for breaking down ingredients to make cocktails and other finely
blnded mixtures.
Pulse:
Momentary burst of highest power.
Smoothie:
Optimises the blender's capabilities to create great smoothies and drinks.
Ice Crush:
crush the ice function.

6
Blending programs
The blending times in the chart below are not approximate and should be adjusted to
suit your own tastes, different food quantities and food manufacturer’s instructions.
Note: If you want to prepare a larger quantity, let the appliance cool down to room
temperature before you process the next batch of ingredients.
RECIPES
Button Duration
Speed (operation
cycle) Action Use
Control knob max. 3
minutes
set speed (within
MIN - MAX range)
set desired speed
blending raw
or cooked food
SMOOTHIE
button
max. 2
minutes
soft start for 15s
followed with
acceleration to
reach max speed
press once to
start, press again
to stop
preparing
smoothies,
shakes
ICE CRUSH
button 40-46
seconds 0.15s blade rotation
followed with 0.9s
resting time
press once to
start, press again
to stop
crushing ice
PULSE
button
max. 3
minutes
max speed
release to stop
blending at
max speed
600g carrots,
900g water, 2 min
Control knob max. 3
minutes
max speed carrots juice
Press the PULSE button at any time to bring the motor to max speed. If used for 3
minutes, the appliance will switch off automatically. Wait 3 minutes before using the
appliance again.
Press and release the PULSE button during the ICE CRUSH and SMOOTHIE
programs tostop the operation early. The appliance switches to standby mode and
indicators are flashing.
Pressing the ICE CRUSH and SMOOTHIE buttons will not affect control knob
operation. Press and release the PULSE button or turn the control knob toOFF
position tofinish the program during operation early.
Turning the control knob during ICE CRUSH and SMOOTHIE programs will modify
the motor unit speed, following the control knob setting. Then turn the control knob
to ON position tostop operation.
Turn the control knob toOFF position to stop any program during operation and
switch the appliance off.
Tip:
Hot liquids can erupt during blending. Do not blend hot liquids.
This product is not suitable for mixing dry food. Never run the appliance empty.
Caution:

In case of abnormalities such as abnormal noises, smell, smoke, etc., you should
immediately cut off power and stop use.
If the product cannot work, please check if the power supply is connected, if the
switch is put to the ON position and if fittings are installed in place.
If the product still cannot work after checks mentioned above, please consult the
designated repair centre for maintenance.
ABNORMALITY ANALYSIS AND HANDING
Abnormality Handling
Fault Analysis and Elimination
1.
2.
3.
The appliance is not
working
Appliance not plugged in
Wall outlet not energized
Appliance not switched on
Overheated appliance
Over current protection
activated
Too much food in the jar
Malfunctioning appliance
Insert the plug into the wall outlet
Check fuses and circuit breaker
Turn the control knob to the ON position to
place the appliance in standby mode.Indicator
Turn the control knob to the OFF position,
unplug the appliance from the wall outlet and
allow to cool down before using it again
Turn the control knob to the OFF position
to switch the appliance o , then to the ON
position to place the appliance in standby
mode. Resume blending operation
Turn the control knob to the OFF position,
remove some food, shake ingredients to
redistribute and restart blending operation
Turn the control knob to the OFF position,
unplug the appliance from the wall outlet and
check and repair
the appliance
The blades are
rotating very slowly
Too much food in the jar /
Motor is overloaded
Not enough liquid in the jar
/ Motor is overloaded
Turn the control knob to the OFF position,
remove some food, shake ingredients to
redistribute and restart blending operation
Turn the control knob to the OFF position,
add some liquid and restart blending operation
Food not fully
blended
Ingredients too large
Too much food in the jar
Turn the control knob to the OFF position,
remove ingredients and cut them into smaller
pieces
Turn the control knob to the OFF position,
remove some food, shake the jar to
redistribute the ingredients and then restart
blending operation
Water leakage Parts not tightly secured
Missing seal ring on the lid
Damaged seal ring on the
lid
Damaged seal ring on the
blade unit
Check and secure the parts carefully
Place the required seal
Replace with a proper new seal
Replace the blade unit
Problem Cause Solution
7

CLEANING AND MAINTENANCE
Dishwasher
Unplug the power cord from the power outlet after use for safety reasons.
8
Cat hazard: Blades in jar are very sharp. Use caution when cleaning.
Warning:
Jug, blades and lids
Motor base
Avoid allowing food residue to dry on. Follow these steps as soon as possible after
use:
sponge.
To clean the motor base, wipe with a soft, damp cloth then dry thoroughly. Wipe any
excess food particles from the power cord.
Cleaning agents
Do not use abrasive scouring pads or cleaners on either the motor base or any part
of the blender, as they may scratch the surface. Use only warm soapy water with a
soft cloth.
Pressurisation
The blending jar may be rinsed by adding cold water, attaching blades, and either
blending or shaking by hand for 10 seconds.
IMPORTANT: There is a risk ofpressurisation from hotwater.
jar, lids and blade assembly may be washed in the dishwasher machine on the top
shelf only.
Stubborn food stains and odours
Strong smelling foods such cumin and coriander, and some vegetables such as
carrots may leave an odour or stain.
1 2 3
Strong smelling foods such cumin and coriander, and some vegetables such as
carrots may leave an odour or stain.

To remove, pour warm soapy water and fill to the MAX mark. Set aside to soak for 5
minutes. Then wash with a mild detergent and warm water, rinse well and dry
thoroughly. Store blending bottle and jug with lids off.
CLEANING AND MAINTENANCE
9
Storage
To remove, pour warm soapy water and fill to the MAX mark. Set aside to soak for 5
minutes. Then wash with a mild detergent and warm water, rinse well and dry
thoroughly. Store blending bottle and jug with lids off.
Store your blender upright with the blender jar assembled on the motor base, or
beside it. Do not place anything on top. To allow air to circulate, keep the lid off.
The appliance must not be disposed of with regular household waste.
At the end of its service life, the appliance must be properly delivered
to a collection point for the recycling of electrical and electronic
equipment. By Collection By Collection and recycling of old appliances,
you are making an important contribution to the conservation of our
natural resources and provide for environmentally sound and healthy
disposal.
Environmental protection
CIRCUIT PRINCIPLE DIAGRAM
POWER PCBA
CONTROL
PCBA
PRESS
BUTTON
Inter lock
N
PE
ACL
M2 PE
PE
M1
CN211
CN103
CN104
CN205
CN102
ACN
L