Midea MJ-BL6008BW User manual

MJ-BL6008BW
USER MANUAL
BLENDER
Warning notices: Before using this product,please read this manual carefully and keep it for future reference.
The design and specifications are subject to change without prior notice for product improvement.
Consult with your dealer or manufacturer for details.
The diagram above is just for reference. Pleasetake the appearance of the actual product as the standard.

THANK YOU LETTER
Thank you for choosing Midea! Before using your new Midea product, please read
this manual thoroughly to ensure that you know how to operate the features and
functions that your new appliance offers in a safe way.
CONTENTS
01
0 1
0 6
0 7
1 0
1 1
1 2
1 3
0 5
0 2
1 4
THANK YOU LETTER
SAFETY INSTRUCTIONS
SPECIFICATIONS
PRODUCT OVERVIEW
OPERATION INSTRUCTIONS
CLEANING AND MAINTENANCE
TROUBLESHOOTING
TRADEMARKS, COPYRIGHTS AND LEGAL STATEMENT
DISPOSAL AND RECYCLING
DATA PROTECTION NOTICE

02
Danger
This symbol indicates that there are dangers to the life and health of
persons due to extremely flammable gas.
Warning of electrical voltage
This symbol indicates that there is a danger to life and health of
persons due to voltage.
Warning
The signal word indicates a hazard with a medium level of risk which, if
not avoided, may result in death or serious injury.
Caution
The signal word indicates a hazard with a low degree of risk which, if
not avoided, may result in minor or moderate injury.
Attention
The signal word indicates important information (e.g. damage to
property), but not danger.
Observe instructions
This symbol indicates that a service technician should only operate and
maintain this appliance in accordance with the operating instructions.
The following safety guidelines are intended to prevent unforeseen risks or damage from
unsafe or incorrect operation of the appliance. Please check the packaging and appliance
on arrival to make sure everything is intact to ensure safe operation. If you find any
damage, please contact the retailer or dealer. Please note modifications or alterations to
the appliance are not allowed for your safety concern. Unintended use may cause
hazards and loss of warranty claims.
Read these operating instructions carefully and attentively before using/commissioning the
unit and keep them intheimmediate vicinity of theinstallation site or unit for later use!
Intended Use
Explanation of Symbols
SAFETY INSTRUCTIONS

03
IMPORTANT SAFETY INSTRUCTIONS
To avoid the risk of serious injury when using your
blender, basic safety precautions should be followed,
including the following.
READ ALL INSTRUCTIONS, SAFEGUARDS, AND
WARNINGS BEFORE OPERATING BLENDER
• There is a potential injury from misuse. Please handle it
with care.
• Always disconnect the appliance from the supply if it is
left unattended and before assembling, disassembling or
cleaning.
• This appliance shall not be used by children. Keep the
appliance and its cord out of children reach.
• Appliances can be used by persons with reduced
physical, sensory or mental capabilities or lack of
experience and knowledge if they have been given
supervision or instruction concerning use of the
appliance in a safe way and if they understand the
hazards involved.
• Children shall not play with the appliance.
• Be careful when handing the sharp cutting blades,
emptying the bowl and during cleaning.
• Be careful if hot liquid is poured into blender as it can be
ejected out of the appliance due to a sudden steaming.
• Switch off the appliance and disconnect from supply
before changing accessories or approaching parts that
move in use.
• This appliance is intended to be used in household and
similar applications such as:
– Staff kitchen areas in shops, offices and other working
environments;
– Farm houses;
– By clients in hotels, motels and other residential type
environments;

04
– Bed and breakfast type environments.
– This appliance conforms to EC Regulation 1935/2004
on materials and articles intended to come into
contact with food.
• If the supply cord is damaged, it must be replaced by
the manufacturer, its service agent or similarly qualified
persons in order to avoid a hazard.
Ensure that the blender is switched off before
removing
The failure to follow any of the important safeguards
and the important instructions for safe use is a misuse
of your blender that can void your warranty and
create the risk of serious injury.
SAVE THESE INSTRUCTION.
THIS UNIT IS INTENDED FOR HOUSEHOLD USE ONLY.
CAUTION
This appliance is equipped with motor themal
protector. If the appliance overheats, it switches off
automatically. Unplug the appliance and let it cool
down until room temperature then put the mains plug
back into the power outlet and switch on the
appliance again. Please contact your dealer or an
authorized service center if it is activated too often.
SAFETY SYSTEM

05
SPECIFICATION
Model MJ-BL6008BW
Rated voltage 220-240V~
Rated frequency 50-60Hz
Rated power 600W
Circuit Principle Diagram
Key switch
The micro switch
mottor
Diode IN5408
220-240V~/600W
L
PLUG N
220-240V~
50-60Hz
M
0
1
2
P
IN

PRODUCT OVERVIEW
Parts Name
Accessories
06
3
2
1
4
No.
1
2
3
4
5
Description
Glass jar (1L)
Blade system
Gear switch
Plastic grinder cup
6Grinder blade system
7Spatula
Jar lid
7
Grinder Spatula
5
6
（Optional）

Table Blender
OPERATION INSTRUCTIONS
Functions (Speed)
MOTOR BASE SPEED CONTROL
07
0 1 2 P 9
9
1
10 0
1 2 3
4 5 6
7 8
012P
012P
012P
0 1 2 P
10
9
0 1 2 P

012P
012P
0 1 2 P0 1 2 P
08
Many recipes process best with a combination of speeds with occassional use of pulse.
PULSE Momentary burst of high power.
CHOP (speed 1) Low speed to combine more delicate foods with a folding
motion, and is good for combining wet and dry ingredients.
LIQUIFY (speed 2) High speed is ideal for breaking down ingredients to make ice
based drinks and other finely blended mixtures.
GRINDER (Optional)
1 2 3
4 5 6
9
7 8 9
012P

09
• When the blender is switched on, use the spatula to enhance the smoothness and
consistency of result.
• When the blender is switched off, use the spatula to remove the sticky ingredients on
the jar.
• Do not process hot foods or liquids in blender.
• Do not store food or liquids in the blender jar.
• Avoid bumping or dropping the blender.
Before using your blender for the first time, remove any packaging material and promo-
tional labels.
Be careful when handling the blades as they are extremely sharp.
Wash the jug, lids, blade assembly and attachments in warm soapy water with a soft
cloth. Rinse and dry thoroughly. All parts (except motor base) may be washed in the
dishwasher, on the top shelf.
Spatula
Before First Use
• The working time of the grinding cup should not be more than 60 seconds and the
max capacity shall not exceed 50g, the continuous working interval must be 5 minutes
and no more than 3 times, and the working time of the mixing cup should not exceed 3
minutes. After the shutdown, it is necessary to let it fully heat, cooling to room
temperature.
• The MAX line is usually a good indicator to prevent overly heavy loading, however
some especially dense combinations of ingredients may still strain the motor. If the
motor seems to be straining or running slowly, only operate for 10 seconds at a time,
or reduce the amount of ingredients used. Adding more liquid can also help to loosen
dense mixtures.
Overload Protection System
1 2 3
NOTE

10
• Hot liquids can erupt during blending. Do not blend hot liquids.
• This product is not suitable for mixing dry food. Never run the appliance empty.
CAUTION
• In the process of operation, press the “0” key to complete the program in advance
• Press the “0” key to stop any program and shut down the device during operation
Tip
Blending programs
The blending times in the chart below are not approximate and should be adjusted to
suit your own tastes, different food quantities and food manufacturer’s instructions.
RECIPES
Food Preparation Quantity
Carrots juicer
TimeFunctions (speed)
Ice or frozen Frozen no larger than
standard ice trayfruit
Smoothie
Blended soups
Carrots,water
Milk,fruit,yoghurt,
ice cream
Cool to room temp
60 secs
60secs
Dry pepper 50g(max)
800mL
Max 8pieces
Max 800mL
Pepper 50g(max)
Coffee bean 50g(max)
50g(max)
50g(max)
Soybean
Peanut
Dry pepper
Pepper
Speed 2
Speed 2
Speed 2
Speed 2
Speed 2
Speed 2
Chop(speed 1)
Pulse;
Liquify(speed 2)
Chop(speed 1):
Liquify(speed 2)
Coffee bean
Dry soybean
Peanut 60secs
60secs
60secs
60secs
60secs
60secs
60secs
400g carrots,
600g water

11
CLEANING AND MAINTENANCE
Cleaning
Maintaining
Unplug the power cord from the power outlet after use for safety reasons.
Jug, blades and lids
Avoid allowing food residue to dry on. Follow these steps as soon as possible after use:
Store your blender upright with the blender jug assembled on the motor base, or beside
it. Do not place anything on top. To allow air to circulate, keep the lid off.
Motor base
To clean the motor base, wipe with a soft, damp cloth then dry thoroughly. Wipe any
excess food particles from the power cord.
Cleaning agents
Do not use abrasive scouring pads or cleaners on either the motor base or any part of
the blender, as they may scratch the surface. Use only warm soapy water with a soft
cloth.
Dishwasher
The jug, lids and blade assembly may be washed in the dishwasher on the top shelf only.
Stubborn food stains and odours
Strong smelling foods such cumin and coriander, and some vegetables such as carrots
may leave an odour or stain.
To remove, pour warm soapy water and fill to the MAX mark. Set aside to soak for 5
minutes. Then wash with a mild detergent and warm water, rinse well and dry
thoroughly. Store blending bottle and jug with lids off.
WARNING
• Rinse most of the residue off the jug, blades and lids.
• Hand wash in warm, soapy water using a mild liquid detergent and non-abrasive
sponge.
01
0 1 2 P

12
Problem Cause Solution
• Insert the plug into the
wall outlet
• Check fuses and circuit
breaker
• Press the “0” key,unplug
the appliance from the
wall outlet and allow to
cool down before using it
again
• Press the “0” key, to
switch the appliance off
Resume blending
operation
• Press the “0” key,remove
some food, shake
ingredients to redistribute
and restart blending
operation
• Press the “0” key,unplug
the appliance from the
wall outlet and contact
qualified personnel to
check and repair the
appliance
• Appliance not plugged in
• Wall outlet not energized
• Appliance not switched
on
• Overheated appliance
• Over current protection
activated
• Too much food in the jar
• Malfunctioning appliance
The appliance is
not working
Operation of your appliance can lead to errors and malfunctions. The following tables
contain possible causes and notes for resolving an error message or malfunction. It is
recommended to read the tables carefully below in order to save your time and money
that may cost for calling to the service center.
TROUBLESHOOTING
Abnormality Handling
Fault Analysis and Elimination
1. In case of abnormalities such as abnormal noises, smell, smoke, etc., you should
immediately cut off power and stop use.
2. If the product does not work, please check whether the power is on, whether the "1 or
2" key is pressed, and whether the accessories are installed in place.
3. If the product still cannot work after checks mentioned above, please consult the
designated repair centre for maintenance.

13
• Press the“0” key,remove
some food, shake
ingredients to redistribute
and restart blending
operation
• Press the “0” key,add
some liquid and restart
blending operation
• Too much food in the jar
/Motor is overloaded
• Not enough liquid in the
jar / Motor is overloaded
The blades are
rotating very
slowly
• Press the "0" key, remove
ingredients and cut them
into smaller pieces
• Press the "0" key,emove
some food, shake the jar
to redistribute the
ingredients and then
restart blending operation
• Ingredients too large
• Too much food in the jar
Food not fully
blended
• Check and secure the
parts carefully
• Place the required seal
• Replace with a proper new
seal
• Replace the blade unit
• Parts not tightly secured
• Missing seal ring on the
lid
• Damaged seal ring on
the lid
• Damaged seal ring on th
e blade unit
Water leakage

logo, word marks, trade name, trade dress and all versions there of are
trademarks, copyrights and other intellectual property rights, and all goodwill derived
valuable assets of Midea Group and/or its affiliates (“Midea”), to which Midea owns
from using any part of an Midea trademark. Use of Midea trademark for commercial
purposes without the prior written consent of Midea may constitute trademark
infringement or unfair competition in violation of relevant laws.
This manual is created by Midea and Midea reserves all copyrights thereof. No entity or
individual may use, duplicate, modify, distribute in whole or in part this manual, or
bundle or sell with other products without the prior written consent of Midea.
All the described functions and instructions were up to date at the time of printing this
manual. However, the actual product may vary due to improved functions and designs.
TRADEMARKS, COPYRIGHTS
AND LEGAL STATEMENT
14

DISPOSAL AND RECYCLING
Important instructions for environment
Compliance with the WEEE Directive and Disposing of the Waster Product:
This product complies with EU WEEE Directive (2012/19/EU). This product bears a
classification symbol for waster electrical and electronic equipment (WEEE).
This symbol indicates that this product shall not be disposed
with other household wastes at the end of its service life. Used
recycling of electrical electronic devices. To find these
collection systems please contact to your local authorities or
retailer where the product was purchased. Each household
performs important role in recovering and recycling of old
appliance. Appropriate disposal of used appliance helps
prevent potential negative consequences for the environment
and human health.
Compliance with RoHS Directive
The product you have purchased complies with EU RoHS Directive (2011/65/EU). It does
not contain harmful and prohibited materials specified in the Directive.
Package information
Packaging materials of the product are manufactured from
recyclable materials in accordance with our National Environ-
ment Regulations. Do not dispose of the packaging materials
together with the domestic or other wastes. Take them to the
packaging material collection points designated by the local
authorities.
device must be returned to official collection point for
15

DATA PROTECTION NOTICE
For the provision of the services agreed with the customer,
we agree to comply without restriction with all stipulations of applicable data protection
law, in line with agreed countries within which services to the customer will be delivered,
as well as, where applicable, the EU General Data Protection Regulation (GDPR).
Generally, our data processing is to fulfil our obligation under contract with you and for
product safety reasons, to safeguard your rights in connection with warranty and
product registration questions. In some cases, but only if appropriate data protection is
ensured, personal data might be transferred to recipients located outside of the
European Economic Area.
Further information are provided on request. You can contact our Data Protection
Officer via [email protected]. To exercise your rights such as right to object your
personal date being processed for direct marketing purposes, please contact us via
[email protected]. To find further information, please follow the QR Code.
16