Midea FP-74SBC015LMTL-B1 User manual

FP-74SBC015LMTL-B1
TABLE BLENDER
Table Blender.

IMPORTANT SAFETY INSTRUCTIONS.
PART NAME
TECHNICAL DATA OF THE PRODUCT
INSTRUCTIONS FOR USE
IMPORTANT NOTE: Please read the manual carefully before operating your
product. Retain it for future reference.
CLEANING AND MAINTENANCE
CIRCUIT PRINCIPLE DIAGRAM
ABNORMALITY ANALYSIS AND HANDLING
1
3
3
4
8
8
9
10
RECIPES

1
When using electrical appliances, basic safety precautions should
always be followed including the following:
There is a potential injury from misuse. Please handle it with care.
Always disconnect the appliance from the supply if it is left unattended
and before assembling, disassembling or cleaning.
This appliance shall not be used by children. Keep the appliance and its
cord out of children reach.
Appliances can be used by persons with reduced physical, sensory or
mental capabilities or lack of experience and knowledge if they have
been given supervision or instruction concerning use of the appliance in
a safe way and if they understand the hazards involved.
Children shall not play with the appliance.
Be careful when handing the sharp cutting blades, emptying the bowl and
during cleaning.
Be careful if hot liquid is poured into blender as it can be ejected out of
the appliance due to a sudden steaming.
Switch off the appliance and disconnect from supply before changing
accessories or approaching parts that move in use.
This appliance is intended to be used in household and similar
applications such as:
– Staff kitchen areas in shops, offices and other working environments;
– Farm houses;
– By clients in hotels, motels and other residential type environments;
– Bed and breakfast type environments.
This appliance conforms to EC Regulation 1935/2004 on materials and
articles intended to come into contact with food.
Do not exceed the maximum indication on the blender jar, the mill(specific
types only)beaker and the chopper bowl (specific types only).
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
If food sticks to the wall of the blender jar, switch off the appliance and
unplug it. them use a spatula to remove the food from the wall.
Never fill the blender jar with ingredients hotter than 80°C.
The appliance can only be switched on if the blender jar or the beaker is
assembled on the motor unit correctly.
Do not let the appliance run for more than 2 minutes (Mill:30 seconds) at
a time. let the appliance cool down to room temperature before you
continue processing.
If the supply cord is damaged, it must be replaced by the manufacturer, its
service agent or similarly qualified persons in order to avoid a hazard.
IMPORTANT SAFETY INSTRUCTIONS

2
The failure to follow any of the important safeguards and the important
instructions for safe use is a misuse of your table blender that can void
your warranty and create the risk of serious injury.
Caution:
Ensure that the blender is switched off before removing
Caution:
There is a potential injury from misuse. Please handle it with care.
Always disconnect the appliance from the supply if it is left unattended
and before assembling, disassembling or cleaning.
This appliance shall not be used by children. Keep the appliance and its
cord out of children reach.
Appliances can be used by persons with reduced physical, sensory or
mental capabilities or lack of experience and knowledge if they have
been given supervision or instruction concerning use of the appliance in
a safe way and if they understand the hazards involved.
Children shall not play with the appliance.
Be careful when handing the sharp cutting blades, emptying the bowl and
during cleaning.
Be careful if hot liquid is poured into blender as it can be ejected out of
the appliance due to a sudden steaming.
Switch off the appliance and disconnect from supply before changing
accessories or approaching parts that move in use.
This appliance is intended to be used in household and similar
applications such as:
– Staff kitchen areas in shops, offices and other working environments;
– Farm houses;
– By clients in hotels, motels and other residential type environments;
– Bed and breakfast type environments.
This appliance conforms to EC Regulation 1935/2004 on materials and
articles intended to come into contact with food.
Do not exceed the maximum indication on the blender jar, the mill(specific
types only)beaker and the chopper bowl (specific types only).
12.
13.
14.
15.
16.
If food sticks to the wall of the blender jar, switch off the appliance and
unplug it. them use a spatula to remove the food from the wall.
Never fill the blender jar with ingredients hotter than 80°C.
The appliance can only be switched on if the blender jar or the beaker is
assembled on the motor unit correctly.
Do not let the appliance run for more than 2 minutes (Mill:30 seconds) at
a time. let the appliance cool down to room temperature before you
continue processing.
If the supply cord is damaged, it must be replaced by the manufacturer, its
service agent or similarly qualified persons in order to avoid a hazard.
SAVE THESE INSTRUCTION.
THIS UNIT IS INTENDED FOR HOUSEHOLD USE ONLY.
IMPORTANT SAFETY INSTRUCTIONS

3
PART NAME
TECHNICAL DATA OF THE PRODUCT
Model No. Rated voltage Rated frequency Rated power
FP-74SBC015LMTL-B1 230V~ 60Hz 300W
Product name
TABLE BLENDER
Capacity
1.5L
No. Description
1
2
3
4
5
Measuring cup
Blender jar cover
Blender jar (1.5L)
Blender jar seal
Blade system
6 Speed control dial
7
8
200ml jar
Jar seal
9Grinder blade system
1
2
3
4
5
6
ACCESSORIES (Optional)
7
8
9

4
INSTRUCTIONS FOR USE
Table blender
9
12
11
10

5
INSTRUCTIONS FOR USE
Grinder
9

6
INSTRUCTIONS FOR USE
Hot liquids can erupt during blending. Do not blend hot liquids.
Warning:
Many recipes process best with a combination of speeds with occassional use of
pulse.
Momentary burst of high power.
Low speed to combine more delicate foods with a folding motion, and is good for
combining wet and dry ingredients.
High speed is ideal for breaking down ingredients to make ice based drinks and
other finely blended mixtures.
Run the blender only for the appropriate amount of time required.
Do not over blend ingredients.
Use the PULSE setting when food is too thick or coarse to circulate within the
blender jug.
Do not exceed the maximum mark.
If any moisture or liquid appears on top of the motor base during blending, turn the
blender off and unplug at the wall. Remove the blender jug, and wipe motor base
MOTOR BASE SPEED CONTROL
BLENDING JUG
PULSE
CHOP (speed 1)
LIQUIFY (speed 2)
Before first use
Functions (Speed)
Before using your blender for the first time, remove any packaging material and
promotional labels.
Be careful when handling the blades as they are extremely sharp.
Wash the jug, lids, blade assembly and attachments in warm soapy water with a
soft cloth. Rinse and dry thoroughly. All parts (except motor base) may be
washed in the dishwasher, on the top shelf.
immediately with a dry cloth or paper towel.
The maximum amount of ice cubes that the blender can process is 8 cubes from a
standard ice tray.
Use the PULSE function for foods that only require short bursts of power,such as
chopping nuts and crushing ice.
When blending drinks with ice cubes or frozen fruit, use PULSE in short bursts.
Thicker mixtures puree more efficiently if the jar is too full.
Do not use metal utensils, as they may damage the blades or blender jar.
Do not blend a heavy mixture for more than 10 seconds. For normal blending tasks,
do not blend longer than 1 minutes at a time. If you need to blend longer, turn off the
blender and stir ingredients before starting again.
This rest will help protect the motor from wear and tear.
The blender will not knead dough, or mash potatoes.
When blending warm ingredients, do not put more than 2 blending bottles at a time
in.
Do not blend hot or boiling ingredients. Allow food to cool down to a warm state
before placing in the blender. This is to safeguard against sudden bursts of steam
that could cause the lid to dislodge.
If blending warm ingredients, place a tea towel over the lid and hold down firmly.

INSTRUCTIONS FOR USE
7
Overload protection system
immediately with a dry cloth or paper towel.
The maximum amount of ice cubes that the blender can process is 8 cubes from a
standard ice tray.
Use the PULSE function for foods that only require short bursts of power,such as
chopping nuts and crushing ice.
When blending drinks with ice cubes or frozen fruit, use PULSE in short bursts.
Thicker mixtures puree more efficiently if the jar is too full.
Do not use metal utensils, as they may damage the blades or blender jar.
Do not blend a heavy mixture for more than 10 seconds. For normal blending tasks,
do not blend longer than 1 minutes at a time. If you need to blend longer, turn off the
blender and stir ingredients before starting again.
This rest will help protect the motor from wear and tear.
The blender will not knead dough, or mash potatoes.
When blending warm ingredients, do not put more than 2 blending bottles at a time
in.
Do not blend hot or boiling ingredients. Allow food to cool down to a warm state
before placing in the blender. This is to safeguard against sudden bursts of steam
that could cause the lid to dislodge.
If blending warm ingredients, place a tea towel over the lid and hold down firmly.
Machine running time can not be more than 3 minutes. After the shutdown, it is
necessary to let it fully heat, cooling to room temperature.
The MAX line is usually a good indicator to prevent overly heavy loading, however
some especially dense combinations of ingredients may still strain the motor. If the
motor seems to be straining or running slowly, only operate for 10 seconds at a time,
or reduce the amount of ingredients used. Adding more liquid can also help to loosen
dense mixtures.
Do not process hot foods or liquids in blender.
Do not store food or liquids in the blender jar.
Avoid bumping or dropping the blender.
Note:

In case of abnormalities such as abnormal noises, smell, smoke, etc., you should
immediately cut off power and stop use.
If the product cannot work, please check if the power supply is connected, if the switch is
put to the ON position and if fittings are installed in place.
If the product still cannot work after checks mentioned above, please consult the
designated repair centre for maintenance.
ABNORMALITY ANALYSIS AND HANDLING
Abnormality Handling
8
1.
2.
3.
Motor doesn’t start or
blade doesn’t rotate
Food is lumpy or
unevenly chopped
Food is chopped too
fine or is watery
Food sticks to
blade and jug
Blender stopped
suddenly while in use
• Check that the power plug is properly inserted into the power outlet.
• This can happen when too much food is being blended at one time.
Try a smaller amount, and work in batches if necessary.
• The ingredients may be too large. Try cutting into smaller pieces.
For best results, ingredients should be in pieces no larger than 2cm.
• Try blending for shorter period of time. Use PULSE for better control.
Food sticks
• The mixture may be too thick. Try adding more liquid, pulsing, and/or using
a slower speed for blending.
• We recommend blending in smaller batches, or cutting ingredients into
smaller batches.
This blending chart should be used as a guide only.
Note:
RECIPES
Ice or frozen
fruit
Grinder
Frozen no larger
than standard ice
tray
Coffee bean
Max 8pieces
50g
Pulse;
Liquify (speed 2)
Speed 2
60 secs
30 secs
Food Preparation Quantity Functions
(Speed) Time
Smoothie Milk, fruit, yoghurt,
ice cream Max 800ml Chop (speed 1);
Liquify (speed 2) 60 secs
Blended soups
Cool to room temp
800ml Chop (speed 1) 50-60 secs
E.g. 600g carrots cut into 2cm cube and soaked in water for 24 hours + 900g water