Midea BL2526 User manual

USER MANUAL
BL2526
CONTENT
IMPORTANT SAFETY INSTRUCTIONS.
PART NAME
TECHNICAL DATA OF THE PRODUCT
INSTRUCTIONS FOR USE
IMPORTANT NOTE: Please read the manual carefully before operating your
product. Retain it for future reference.
CLEANING AND MAINTENANCE
CIRCUIT PRINCIPLE DIAGRAM
ABNORMALITY ANALYSIS AND HANDLING
1
3
3
4
7
8
9
10
TABLE BLENDER
RECIPES

To avoid the risk of serious injury when using your blender, basic
safety precautions should be followed, including the following.
READ ALL INSTRUCTIONS, SAFEGUARDS, AND WARNINGS
BEFORE OPERATING BLENDER
There is a potential injury from misuse. Please handle it with care.
Always disconnect the appliance from the supply if it is left unattended
and before assembling, disassembling or cleaning.
This appliance shall not be used by children. Keep the appliance and its
cord out of children reach.
Appliances can be used by persons with reduced physical, sensory or
mental capabilities or lack of experience and knowledge if they have
been given supervision or instruction concerning use of the appliance in
a safe way and if they understand the hazards involved.
Children shall not play with the appliance.
Be careful when handing the sharp cutting blades, emptying the bowl
and during cleaning.
Be careful if hot liquid is poured into blender as it can be ejected out of
the appliance due to a sudden steaming.
Switch off the appliance and disconnect from supply before changing
accessories or approaching parts that move in use.
This appliance is intended to be used in household and similar
applications such as:
– Staff kitchen areas in shops, offices and other working environments;
– Farm houses;
– By clients in hotels, motels and other residential type environments;
– Bed and breakfast type environments.
– This appliance conforms to EC Regulation 1935/2004 on materials
1.
2.
3.
4.
5.
6.
7.
8.
9.
1
IMPORTANT SAFETY INSTRUCTIONS

There is a potential injury from misuse. Please handle it with care.
Always disconnect the appliance from the supply if it is left unattended
and before assembling, disassembling or cleaning.
This appliance shall not be used by children. Keep the appliance and its
cord out of children reach.
Appliances can be used by persons with reduced physical, sensory or
mental capabilities or lack of experience and knowledge if they have
been given supervision or instruction concerning use of the appliance in
a safe way and if they understand the hazards involved.
Children shall not play with the appliance.
Be careful when handing the sharp cutting blades, emptying the bowl
and during cleaning.
Be careful if hot liquid is poured into blender as it can be ejected out of
the appliance due to a sudden steaming.
Switch off the appliance and disconnect from supply before changing
accessories or approaching parts that move in use.
This appliance is intended to be used in household and similar
applications such as:
– Staff kitchen areas in shops, offices and other working environments;
– Farm houses;
– By clients in hotels, motels and other residential type environments;
– Bed and breakfast type environments.
– This appliance conforms to EC Regulation 1935/2004 on materials
10.
2
and articles intended to come into contact with food.
If the supply cord is damaged, it must be replaced by the manufacturer,
its service agent or similarly qualified persons in order to avoid a hazard.
SAVE THESE INSTRUCTION.
THIS UNIT IS INTENDED FOR HOUSEHOLD USE ONLY.
Ensure that the blender is switched off before removing
The failure to follow any of the important safeguards and the important
instructions for safe use is a misuse of your blender that can void your
warranty and create the risk of serious injury.
Caution:
IMPORTANT SAFETY INSTRUCTIONS
This appliance is equipped with motor themal protector. If the
appliance overheats, it switches off automatically. Unplug the
appliance and let it cool down until room temperature then put the
mains plug back into the power outlet and switch on the appliance
again. Please contact your dealer or an authorized service center if it
is activated too often.
Safety system

3
PART NAME
TECHNICAL DATA OF THE PRODUCT
Product name Model No. Rated voltage Rated frequency Rated power
TABLE BLENDER BL2526 220-240V~ 50-60Hz 1000W
No. Description
1
2
3
4
5
Measuring cup
Jar lid
Glass jar (1.5L)
Blade system
Speed control dial
6Jar cover
7600ml jar
8Blade system
9Glass grinder jar
10 Grinder blade system
1
2
3
4
5
6
7
8
9
10
ACCESSORIES (optional)
GrinderPersonal blender
Optional glass jar

4
INSTRUCTIONS FOR USE
9
11
10
TABLE BLENDER
Functions (Speed)
MOTOR BASE SPEED CONTROL
1 2 3
4 5 6
7 8
10 11
9

5
INSTRUCTIONS FOR USE
Fill the bottle with your favorite ingredients. Be sure not to fill ingredients over he
600ml marking.
Fasten the blade assembly on the open end of the bottle.
Turn the bottle upside down, line up arrow “▲”on the blade assembly to the lock “
” on the base, place the bottle in the base by pressing and simply turn the bottle
clockwise to lock “▲” on the base.
Place the blender base on a flat surface and plug in it. Pressing switch, the
blender will start to work, release switch to stops working.
After the in gredients are fully blended, stop the blender working, and turned
counterclockwise rotation the bottle , take out the bottle form the base.
Replace the blade assembly to use.
1.
2.
3.
9
PERSONAL BLENDER
Many recipes process best with a combination of speeds with occassional use of pulse.
Momentary burst of high power.
Low speed to combine more delicate foods with a folding
motion, and is good for combining wet and dry ingredients.
High speed is ideal for breaking down ingredients to make ice
based drinks and other finely blended mixtures.
PULSE
CHOP (speed 1)
LIQUIFY (speed 2)
1 2 3
4 5 6
7 8 9

6
INSTRUCTIONS FOR USE
Fill the bottle with your favorite ingredients. Be sure not to fill ingredients over he
600ml marking.
Fasten the blade assembly on the open end of the bottle.
Turn the bottle upside down, line up arrow “▲”on the blade assembly to the lock “
” on the base, place the bottle in the base by pressing and simply turn the bottle
clockwise to lock “▲” on the base.
Place the blender base on a flat surface and plug in it. Pressing switch, the
blender will start to work, release switch to stops working.
After the in gredients are fully blended, stop the blender working, and turned
counterclockwise rotation the bottle , take out the bottle form the base.
Replace the blade assembly to use.
4.
5.
6.
Before first use
Before using your blender for the first time, remove any packaging material and
promotional labels.
Be careful when handling the blades as they are extremely sharp.
Wash the jug, lids, blade assembly and attachments in warm soapy water with a soft
cloth. Rinse and dry thoroughly. All parts (except motor base) may be washed in the
dishwasher, on the top shelf.
GRINDER
1 2 3
4 4
5 6
9
7 8 9

7
INSTRUCTIONS FOR USE
Blending programs
The blending times in the chart below are not approximate and should be adjusted to
suit your own tastes, different food quantities and food manufacturer’s instructions.
Overload protection system
Machine running time can not be more than 3 minutes. After the shutdown, it is
necessary to let it fully heat, cooling to room temperature.
The MAX line is usually a good indicator to prevent overly heavy loading,
however some especially dense combinations of ingredients may still strain the
motor. If the motor seems to be straining or running slowly, only operate for 10
seconds at a time, or reduce the amount of ingredients used. Adding more liquid
can also help to loosen dense mixtures.
Do not process hot foods or liquids in blender.
Do not store food or liquids in the blender jar.
Avoid bumping or dropping the blender.
Note:
RECIPES
Hot liquids can erupt during blending. Do not blend hot liquids.
This product is not suitable for mixing dry food. Never run the appliance empty.
Caution:
Turn the control knob to PLUSE at any time to bring the motor to max speed. If
used for 3 minutes, the appliance will switch off automatically. Wait 3 minutes
before using the appliance again.
Turn the control knob to OFF position to finish the program during operation early.
Turn the control knob to OFF position to stop any program during operation and
switch the appliance off.
Tip:
Food Preparation Quantity Functions (speed) Time
Smoothie
Blended soups
Milk, fruit, yoghurt,
ice cream
Cool to room temp
Max 800ml
800ml
Chop(speed 1);
Liquify (speed 2)
Chop (speed 1)
60 secs
Ice or frozen fruit Frozen no larger than
standard ice tray
Max 8pieces Pulse;
Liquify (speed 2) 60 secs
50-60 secs
Carrots juicer Carrots,water
600g carrots,900g water speed 2 120 secs

8
In case of abnormalities such as abnormal noises, smell, smoke, etc., you should
immediately cut off power and stop use.
If the product cannot work, please check if the power supply is connected, if the
switch is put to the ON position and if fittings are installed in place.
If the product still cannot work after checks mentioned above, please consult the
designated repair centre for maintenance.
ABNORMALITY ANALYSIS AND HANDLING
Abnormality Handling
1.
2.
3.
Fault Analysis and Elimination
The appliance is not
working
•Appliance not plugged in
•Wall outlet not energized
•Appliance not switched on
•Overheated appliance
•Over current protection
activated
•Too much food in the jar
•Malfunctioning appliance
•Insert the plug into the wall outlet
•Check fuses and circuit breaker
•Turn the control knob to the setting position to
place the appliance in standby mode.
•Turn the control knob to the OFF position,
unplug the appliance from the wall outlet and
allow to cool down before using it again
•Turn the control knob to the OFF position
to switch the appliance o
ff.
Resume blending operation.
•Turn the control knob to the OFF position,
remove some food, shake ingredients to
redistribute and restart blending operation
•Turn the control knob to the OFF position,
unplug the appliance from the wall outlet and
contact qualified personnel to check and repair
the appliance
The blades are
rotating very slowly
•Too much food in the jar /
Motor is overloaded
•Not enough liquid in the jar
/ Motor is overloaded
•Turn the control knob to the OFF position,
remove some food, shake ingredients to
redistribute and restart blending operation
•Turn the control knob to the OFF position,
add some liquid and restart blending operation
Food not fully
blended
•Ingredients too large
•Too much food in the jar
•Turn the control knob to the OFF position,
remove ingredients and cut them into smaller
pieces
•Turn the control knob to the OFF position,
remove some food, shake the jar to
redistribute the ingredients and then restart
blending operation
Water leakage •Parts not tightly secured
•Missing seal ring on the lid
•Damaged seal ring on the
lid
•Damaged seal ring on the
blade unit
•Check and secure the parts carefully
•Place the required seal
•Replace with a proper new seal
•Replace the blade unit
Problem Cause Solution

9
Unplug the power cord from the power outlet after use for safety reasons.
To clean the motor base, wipe with a soft, damp cloth then dry thoroughly. Wipe any
excess food particles from the power cord.
Avoid allowing food residue to dry on. Follow these steps as soon as possible after
use:
• Rinse most of the residue off the jug, blades and lids.
• Hand wash in warm, soapy water using a mild liquid detergent and non-abrasive
sponge.
Jug, blades and lids
Motor base
Do not use abrasive scouring pads or cleaners on either the motor base or any part
of the blender, as they may scratch the surface. Use only warm soapy water with a
soft cloth.
Cleaning agents
The jug, lids and blade assembly may be washed in the dishwasher on the top shelf
only.
Dishwasher
Cat hazard: Blades in jar are very sharp. Use caution when cleaning.
Warning:
CLEANING AND MAINTENANCE
Cleaning

10
Strong smelling foods such cumin and coriander, and some vegetables such as
carrots may leave an odour or stain.
To remove, pour warm soapy water and fill to the MAX mark. Set aside to soak for 5
minutes. Then wash with a mild detergent and warm water, rinse well and dry
thoroughly. Store blending bottle and jug with lids off.
Store your blender upright with the blender jug assembled on the motor base, or
beside it. Do not place anything on top. To allow air to circulate, keep the lid off.
Stubborn food stains and odours
The appliance must not be disposed of with regular household waste.
At the end of its service life, the appliance must be properly delivered
to a collection point for the recycling of electrical and electronic
equipment. By Collection By Collection and recycling of old appliances,
you are making an important contribution to the conservation of our
natural resources and provide for environmentally sound and healthy
disposal.
Environmental protection
CLEANING AND MAINTENANCE
Maintaining
CIRCUIT PRINCIPLE DIAGRAM
ACN
ACL
CX101
R101
R102
SW101
SW102
D101
MT101
MT102
6A10

尺寸：148X210mm
页码：11页
材质 : 80G 书纸
印刷颜色：单色印刷（黑色）
印刷版面：双面印刷
装钉：骑马钉
警告语：首字母字体高度3.03（12pt)
项目
库
文件名
A
1246
35
B
C
D
E
F
G
A
B
C
D
E
F
G
说明书
BL2526
1 1
1:1
会 签
K
HH
材质:80G 书纸
任志梅
2018-02-05
制 图
设 计
审 核
标准化
审 定
日 期
标记 处 数 更改 文 件号 签 字 日 期
重点
校对项
1.结构尺寸
2.材质标注
3.物料编码
4.颜色标注
5.客户型号
6.电压功率
7.认证信息
8.条码数字
9.产品名称
古广君
文达宏
-----
文达宏
-----
主力智业（深圳）电器实业有限公司
38-2526-01998
认 证 符官文