Midea BL-1190 User manual

BL1190 (6118)
USER MANUAL
TABLE BLENDER
Warning notices: Before using this product, please read this manual carefully and keep it for future
reference. The design and specifications are subject to change without prior notice for product
improvement. Consult with your dealer or manufacturer for details.
The diagram above is just for reference. Please take the appearance of the actual product as the standard.

THANK YOU LETTER
Thank you for choosing Midea! Before using your new Midea product, please read
this manual thoroughly to ensure that you know how to operate the features and
functions that your new appliance offers in a safe way.
CONTENTS
0
02
1
06
07
1 5
1 4
16
1 3
08
1 7
THANK YOU LETTER
SAFETY INSTRUCTIONS
SPECIFICATIONS
PRODUCT OVERVIEW
OPERATION INSTRUCTIONS
CLEANING AND MAINTENANCE
TROUBLESHOOTING
TRADEMARKS, COPYRIGHTS AND LEGAL STATEMENT
DISPOSAL AND RECYCLING
DATA PROTECTION NOTICE
01
EN

Danger
This symbol indicates that there are dangers to the life and health of
Warning of electrical voltage
This symbol indicates that there is a danger to life and health of
persons due to voltage.
Warning
The signal word indicates a hazard with a medium level of risk which, if
not avoided, may result in death or serious injury.
Caution
The signal word indicates a hazard with a low degree of risk which, if
not avoided, may result in minor or moderate injury.
Attention
The signal word indicates important information (e.g. damage to
property), but not danger.
Observe instructions
This symbol indicates that a service technician should only operate and
maintain this appliance in accordance with the operating instructions.
Read these operating instructions carefully and attentively before using/commissioning the
unit and keep them in the immediate vicinity of the installation site or unit for later use!
Intended Use
Explanation of Symbols
SAFETY INSTRUCTIONS
02
The following safety guidelines are intended to prevent unforeseen risks or damage from
unsafe or incorrect operation of the appliance. Please check the packaging and appliance on
arrival to make sure everything is intact to ensure safe operation. If you find any damage,
please contact the retailer or dealer. Please note modifications or alterations to the appliance
are not allowed for your safety concern. Unintended use may cause hazards and loss of
warranty claims.
persons due to extremely flammable gas.
EN

03
IMPORTANT SAFETY INSTRUCTIONS
READ ALL INSTRUCTIONS, SAFEGUARDS, AND
WARNINGS BEFORE OPERATING BLENDER
• There is a potential injury from misuse. Please handle
it with care.
• Always disconnect the appliance from the supply if
it is left unattended and before assembling, disas-
sembling or cleaning.
• This appliance shall not be used by children. Keep
the appliance and its cord out of children reach.
• Appliances can be used by persons with reduced
physical, sensory or mental capabilities or lack of
experience and knowledge if they have been given
supervision or instruction concerning use of the
appliance in a safe way and if they understand the
hazards involved.
• Children shall not play with the appliance.
• Be careful when handing the sharp cutting blades,
emptying the bowl and during cleaning.
• Be careful if hot liquid is poured into blender as it
can be ejected out of the appliance due to a sudden
steaming.
• Switch off the appliance and disconnect from supply
before changing accessories or approaching parts
that move in use
• This appliance is intended to be used in household
and similar applications such as:
- Staff kitchen areas in shops, offices and other
working environments;
– Farm houses;
– By clients in hotels, motels and other residential
type environments;
– Bed and breakfast type environments.
– This appliance conforms to EC Regulation
1935/2004 on materials and articles intended to
come into contact with food.
• If the supply cord is damaged, it must be replaced
by the manufacturer, its service agent or similarly
qualified persons in order to avoid a hazard.
To avoid the risk of serious injury when using your
table blender, basic safety precautions should be
followed, including the following.
EN

SAVE THESE INSTRUCTION.
THIS UNIT IS INTENDED FOR HOUSEHOLD USE ONLY.
04
• There is a potential injury from misuse. Please handle
it with care.
• Always disconnect the appliance from the supply if
it is left unattended and before assembling, disas-
sembling or cleaning.
• This appliance shall not be used by children. Keep
the appliance and its cord out of children reach.
• Appliances can be used by persons with reduced
physical, sensory or mental capabilities or lack of
experience and knowledge if they have been given
supervision or instruction concerning use of the
appliance in a safe way and if they understand the
hazards involved.
• Children shall not play with the appliance.
• Be careful when handing the sharp cutting blades,
emptying the bowl and during cleaning.
• Be careful if hot liquid is poured into blender as it
can be ejected out of the appliance due to a sudden
steaming.
• Switch off the appliance and disconnect from supply
before changing accessories or approaching parts
that move in use
• This appliance is intended to be used in household
and similar applications such as:
- Staff kitchen areas in shops, offices and other
working environments;
– Farm houses;
– By clients in hotels, motels and other residential
type environments;
– Bed and breakfast type environments.
– This appliance conforms to EC Regulation
1935/2004 on materials and articles intended to
come into contact with food.
• If the supply cord is damaged, it must be replaced
by the manufacturer, its service agent or similarly
qualified persons in order to avoid a hazard.
CAUTION
• In order to avoid a hazard due to inadvertent
resetting of the thermal cut-out, this appliance must
not be supplied through an external switching
device, such as a timer, or connected to a circuit that
is regularly switched on and off by the utility. ( for
MTP version motor )
CAUTION
• Ensure that the blender is switched off before
removing
• The failure to follow any of the important safeguards
and the important instructions for safe use is a
misuse of your hand blender that can void your
warranty and create the risk of serious injury.
EN

05
SAFETY SYSTEM
This appliance is equipped with motor themal
protector. If the appliance overheats, it switches off
automatically. Unplug the appliance and let it cool
down until room temperature then put the mains plug
back into the power outlet and switch on the
appliance again. Please contact your dealer or an
authorized service center if it is activated too often
.(for MTP)
EN

SPECIFICATIONS
BL1190 (6118)Model No.
Rated voltage
Rated frequency
Rated power
220-240V~
50-60Hz
750W
06
Circuit Principle Diagram
Model
SWITCH
220V-240V~
S1
220V-240V/50-60Hz AC MOTOR
C1
123
R1
FUSE (option MTP)
M
(PULSE)
Plastic jug Motor information Main unit Product name Glass jug
PIC
Fuse (Option MTP)
Fuse (Option MTP)
BL1190
MTP
MTP
BL1190 A
BL1190 B
BL1190 C
Grinder
EN

PRODUCTOVERVIEW
Part Name
Accessories (Optional)
NOTE
The figure belowis for referenceonly, and the details are subject to the actual objects in
the packaging box.
0
Measuring cup
jar cover
1.5 litre glass jug
Jar seal
Switch knob
1.5 litre plastic jug Grinder
Glass Grinder Jar
Grinder blade
system
Blade collar assembly
EN

OPERATION INSTRUCTIONS
Instructions for Use
0
Before First Use
• Before using your blender for the first time,
remove any packaging material and
promo-tional labels.
• Be careful when handling the blades as they are
extremely sharp.
• Wash the jug, lids, blade assembly and
attachments in warm soapy water with a soft
cloth. Rinse and dry thoroughly. All parts
(except motor base) may be washed in the
dishwasher, on the top shelf.
Functions (Speed)
MOTOR BASE SPEED CONTROL
Many recipes process best with a combination of
speeds with occassional use of pulse.
CHOP (speed 1)
Low speed to combine more delicate foods with
a folding motion, and is good for
combining wet and dry ingredients.
PULSE
Momentary burst of high power.
1
2
3
4
EN

5
6
7
8
9
LIQUIFY (speed 2)
High speed is ideal for breaking down ingredients
to make ice based drinks and other finely
blend-ed mixtures.
CAUTION
Tip
Hot liquids can erupt during blending. Do not
blend hot liquids.
• Run the blender only for the appropriate
amount of ime required.
• Do not over blend ingredients.
• Use the PULSE setting when food is too thick
or coarse to circulate within the blender jug.
• Do not exceed the maximum mark.
• If any moisture or liquid appears on top of the
motor base during blending, turn the blender
off and unplug at the wall. Remove the blender
jug, and wipe motor base immediately with a
dry cloth or paper towel.
• The maximum amount of ice cubes that the
blender can process is 8 cubes from a standard
ice tray.
• Use the PULSE function for foods that only
require short bursts of power, such as
chopping nuts and crushing ice.
• When blending drinks with ice cubes or frozen
fruit, use PULSE in short bursts.
• Thicker mixtures puree more efficiently if the
jug is too full.
• Do not use metal utensils, as they may damage
the blades or blender jug.
• Do not blend a heavy mixture for more than 10
seconds. For normal blending tasks, do not
blend longer than 1 minutes at a time. If you
need to blend longer, turn off the blender and
stir ingredients before
EN

10
Grinder
NOTE
• Do not process hot foods or liquids in blender.
• Do not store food or liquids in the blender jar.
• Avoid bumping or dropping the blender.
Portable handle design
10
11
12
Tip
• Starting again.
• This rest will help protect the motor from wear
and tear.
• The blender will not knead dough, or mash
potatoes.
• When blending warm ingredients, do not put
more than 2 blending bottles at a time in.
• Do not blend hot or boiling ingredients. Allow
food to cool down to a warm state before
placing in the blender. This is to safeguard
against sudden bursts of steam that could
cause the lid to dislodge.
• If blending warm ingredients, place a tea towel
over the lid and hold downfirmly.
1 2
EN

11
3
5 6
7 8
4
Tip
Overload protection system
• Machine running time can not be more than 3 minutes. After the shutdown, it is
necessary to let it fully heat, cooling to room temperature.
• The MAX line is usually a good indicator to prevent overly heavy loading, however
some especially dense combinations of ingredients may still strain the motor. If the
motor seems to be straining or running slowly, only operate for 10 seconds at a time,
or reduce the amount of ingredients used. Adding more liquid can also help to loosen
dense mixtures.
EN

12
Food Preparation Quantity Functions
(Speed) Time
Blended
Smoothie
soups
Milk, fruit,
yoghurt,
ice cream
Max 800ml
800ml
Cool to room
temp
Chop(speed 1)
Chop(speed 1);
Liquify (speed 2) 60 secs
frozen fruit
Ice or Max 8pieces
Frozen no larger
than standard ice
tray
Pulse;
Liquify (speed 2) 60 secs
Grinder
Carrots
juicer Carrots,water
50-60 secs
50g
600g carrots
900g water
Coffee bean speed 2
speed 2
30secs
120secs
NOTE
• This blending chart should be used as a guide only.
EN

13
CLEANING AND MAINTENANCE
Cleaning
• Rinse most of the residue off the jug, blades and lids.
• Hand wash in warm, soapy water using a mild liquid detergent and non-abrasive
sponge.
123
Cleaning appliance body、chopper lid、whisk body
CAUTION
Cat hazard: Blades in jar are very sharp. Use caution when cleaning.
Unplug the power cord from the power outlet after use for safety reasons.
Jug, blades and lids
Avoid allowing food residue to dry on. Follow these steps as soon as possible after use:
Motor base
To clean the motor base, wipe with a soft, damp cloth then dry thoroughly. Wipe any
excess food particles from the power cord.
Cleaning agents
Do not use abrasive scouring pads or cleaners on either the motor base or any part of
the blender, as they may scratch the surface. Use only warm soapy water with a soft
cloth.
Dishwasher
The jug, lids and blade assembly may be washed in the dishwasher on the top shelf only.
Stubborn food stains and odours
Strong smelling foods such cumin and coriander, and some vegetables such as carrots
may leave an odour or stain.
To remove, pour warm soapy water and fill to the MAX mark. Set aside to soak for 5
minutes. Then wash with a mild detergent and warm water, rinse well and dry
thoroughly. Store blending bottle and jug with lids off.
Storage
Store your blender upright with the blender jug assembled on the motor base, or beside
it. Do not place anything on top. To allow air to circulate, keep the lid off.
EN

14
TROUBLESHOOTING
Operation of your appliance can lead to errors and malfunctions. The following tables
contain possible causes and notes for resolving an error message or malfunction. It is
recommended to read the tables carefully below in order to save your time and money
that may cost for calling to the service center.
Abnormality Analysis and Handling
Abnormality Handling
Fault Analysis and Elimination
1. IIn case of abnormalities such as abnormal noises, smell, smoke, etc., you should
immediately cut off power and stop use.
2. If the product cannot work, please check if the power supply is connected, if the
switch is put to the ON position and if fittings are installed in place.
3. If the product still cannot work after checks mentioned above, please consult the
designated repair centre for maintenance.
Motor doesn’t start or
blade doesn’t rotate
• Check that the power plug is properly inserted into the
power outlet.
Food is chopped too fine
or is watery
• Try blending for shorter period of time. Use PULSE for
better control. Food sticks
Food sticks to blade and
jug
• The mixture may be too thick. Try adding more liquid,
pulsing, and/or using a slower speed for blending.
Blender stopped
suddenly while in use
• We recommend blending in smaller batches, or cutting
ingredients into smaller batches.
Food is lumpy or
unevenly chopped
• This can happen when too much food is being blended at
one time. Try a smaller amount, and work in batches if
necessary.
• The ingredients may be too large. Try cutting into smaller
pieces. For best results, ingredients should be in pieces
no larger than 2cm.
EN

15
logo, word marks, trade name, trade dress and all versions there of are
trademarks, copyrights and other intellectual property rights, and all goodwill derived
valuable assets of Midea Group and/or its affiliates (“Midea”), to which Midea owns
from using any part of an Midea trademark. Use of Midea trademark for commercial
purposes without the prior written consent of Midea may constitute trademark
infringement or unfair competition in violation of relevant laws.
This manual is created by Midea and Midea reserves all copyrights thereof. No entity or
individual may use, duplicate, modify, distribute in whole or in part this manual, or
bundle or sell with other products without the prior written consent of Midea.
All the described functions and instructions were up to date at the time of printing this
manual. However, the actual product may vary due to improved functions and designs.
TRADEMARKS, COPYRIGHTS
AND LEGAL STATEMENT
EN

DISPOSAL AND RECYCLING
Important instructions for environment
Compliance with the WEEE Directive and Disposing of the Waster Product:
This product complies with EU WEEE Directive (2012/19/EU). This product bears a
classification symbol for waster electrical and electronic equipment (WEEE).
This symbol indicates that this product shall not be disposed
with other household wastes at the end of its service life. Used
recycling of electrical electronic devices. To find these
collection systems please contact to your local authorities or
retailer where the product was purchased. Each household
performs important role in recovering and recycling of old
appliance. Appropriate disposal of used appliance helps
prevent potential negative consequences for the environment
and human health.
Compliance with RoHS Directive
The product you have purchased complies with EU RoHS Directive (2011/65/EU). It does
not contain harmful and prohibited materials specified in the Directive.
Package information
Packaging materials of the product are manufactured from
recyclable materials in accordance with our National Environ-
ment Regulations. Do not dispose of the packaging materials
together with the domestic or other wastes. Take them to the
packaging material collection points designated by the local
authorities.
device must be returned to official collection point for
16
EN

DATA PROTECTION NOTICE
For the provision of the services agreed with the customer,
we agree to comply without restriction with all stipulations of applicable data protection
law, in line with agreed countries within which services to the customer will be delivered,
as well as, where applicable, the EU General Data Protection Regulation (GDPR).
Generally, our data processing is to fulfil our obligation under contract with you and for
product safety reasons, to safeguard your rights in connection with warranty and
product registration questions. In some cases, but only if appropriate data protection is
ensured, personal data might be transferred to recipients located outside of the
European Economic Area.
Further information are provided on request. You can contact our Data Protection
Officer via [email protected]. To exercise your rights such as right to object your
personal date being processed for direct marketing purposes, please contact us via
[email protected]. To find further information, please follow the QR Code.
17
EN