Midea 350125 User manual

USER MANUAL
CONTENT
IMPORTANT SAFEGUARDS
IMPORTANT NOTE: Please read the manual carefully before operating your
product. Retain it for future reference.
................................................................................................... 10
............................................................................................................................. 10
............................................................................. 9
.................................................................................................................................................. 5
........................................................................................................ 1
350125
350126
Electric Kettle
Part Name
Operating Instructions
Variable Temperature Control Guidelines
Storing Instructions
User Maintenance Instructions
........................................................................................................................ 5

1
Caution
When using electrical appliances, basic safety precautions
should always be followed, including the following:
1. Read all instructions before using.
2. Do not touch hot surfaces. Use the handle.
3. To protect against fire, electric shock and injury to per-
sons do not immerse cord, plugs, or appliance in water
or other liquid.
4. This appliance is not intended for use by persons
(including children) with reduced physical, sensory or
mental capabilities, or lack of experience and knowl-
edge, unless they have been given supervision or
instruction concerning use of the appliances by a person
responsible for their safety.
5. Close supervision is necessary when any appliance is
used by or near children.
6. This kettle is not a toy. Children should be supervised to
ensure they do not play with the appliance.
7. Unplug from outlet when not in use and before cleaning.
Allow to cool before putting on or taking off parts, and
before cleaning the appliance.
8. Do not operate any appliance with a damaged cord or
plug or after the appliance malfunctions, or it is dropped,
or has been damaged in any manner. Contact Consumer
Service for examination, repair or adjustment.
9. The use of accessory attachments not recommended by
the appliance manufacturer
may result in fire, electric shock or injury to persons.
10. This power base is designed solely for use with this
programmable kettle.
Do not attempt to use this kettle with any other power
base. Do not use the power base for other than intended
use.
11.Do not use outdoors.
IMPORTANT SAFEGUARDS

2
Caution
FOR HOUSEHOLD USE ONLY
SAVE THESE INSTRUCTIONS
12. Do not let cord hang over edge of table or counter, or
touch hot surfaces.
13. Do not place on or near a hot gas or electric burner, or
in a heated oven.
14. CAUTION: To prevent the kettle from overturning, and
to prevent damage to property or injury, always position
the power base on a stable, level surface, out of the
reach of children.
15. To disconnect, press the ON/OFF button ( ) ensuring
that the indicator light is off, then remove plug from wall
outlet.
16. Do not use appliance for other than intended use.
17. Be certain lid is securely in place before operating
appliance. Scalding may occur if the lid is opened during
heating.
18. Never use the kettle if the body or handle shows any
signs of cracks or damage.
19. Always attach plug to appliance first, then plug cord
into the wall outlet. To disconnect, turn any control to
“off”, then remove plug from wall outlet.
20. To reduce the risk of fire,
a) do not place any heating or cooking appliance
beneath the appliance.
b) do not mount unit over or near any portion of a heat-
ing or cooking appliance.
c) do not store anything directly on top of the appliance
surface when the appliance is in operation.
21. To reduce the risk of electric shock, do not mount over
a sink.
IMPORTANT SAFEGUARDS

3
1. All users of this appliance must read and understand this
instruction manual before operating or cleaning this appli-
ance.
2. The cord to this appliance should be plugged into a
220-240V AC electrical outlet only
3. Use water only in this appliance! Do not put any other
liquids or food products in this appliance. Do not mix or
add anything to the water placed in this appliance, except
as instructed in the User Maintenance Instructions to clean
the appliance.
4. Be sure kettle is filled with water to at least the MIN water
level. Do not operate appliance without water (dry) or with
an insufficient amount of water.
5. Do not fill above the MAX water level. If the kettle is
over-filled, there is a risk that boiling water may be ejected.
6. To avoid accidental scalding or burns, use extreme caution
while moving this appliance when it contains hot water, and
while pouring hot water from this appliance.
7. Keep appliance at least 4 inches away from walls or other
objects during operation. Do not place any objects on top
of appliance while it is operating. Place the appliance on a
surface that is resistant to heat.
8. If this appliance begins to malfunction during use, immedi-
ately unplug the cord.
Do not use or attempt to repair the malfunctioning appli-
ance.
9. If this appliance falls or accidentally becomes immersed in
water or any other liquid, unplug it immediately. Do not
reach into the water! Do not use this appliance after it has
ADDITIONAL IMPORTANT SAFEGUARDS
This appliance generates heat and escaping steam during
use.
Proper precautions must be taken to prevent the risk of
burns, fires, or other injury to persons or damage to
property.
Warning:

4
ADDITIONAL IMPORTANT SAFEGUARDS
fallen into or has become immersed in water. Contact Con-
sumer Service for examination and repair.
10. Do not leave this appliance unattended during use.
11. Always pour water into kettle before plugging in and heat-
ing the appliance. Never pour water into heated kettle.
12. Do not block the steam from emitting from the spout
during use.
13. Do not place this appliance in a microwave oven.
Warning:
The provided short power-supply cord should be used to
reduce the risk resulting from becoming entangled in or
tripping over a longer cord. Do not use an extension cord
with this product.
Notes On The Cord
Notes On The Plug
This appliance has a grounded 3-prong plug. Connect to a
properly grounded outlet only.
Do not attempt to modify the plug in any way.
If the electrical circuit is overloaded with other appliances,
your appliance may not operate properly. It should be oper-
ated on a separate electrical circuit from other appliances.
Electric Power
CAUTION: To prevent Plasticizers from migrating to the
finish of the counter top or table top or other furniture, place
NON-PLASTIC coasters or place mats between the appli-
ance and the finish of the counter top or table top. Failure to
do so may cause the finish to darken; permanent blemishes
may occur or stains can appear.
Plasticizer Warning:

5
Part Name
Spout
Lid
Lid Release Button
Handle
Base
No. Description
1
2
3
4
5
Before Using For The First Time
Operating Instructions
1. Read all instructions carefully.
2. Remove all packaging.
3. Boil a kettle of water following the Operating Instructions described in
this Instruction Manual.
4. Discard the boiled water. Your kettle is now ready for use.
Product may vary slightly from illustration
*3.Lid Release Button:Please press the
back end of the button (back position）。
Do not immerse power base, power cord, or plug in water or any other liquid.
CAUTION:
12
3
4
5

2. Place the kettle on power base making sure it is affixed securely.
3. Plug the power base cord into a 220-240V~ AG wall outlet. The unit
will emit an audible signal; the display screen will flash 'C' twice and
display the current water temperature in Celsius.
4. Automatic shutdown:In the standby state, the device will shut down
all displays if there is no operation within three minutes.
5. Heat preservation time:The time limit of heat preservation is two
hours;
6. Temperature selection:
1.The range of heating temperature selection is 40-100°C.
2.The range of heat preservation temperature is 40-90°C.
7. Heating:
1.While switching on, if water temperature is greater than set tempera-
ture, the device will stop heating and automatically enter the heat
preservation state.
2.If water temperature rises to set temperature, the device will stop
heating and automatically enter the heat preservation state.
6
Operating Instructions
1. Push the button on the handle to open the lid and
fill the kettle with a minimum of 0.5 litres of water.
Note:
DO NOT attempt to fill while the kettle is on the power
base.
DO NOT use for any purpose other than boiling water.
Other liquids will contaminate the interior of the kettle.
DO NOT fill past the MAX level indicated on the water
level window of the kettle. Overfilling may cause water to
spill out when boiling.
To avoid the risk of splashing while pouring hot water, make sure the lid is
securely closed onto the kettle before operation.
CAUTION:

8.Heat preservation:
1.When water is boiling and enters the heat preservation state, the device
will start timing of heat preservation;
2.During heat preservation, the error between display temperature and
actual temperature is required to be controlled within ±5°C;
3.When (set temperature - 10) ≤ water temperature ≤ (set temperature - 2),
the device will launch adjustable power heating (if the highest temperature
is 1°C higher than set temperature during the previous heat preservation,
the adjustable power ratio is 3/35; in other cases, the ratio is 4/25); When
water temperature > (set temperature - 10), the adjustable power ratio is
8/25.
9. Mode selection:
Button “ ”: Heat water to set temperature and automatically enter the heat
preservation state;
Button “ ”: Heat water to 100°C (boiling) and automatically enter the
standby state;
10.Temperature selection/ON-OFF:
Button “ ”: Cyclical selection of set temperature: 40-50-60-70-80-90°C;
Button “ ”: Enter the standby state by pressing it from the shutdown state,
while enter the shutdown state by pressing it from the standby/operation
state.
7
Operating Instructions
Note:
When the power is on, the default temperature target is 100°C or the
temperature target during the operation in the previous time.
In the non-temperature setting state, press “ ” to display the current
temperature target and enter the temperature setting state.
11.Power-on display:
When the power is on, the nixie tube is fully bright for around 0.5 second
and the device enters the standby state.
12.Temperature display:
1.The device displays real-time water temperature in standby/heating state;
2.When temperature selection/or operation begins, light always-on displays
set temperature for about one second, but the device will display current
temperature without any operation while the light flickers again for about 1.5
seconds;

3.In the heat preservation state, it displays set temperature (if water
temperature is lower than or equal to set temperature - 5°C, it displays
real-time water temperature);
4.No temperature display in the power-off state.
13.Working status indication:
1.The light will be always on when the #1 button is pressed, and will be
out after set temperature displays;
2.The light will be always on when water is heated to set temperature and
enter the heat preservation mode;
3.The light will be always on when water is heated to the boiling mode;
4.The light will flicker in the standby state and will be always on in the
working state.
14.Function prompts:
1.When the power is on, there will be a long sound;
2.With a click on buttons, there will be a short sound;
3.When heating and heat preservation finish, there will be two long sounds.
Operating Instructions
8
Note:
With a click on the shutdown button, there will be a long sound.
In the non-temperature setting state, clicking the button will make no
sound.
15.Kettle lift memory:
If the kettle body leaves the base but is put back on the base within 30
seconds, the electric kettle status will be in line with that before it is lifted;
otherwise, it will be in the standby state.
16.Dry burning protection:
After dry burning, the dry burning piece of the temperature controller will
pop up and conduct automatic protection.
17.Time-limited protection:
If the boiling time s greater than or equal to about 15 minutes, the operation
will be comprehensively finished;
If temperature does not rise in more than three minutes during water boiling,
the device will enter the shutdown state.

9
Boil-dry Protection
User Maintenance Instructions
Care & Cleaning Instructions
Descaling
A safety thermostat will automatically turn the kettle off whenever the unit is
without sufficient water, or if the kettle is allowed to boil dry. To reset the
boil-dry protection device, remove the kettle from the power base and allow
it to cool before refilling with water.
This appliance requires little maintenance. It contains no user serviceable
parts. Do not try to repair it yourself. Any servicing requiring disassembly
must be performed by a qualified appliance repair technician.
1. Make sure the kettle is unplugged and completely cool.
2. Grasp the handle and remove the kettle from the power base. If
necessary, wipe the inside and outside of the kettle with a soft, damp
cloth and wipe dry.
3. Wipe the power base with a damp cloth.
4. Make sure both the power base and kettle are completely dry after
cleaning and before use.
1. Several descalers are available. Follow the instructions provided .
2. As an alternative, use the white vinegar cleaning method:
• In a spouted bowl, prepare a descaling solution of 3 cups white vinegar
and 2 cups cool, clean water; pour into kettle. Do not boil the solution, as
Always unplug kettle and allow to cool before cleaning. Never immerse
kettle, power base, cord, or plug in water or other liquids. Never use scour-
ing pads or harsh cleansers to clean your kettle as they may damage the
surface.
CAUTION:
Note:
Mineral deposits can form a scale coating inside the kettle and may cause
an off flavor in the water or lengthen the boiling time.