Operation Manual
3.1.After the product is powered on, the kettle enters the standby status,
please click the button #4. Then, the indicator light corresponding to the
button #4 turns on, the kettle starts to boil water according to program
“1” by default, the LED display tube displays the target tea brewing
temperature, and after 3 s, the LED display tube switches to display the
real-time temperature. During water boiling, you can click the button #4
again to cancel water boiling and return to the standby status.
3.2.After water is boiled to the target temperature to brew tea, the buzzer
sounds 3 times, the indicator light corresponding to the button #1
turns on, the indicator light corresponding to the button #4 turns off,
and the kettle starts to keep warm.
3.3.When the kettle is keeping warm after water is boiled to the target
temperature to brew tea, click the button #4 to brew tea. If you
previously selected the specific tea brewing programs “1-5”, the kettle
brews tea for corresponding default tea brewing time; if you
previously selected custom tea brewing, the kettle brews tea at
custom tea brewing temperature for custom tea brewing time. After
tea brewing is finished, the kettle starts to keep warm. During tea
brewing, you can click the button #4 again to cancel tea brewing and
return to the standby status. (If the kettle is brewing tea, the indicator
light corresponding to tea brewing on the bottom right corner of the
LED display tube turns on; else, this indicator light turns off)
4. Keeping warm
4.1.The kettle starts to keep warm after water is boiled to the target
temperature. During warm keeping, if there is no operation, the kettle
stops keeping warm and turns off any display by default after 20 min.
4.2.After tea brewing is finished, the kettle starts to keep warm, and after
20 min, the kettle stops keeping warm and turns off any display.
5. Standby to save energy:
In standby mode, if there is no operation within 30 min, the product will
turn off.
7
