Mima xari User manual

1
user manual & warranty
®

32
WHAT YOU GET
You have received two boxes. Please check if all parts listed below are in there.
If anything is missing, please contact your supplier.
Hardware box: Sogoods starter box:
1 chassis with 2 baskets aached 1 seat pad with safety harness
1 seat with carrycot inside 1 carrycot apron
1 canopy 1 carrycot maress
2 front wheels
2 rear wheels
1 rain cover
basket
canopy
carrycot
apron
parking
brake
seat release buon
handlebar
height adjuster
folding lock
seat height adjuster
basket
carrying handle
seat
ENG
Dear parents, grandparents, and friends,
Thank you for choosing xari and making it part of your
family!
We have designed and developed our products
carefully, keeping in mind the comfort and safety for you
and your child. We hope you will enjoy using xari.
Please read these instrucons with care before
using it for the rst me. This will enable you to
appreciate all features and will ensure a safe usage
mima
CONTENTS
WHAT YOU GET ........................................................3
PAY ATTENTION ........................................................4
GETTING STARTED ....................................................5
FIRST SETUP
WHEELS
HANDLEBAR HEIGHT
FOLDING AND UNFOLDING
PARKING BRAKE
PHASE 1: BABY .........................................................7
CARRYCOT
PHASE 2: TODDLER ..................................................8
SAFETY HARNESS
SEAT
ACCESSORIES ...........................................................9
SAFETY BAR
CANOPY
APRON
RAIN COVER
CARE AND MAINTENANCE ....................................11
WARRANTY ............................................................12
ENG

54
PAY ATTENTION
IMPORTANT!
• Read these instrucons carefully before use and keep
them for future reference. Your child’s safety may be
aected if you do not follow these instrucons.
• This stroller is intended for children from birth and up
to 17 kg. When used for children under the age of 6
months we recommend to use the supplied carrycot
unl the child can sit unaided.
• This stroller can be used for transporng a maximum
of one child at a me. The recommended maximum
load is 17 kg.
• The maximum permied weight in each of the two
baskets is 3 kg.
WARNINGS!
• A child´s safety is your responsibility.
• It may be dangerous to leave your child unaended.
• Ensure that all the locking devices are engaged before
use.
• Do not add a maress thicker than 20 mm. Do not add
an addional maress in the carrycot, only use the one
provided by mima.
• As soon as your child can sit in the seat unaided make
sure to always use the safety harness. Ensure the
harness is ed correctly to prevent the risk of your
child sliding or falling out.
• The seat is not suitable for children under 6 months.
• Any load aached to the handle aects the stability
of xari and increases the risk of it pping over
accidentally.
• Always use the crotch strap in combinaon with the
waist belt.
• This product is not suitable for running or skang.
• Do not stand on the crossbars between the wheels.
This is unsafe and may damage the stroller.
• Check that the carrycot and/or seat are installed
correctly and securely locked in place before usage.
• Always apply the brake when standing sll even for
only a few moments! Apply brake when loading or
unloading children.
• Make sure children are clear of any moving parts
before making adjustments or folding/unfolding
stroller. Ensure that ngers are kept away from the
folding mechanism when folding the stroller.
• Do not use the stroller if any parts are damaged or
missing. It may be unsafe to use replacement parts
that or not supplied by mima.
GETTING STARTED
FIRST SETUP
1. Unfold chassis
Pull up the handlebar while holding down the p of the
chassis with your foot.
Connue to pull the handlebar towards you unl the
chassis completely unfolds and stands by itself.
WHEELS
• PleasenotetheL/Rindicaononthechassisandon
eachwheel.
2. Aach rear wheels
Press in the wheel axle hub and insert the axle into the
wheel ng.
Check if the wheels are properly aached by aempng
to pull them out again.
3. Remove rear wheels
Press in the wheel axle hub and pull out the wheel.
4. Aach front wheels
Insert the wheel rod into the wheel ng and push in
unl it clicks.
5. Front wheel swivel lock
Use the front wheel swivel lock when you are using xari
on rough terrain.
Push down the swivel lock buon to acvate.
Pull it up again to deacvate.
6. Remove front wheels
Slide the unlock buon sideways and pull out the front
wheel.
R
R
2 + 3 4 + 5
6
1
ENGENG

76
HANDLEBAR HEIGHT
7. Adjust handlebar height
Press and hold both buons located on the outside of
the handlebar and rotate the handlebar into the desired
posion.
FOLDING AND UNFOLDING
• WARNING:Childshouldnotbeneartothestroller
whenfoldingorunfolding!
• Ensurethebrakeisonwhilefoldingandunfoldingthe
chassis.Notdoingsomightcausedamagetotheseat.
8. Unfold chassis
Pull the handlebar upwards and connue to pull it
towards yourself unl the chassis completely unfolds and
stands by itself.
Rotate the handlebar into the desired posion.
9. Fold chassis (with seat aached)
• xaricanbefoldedwiththeseataached(i.e.inits
uprightposionandforwardfacing).
• xaricannotbefoldedwiththecarrycotaached.
Rotate the handlebar into posion 4 (see g. 7).
Push down the safety buon and pull the two folding
locks upwards, then lower the handlebar.
Grab the chassis at the two hinge parts and pull it
upwards so the front fork folds down.
Let the chassis stand and rest onto the front wheels.
To transport the chassis grab the carrying handle.
PARKING BRAKE
• WARNING:Alwaysusethebrakeevenwhen
standingsllforonlyafewmoments!
10. Apply and release parking brake
Press down the brake pedal to park.
Press it down again to release.
8
9
10
1
2
3
4
7
PHASE 1: BABY
CARRYCOT
• Whenusingxariforchildrenundertheageof6
months,werecommendusingthesuppliedcarrycot
unlthechildcansitunaided.
11. Set up carrycot
Zip open the seat and take out the carrycot.
Push the two aps underneath the carrycot tube.
Place the maress inside the carrycot and aach the
safety bar (see g 25).
12. Adjust carrycot angle
It is easier to t the carrycot onto the chassis if the
aachment brackets are in posion III, poinng straight
downwards. To achieve this pull the angle adjustment
lever and rotate the brackets. The carrycot angle can also
be adjusted when ed to the chassis.
13. Aach carrycot
Posion the carrycot so that the angle adjustment lever
is at the front end of the stroller. Lower the carrycot onto
the chassis unl it clicks in place.
14. Remove carrycot
Press the two buons on both sides of the carrycot and
li it up.
15. Adjust height of carrycot
• Therearetwoheightposionsforthecarrycot.
Press the height adjustment buons on both sides of the
chassis and move the carrycot up or down.
16. Collapse carrycot
Remove the maress and the safety bar. Release the
sideaps from the carrycot frame. Open the seat and
posion the collapsed carrycot inside the seat. Align the
angle adjustment lever with the hole in the rear shell of
the seat. Make sure the seat brackets stay out of the seat.
12 13
14
16
11
15
ENG

98
PHASE 2: TODDLER
SAFETY HARNESS
• Wheneverachildisplacedintheseat,ensurethatthe
safetyharnessiscorrectlyed.
• Theshoulderstrapscanbesetattwodierentheight
posions.Choosetheposionclosesttothetopofthe
child´sshoulders.
17. Set up harness
Take each harness aachment and slide o the
boom part. Push the harness aachment through its
corresponding hole in the seatpad and the seat. Zip
open the seat and slide the boom part onto the harness
aachment from the inside of the seat unl it clicks in
place.
18. Buckle up
Push the shoulder strap buckles into the buckle slot unl
it clicks. Pull the loose ends on the shoulder straps to t
the harness snugly around the child.
19. Buckle down
Push the central buckle buon to release the harness.
SEAT
• Theseatissuitableforchildrenfromtheageof6
monthsandupto17kg.
• Theseatcanbeaachedeitherforwardfacingor
backwardfacing.
20.Aach seat
Lower the seat onto the chassis unl it clicks in place.
21. Remove seat
Press the two seat release buons on both sides of the
seat and li it up.
22. Adjust seat angle
Pull up the lever on the top of the seat, and rotate the
seat into the desired angle.
23. Adjust height of seat
• Therearetwoheightposionsfortheseat.
Press the height adjustment buons on both sides of the
chassis and move the seat up or down.
1
2
3
22 23
17
18 19
21
20
ACCESSORIES
SAFETY BAR
• Alwaysusethesafetybarforthesafetyofyourchild.
24. Remove safety bar covers
Push in the buons and slide the covers o. Keep the
covers in a safe place for future use.
25. Aach safety bar
While pressing the two buons on the outside of the
bumper bar, push it down onto the seat frame, unl it
clicks.
Check if the bumper bar is properly aached by
aempng to pull it out again.
26. Remove safety bar
Press the buons on the outside of the bumper bar, and
pull it up.
27. Adjust safety bar angle
While pressing the two buons on the inner side of the
safety bar, rotate it to the desired angle.
CANOPY
• Thecanopycanbexedtoboththeseataswellasthe
carrycot.
• Whenthecanopybecomeswet,keepitopenandletit
drybeforeclosingit.
28. Aach canopy to seat or carrycot
Push the canopy clips onto the seat frame unl they click
in place.
Fix the velcro ap to the seat.
29. Open/close canopy
Pull the canopy aps to open.
Push down the canopy aps to close.
30. Remove canopy
Release the velcro ap at the top of the canopy
Pull the canopy clips outwards and pull them up to
remove them from the seat frame.
27
25 + 26
28 + 29 + 30
24
ENG

1110
APRON
31. Aach apron to carrycot
Place the apron over the carrycot frame.
Click the snap buons on both sides of the apron onto the
studs of the carrycot frame
32. Adjust apron
The upper apron ap can be placed into two dierent
posions, which are magnezed.
RAIN COVER
• Theraincovercanbexedtoboththeseataswellas
thecarrycot.
• Makesureyouaachthecanopyrst.
33. Aach rain cover to seat or carrycot
Fully open the canopy.
Posion the rain cover over the canopy so the rotaon
lever goes through the hole in the raincover.
Stretch the rain cover over the seat or carrycot and x the
velcro straps around the seat brackets.
OTHER ACCESSORIES
We develop new accessories for xari frequently.
For more details please check www.mimakids.com or
with your supplier.
The following accessories are already available and can be
purchased separately:
• Footmu
• Mosquitonet
• Adapterkit(MaxiCosiCabrio,CybexAton,Bébé
ConfortPebble)
31 32
33
ENG
CARE AND MAINTENANCE
• Tokeepxariinperfectcondionpleasegothroughthe
followingstepsregularly.
• Fabricsandplascsconformtothehighestgradeof
colourfastness.Butexcessiveexposuretothesuncan
causeprematurefadingofplascsandfabrics.
CHASSIS CLEANING
Wash o sand and salt aer vising the beach.
Brush o excessive dirt. Then wipe clean with a moist
cloth and a mild cleaning agent
LUBRICATING MOVING PARTS
Periodicly lubricate the wheels, hinges and other sliding
parts using a light oil or silicon spray. Do not use heavy
oil as this will aract dust and grit which tend to clog and
damage moving parts.
SEAT CLEANING
The rigid seat can be wiped clean with a moist cloth and a
mild cleaning agent. More resistent marks can be rubbed
away using a pencil eraser.
The seat cushion and shoulder pads can be removed (see
g. 17) and must be washed by hand.
Please note the following:
- maximum temperature 30°C / 85°F
- do not bleach
- do not tumble dry
- do not iron
- do not dry clean.
CHECK OTHER PARTS
From me to me check xari for loose screws, worn parts,
torn material and loose stching.
Contact your retailer if parts need to be replaced or repair
the parts as needed.

1312
WARRANTY
REGISTER YOUR PRODUCT ONLINE AT WWW.MIMAKIDS.COM
This will acvate your warranty and will allow us to keep you informed on possible product updates.
Your product complies with current safety requirements and is guaranteed to be free from manufacturing defects in
workmanship and material at me of purchase.
If this product shows material and/or manufacturing defects aer purchase and during the warranty period (with normal
use as described in the user manual), then please contact your retailer.
WARRANTY CONDITIONS
• The warranty period is 24 months from the date of purchase. This warranty period is not extended, even in the event of
repair.
• For the warranty to be valid you need to:
1. have your product registered online at www.mimakids.com
2. provide the original purchase receipt to your retailer
3. provide a descripon of the defect to your retailer.
• The warranty is made to the original owner of the product and is not transferable to any subsequent owner.
• The warranty provides a right to repair and specically not to a product’s exchange or return.
The warranty does not apply in the following circumstances:
• The product has been modied or repaired by third pares.
• Corrosion or rust on the wheels and chassis due to extreme environmental condions, including high humidity, salt spray,
ice or snow or due to insucient maintenance.
• The defect was caused by improper usage or maintenance or due to anything else deemed to be the fault of the user; in
parcular, failure to comply with the instrucons for use as described in the user manual.
• The defect was caused as the result of an accident or airline/ transport damage.
• Normal wear and tear that can be expected with daily use of this product.
• Discoloraon or damage to the fabric due to washing, rainwater, or excessive exposure to sunlight.
• The defect is the result of overloading (exceeding the maximum weight allowance for the child and any items being
carried).
ENG
www.mimakids.com
All right reserved © Mima Europe S.L. 2010