MobileHelp IGP-01 User manual

Mobile Medical Alert Systems
Cellular Classic System |User Guide

MobileHelp Customer Support 1-877-827-6207
2
What’s in the Box
If you selected the optional Fall Button™ Automatic Fall Detect system, you will receive the Fall
Button™ and your choice of wrist button or neck pendant. You will also receive an additional
manual for the Fall Button™ Automatic Fall Detect pendant.
Cellular Base Station Neck Pendant / Wrist Button
+
EMERGENCY
RESET
TEST
Volume:70°F
10:05 AM

MobileHelp Cellular Classic System User Guide 3
If you have any questions during the setup process, please call our support team at
1-877-827-6207 and select the Technical Support option. See last page for hours of
operation.
EMERGENCY
RESET
TEST
MAY 03 FRI70°F
10:05 AM
Figure 1
We thank you for choosing MobileHelp’s Medical Alert System and we welcome you to
the MobileHelp family. Congratulations on making a smart choice!

MobileHelp Customer Support 1-877-827-6207
4
Cellular Base Station Features
Figure 2
EMERGENCY
RESET
TEST
MAY 03 FRI70°F
10:05 AM
Emergency
Button
(Front)
Speaker
Test
Button
Date & Time
ON/OFF
Switch
(Back)
Volume
Signal Strength
Indicator
Temperature
Battery Charge
Indicator
Microphone
Reset Button

MobileHelp Cellular Classic System User Guide 5
Please follow these simple steps to get your system set up and tested.
Connecting your Base Station
Step 1. Select a Location
We recommend you place the Base Station near the center of your home, such as your
living room, family room or kitchen area.
 Place it near an electrical outlet.
 Do not place any object in front of the Base Station.
 Do not place near any appliances that make noise.
Reset Button


MobileHelp Customer Support 1-877-827-6207
6
Step 2. Plug in the Power Cord
Plug the power cord that is attached to the back of the Base Station into an electrical
outlet that is not controlled by a light switch.
Step 3. Turning on your Base Station (Please refer to Figures 3 and 4.)
Turn on your Base Station using the on/off switch located on the back.
 If the Base is set up correctly, the Base Station will say “system ready.”
To avoid accidentally turning off the Base Station, DO
NOT plug it into an electrical outlet that is controlled by
a light switch.
WARNING
To prevent electrical shock please keep the system away from wet
locations.
AVERTISSEMENT
Pour éviter le choc électrique, SVP tenir le système éloigné des endroits
humides.
DANGER
Electric
shock risk

Figure 3

MobileHelp Cellular Classic System User Guide 7
 The emergency and reset buttons will illuminate.
 The display screen will turn on.
 You can use the volume control buttons on the front of the unit under the display
screen if the voice is too loud or too soft.
 Make sure your Base Station is connected to the cellular network by checking for the
signal strength bars on the display screen.
 Within a few minutes of turning on the system, the Cellular Base Station will obtain the
date and time from the cellular network and will appear in the display area. You are not
able to set the date and time manually.
Figure 5
EMERGENCY
RESET
TEST
Volume:70°F
Figure 4
ON/OFF
Switch
OFF ON USB
Model Number: WBS GEN1.0
Serial Number: WB1XPD224Z
FCC ID:PXTWBS-01
IC ID:10876A-WBS01
IMEI Number:355306040196802 MobileHelp
Made in Malaysia
Technical Support Use Only

MobileHelp Customer Support 1-877-827-6207
8
Step 4. User Auto Test
You can use the test button on your Cellular Base Station to make sure your system
is working without placing a call to the emergency response center.
To test your cellular base station:
Press and hold the test button for 3 seconds.
 After the button lights up green, the Base Station will announce “user auto-test.”
 The Base Station will instruct you to “press emergency button or pendant.”
 Once you push a button, it will say “test call sent to emergency response center”
several times.
 Next you will hear an announcement thanking you for testing your device.
 And finally it will say “user auto-test completed.”
 If you did push your button when prompted to do so and the Base Station
announced “user auto-test failed, please contact support” please contact our
technical support department at 1-877-827-6207.
 If you did not push your button when prompted to do so, the Base Station will still
announce “user auto-test failed, please contact support.” However, since you did
not push your button when prompted to do so, there is no reason to contact support.


MobileHelp Cellular Classic System User Guide 9
Step 5. Live Operator Test: Testing Your Help Buttons
 Press the wrist or neck button firmly once.
 The button’s red light turns on indicating a signal was sent to
the Base Station.
 Your Base Station will say “call in progress” several times.
 When the call goes through it will say “Please stand by for
operator.”
 Then an emergency operator will communicate with you
through the Base Station.
 Please state clearly to the operator that “THIS IS A
TEST.” If you do not explain to the operator that you are
testing your unit, emergency help will be dispatched.
 Remember you can also test your help buttons, using the auto test button on your
Base Station.
Note: It is important that you test your system at least once a month. The test
button light on your Base Station will flash green repeatedly within one (1) month
of the last button press letting you know when it is time for you to test your system.
Figure 6

MobileHelp Customer Support 1-877-827-6207
10
Important Safety Information
Wear your help button at all times, especially in the shower and bed.
 Test your system once a month.


During a power outage, the battery backup will last up to 30 hours, after the Base has
been charged for 3 hours.
Keep electrical cords away from heat sources and sharp edges.
 Locate electrical cords away from areas where someone could trip over them.
 Do not use any attachment or accessory that is not intended for use with this system.


Do not block the Base Station’s microphone. This will affect your ability to communicate
with the emergency response center.
Use caution when handling electrical cords.
 Never install electrical cords during a lightning storm.
 The wrist button and/ or neck pendant are designed to work at an approximate range
of 600 feet from the Base Station depending on the size and construction of your
home.
 Do not put the neck pendant or wrist button through the clothes washer or dryer, or
attempt to dry your button out in the microwave or oven.


MobileHelp Cellular Classic System User Guide 11
If you subscribed to the optional medication reminder service and have
scheduled medications, please note:
At the scheduled time for your Medication Reminder, your Cellular Base Station will
announce “Medication Reminder – Please Press Reset to Accept” and the blue reset
button will flash.
The name of the medication will be displayed on the Cellular Base Station screen just
like it was entered in the MobileHelp Connect web portal.
The Base Station will make the announcement once a minute for 30 minutes or
until reset button is pressed.
If you press the “reset” button, the reminder will be recorded as accepted. If you do
not press the "reset" button within 30 minutes, the reminder will be recorded as
ignored.
For complete instructions for Medication Reminders, please log in to
MobileHelp Connect and under the "Help" tab, click on "MobileHelp Connect
User Guide."





 If you have any questions, please contact our customer support department at
1-877-827-6207.

MobileHelp Cellular Classic System User Guide
12
WARNING
Strangulation and choking hazard. The neck pendant button lanyard has been designed to break
away when tugged, however the user can still suffer serious personal injury or death if the cord
becomes entangled or stuck on objects
AVERTISSEMENT
Risque de suffocation ou d’étranglement. La lanière pour bouton pendentif est conçue pour se
détacher lorsqu’elle est tirée, cependant, l’utilisateur peut subir une blessure ou la mort si la
lanière se mêle ou s’accroche à d’autres objets.
Base Station Announcements
Warning Announcement What it Means How to Fix It
"Power not detected"
(Both Red Emergency and
Blue Reset buttons will be
flashing)
Base Station is not
connected to an electrical
outlet or power to the
outlet has been lost
Check that the Base Station
is ON and correctly plugged
into an electrical outlet
"Low Battery"Base Station Battery
Level is very low
Check that the Base Station
is ON and correctly plugged
into an electrical outlet

MobileHelp Customer Support 1-877-827-6207 13
B
ase Station Frequently Asked Questions
How do I call for help?
Press the pendant help button OR press the RED EMERGENCY button on your
Base Station. Your help button will activate the Base Station. The Base Station will say
“call in progress” several times, indicating that the signal from the help button has been
received. The Base Station will send your unique information to the emergency
response center. When this is done, your Base Station will announce “please stand by
for operator.” Then you will hear an operator asking if you are okay. If you are able to
speak, please provide your status.
What happens if I push the button but I can’t speak?
If you are unable to speak or be heard, we will assume it is an emergency and dispatch
help through the closest available public emergency responders and then notify your
personal contacts listed on your profile.
If I accidentally set off the alarm, what do I do?
If you accidentally set off the alarm, let the alarm go through then simply inform the
emergency operator that this is a “false alarm.” The operator will disconnect and
no further action will be taken.

MobileHelp Cellular Classic System User Guide
14
Why is the emergency operator having trouble understanding me?
The microphone in the Base Station is very sensitive, and will pick up surrounding
noises from your television, radio, wind from ceiling fans, and the like. To increase the
quality of the call, look for a quieter area for your Base Station.
Can I replace the neck pendant cord?
Yes, it will work with just about any chain or cord, so feel free to use any one of
your personal chains or necklaces. However the risk of choking may increase if you
do not use the lanyard provided by MobileHelp.
Does the Wrist Button strap contain any latex?
No, the strap MobileHelp uses is silicon based with no latex content.
Can I replace the wrist button band?
Yes, you may replace the wrist button band with a standard watch band of your choice.
Why is my help button not activating my Base Station?
Be sure to press the help button once firmly in the center to activate your Base Station.
A small red light below the pendant or wrist button will flash. If the Base Station does not
respond, check to ensure that the help button is in range of the Base Station. If you still
have issues with your system, call our customer support team at 1-877-827-6207 and
select the technical support option.

MobileHelp Customer Support 1-877-827-6207 15
How far away from the Base Station will my help buttons work?
Your help buttons are designed to work at an approximate range of 600 feet from
the Base Station depending on the size and construction of your home.
Can I speak into my help button?
No, you can communicate with the monitoring center through your Base Station. Your
help buttons do not have a speaker or microphone.
What happens if I push my help button but cannot get to the Base Station?
If you push your help button, stay where you are. An emergency operator will communicate
with you through your Base Station.
What if I move to a different home or apartment?
We can transfer your service to your new location. Just give us a call one week before you
move to determine if cellular coverage will be available at your new location.
What if I spend part of the year in another home?
We can transfer your service to your new location. Just give us a call one week before you
go to determine if cellular coverage will be available at your other home.

MobileHelp Cellular Classic System User Guide
16
Can two people in the same household both use the system?
Yes, two people in the same household can use the system by sharing your help buttons.
You just need to call us and let us know, so we can include the other subscriber’s
information on your personal profile.
What if I moved or my personal information has changed?
Please contact Customer Support at 1-877-827-6207 any time there are any changes to
your personal information, including changes to your address and phone number.
Why is the Base Station test button flashing green?
The test button on your Base Station will flash green repeatedly to alert you that it is time
for you to test your system. When this happens, use the auto test button (see page 8) or
do a live operator test (see page 9). Upon completing your test, the button will stop
flashing.

MobileHelp Customer Support 1-877-827-6207 17
How will an Emergency Response team get into my home?
Rescue personnel follow different procedures. In most cases, emergency personnel
are authorized to break into your home to help you and cannot be responsible for any
damages as a result of gaining entry.
We recommend that you purchase a MobileHelp “lock box” to safely store your house
key. Your lockbox code will be stored on your account and given to emergency personnel
to gain entry to your home without damage. If you have your own lock box (not purchased
from MobileHelp), please call MobileHelp Customer Support at 1-877-827-6207 to
ensure your code is noted on your account.

MobileHelp Cellular Classic System User Guide
18
Refund & Return Policy
Full Refund: 30-day risk-free trial
 Refund period begins the day the unit is received.
 Refund period ends 30 days after receipt of system.
 Customer will get a 100 percent refund if they return the unit and any accessories back
to us within the 30 day period.
 If customer fails to return any of the items listed on their invoice, the retail charge for
these items will be deducted from the refund.
 Refunds are credited back to the customer in the manner originally received, i.e., if
customer paid by credit card, refund will be credited back to the credit card on file; and if
originally paid by check, a MobileHelp® check will be sent to the customer.
 Call MobileHelp at 1-877-827-6207 to request a return label postage slip.
 Make sure your equipment is turned off before shipping to avoid unnecessary
dispatches to your home.

MobileHelp Customer Support 1-877-827-6207 19
Prorated Refund: Refunds outside of the 30-day risk-free trial
 Prorated refunds are calculated based upon the invoice date and the date the
complete system is received by MobileHelp.
 If customer fails to return any of the items listed on their invoice, the retail charge for
these items will be deducted from the refund.
Refunds are credited back to the customer in the manner originally received, i.e., if
customer paid by credit card, refund will be credited back to the credit card on file; and if
originally paid by check, a MobileHelp® check will be sent to the customer.

 Make sure your equipment is turned off before shipping to avoid unnecessary
dispatches to your home.

MobileHelp Cellular Classic System User Guide
20
FDA Statement
MobileHelp is a FDA registered medical device manufacturer. MobileHelp quality system
complies with regulation 21CFR 820 of the FDA Current Good Manufacturing Practice.
The FDA is the official regulatory agency of all food, dietary supplements, medical devices,
cosmetics and veterinary products in the United States.
FCC Statement
Product Base Pendant Watch
FCC ID PXTWBS-01 VDQIGP-01 VDQIGP-02
This device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may
cause undesired operation.
FCC ID PXTCBS2-01 VDQIGP-01 VDQIGP-02