Mocka Alta User manual

Alta Four Drawer
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
1
Wall Strap
x2
washer
Z
Y
wall
anchor
x1
X
safety
strap x1
WV
screw
x1
wall
screw
x1
bolt
x44
A B CDEF G
HJKI
Hardware Supplied
dowel
x6
screw
x40
slide
rail x4
slide
rail x4
handle
x4
slide
rail x4
slide
rail x4
locking
nut x44
screw
x20
x8
wedge
plastic
glide x4
L M
O
screw
x8
handle
screw x8
WARNING: Any furniture that is not anchored to a wall has the potential to tip over in certain
circumstances, i.e. if a child attempts to climb up on the furniture or in the event of an earthquake.
Accordingly, we recommend that all furniture is anchored to a wall. We supply a free safety wall anchor
with all furniture sold and we recommend these are used to prevent your product tipping. The fixing device
provided should fit most wall types, but please note that different wall materials may require different fixing
devices from those supplied.
For quicker assembly, we recommend the
use of a power drill on a low-speed setting.
Phillips & Flathead screwdrivers
and hammer required
Thank you for your purchase. Please follow the instructions for correct assembly.
While we took great effort to ensure these assembly instructions were correct at
the time of printing, sometimes updates are required post production. For the
most up to date versions please refer to the product page on our website.
mocka.com.au/mocka.co.nz

Alta Four Drawer
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
2
1
Insert 4x bolts (C) into panel [1]. Tighten with a screwdriver.
C
C
C
C
1
Panel layout
X4
30
31
32
33
35
34
3
4
5
5
2
7
8
9
6
1

Alta Four Drawer
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
3
23
Attach 4x slide rails (J) into panel [3] and secure with 12x screws (E).
Insert 9x bolts (C) into panels [3]. Tighten with a screwdriver.Attach
4x slide rails (K) to panel [4] and secure with 12x screws (E). Insert
9x bolts (C) into panels [4]. Tighten with a screwdriver.
Insert 2x bolts (C) into panels [6]. Tighten with a screwdriver.Attach panel [6]
to panel [7] secure with 2x locking nuts (D). Tighten with a screwdriver.
C
C
D
D
D
6
6
7
C
C
C
C
C
C
C
C
J
E
CL
E
E
E
E
E
E
E
E
E
J
J
J
J
E
E
E
E
E
E
K
K
K
K
E
E
EE
E
E
E
E
E
E
K
CR
3
4

Alta Four Drawer
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
4
54
Attach panel [2], [6], [7], [8] and [9] to panels [3] with 1x dowels (A)
and secure with 9x locking nuts (D). Tighten with a screwdriver.
Slide panels [5] down along the grooves between the panels [8] and [9]
as shown.
A
D
D
D
D
D
D
D
D
D
3
6 7
8
2
8
5
9
9

Alta Four Drawer
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
5
6 7
Slide panel [5] down along the grooves between the panels [3] and [4]
as shown.
Attach panel [4] to panels [2], [6], [7], [8] and [9] with 1x dowels (A) and
secure with 9x locking nuts (D). Tighten with a screwdriver. Attach 4x
plastic glides (F) to the panels [3] and [4] using a hammer as shown.
4
3
5
4
3
DD
A
DD
D
DD
D
F
F
F
F
F
8
9
2
67

Alta Four Drawer
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
6
8 9 Drawer x4
CC
C
CC
1
3
4
35
Attach panel [1] to panels [3] and [4] with 4x dowels (A) and secure with
4x locking nuts (D). Tighten with a screwdriver.
Insert 5x bolts (C) into panels [35]. Tighten with a screwdriver.
A
A
D
DD
A

Alta Four Drawer
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
7
10 Drawer x4
Assembly Instructions
11 Drawer x4
B
B
B
B
B
30
31
34
32
33
30
31
Attach panels [30], [31] and [32] to panel [34] secure with 5x screws (B).
Tighten with a screwdriver.
Slide panel [33] down along the grooves between the panels [30]
and [31] as shown.

12 Drawer x4
Alta Four Drawer
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
8
13 Drawer x4
Attach slide rails (L) and slide rails (M) to the underside of the side panels
as shown. Secure with 4x screws (E) and tighten with a screwdriver.
DD
DD
D
E
E
L
M
E
E
35
30
31
34
30
31
Attach panel [35] to panels [30], [31] and [34] secure with 5x locking
nuts (D). Tighten with a screwdriver.

Attach 1x handle (O) to panel [35] secure with 2x handle screws (G).
Tighten with a screwdriver.
Insert the assembled drawers into the corresponding compartments
as shown. Ensure the drawers slide easily along the rails.
Alta Four Drawer
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
9
14 Drawer x4 15
G
G
O
35

Alta Four Drawer
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
10
16 17
Attach 8x wedges (H) into the corners of the back of the unit and
secure with 8x screws (I). Tighten with a screwdriver. Attach 1x
safety strap (V) to the top of the back side of the unit as shown
using 1x washer (Z) and 1x screw (W). Tighten with a screwdriver.
Once assembled lift furniture into place, do not drag. Use a drill to
create a small hole lining up with the top of the safety strap (V).
Fasten to the wall using 1x washer (Z) , 1x wall anchor (X) and
1x wall screw (Y). Ensure unit is balanced and steady before
use.You’re done, enjoy!
XV
Y
wall
anchor
screw
strap
washer
H
I
H
I
HI
HI
HI
H
I
H
I
H
I
V
Z
W
V
Z
W
I
H