Mocka Dahlia Four Drawer User manual

Dahlia Four Drawer
Assembly Instructions
Thank you for your purchase.
Please follow the instructions below for correct assembly.
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
1
Wall Strap
x2
washer
Z
Y
wall
anchor
x1
X
safety
strap x1
WV
screw
x1
wall
screw
x1
WARNING: Any furniture that is not anchored to a wall has the potential to tip over in certain
circumstances, i.e. if a child attempts to climb up on the furniture or in the event of an earthquake.
Accordingly, we recommend that all furniture is anchored to a wall. We supply a free safety wall anchor
with all furniture sold and we recommend these are used to prevent your product tipping. The fixing device
provided should fit most wall types, but please note that different wall materials may require different fixing
devices from those supplied.
For quicker assembly, we recommend the
use of a power drill on a low-speed setting.
bolt
x44
ABCDEF
G H J K I
Hardware Supplied
dowel
x12
small
screw x40
slide
rail x4
slide
rail x4
slide
rail x4
slide
rail x4
locking
nut x44
screw
x23
x8
wedge plastic
glide x4
Phillips & Flathead screwdrivers
and hammer required
L
screw
x8

Dahlia Four Drawer
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
2
21
Attach 4x slide rails (F) to panel [2] and secure with 12x small screws (E).
Tighten with a screwdriver. Insert 10x bolts (C) into panel [2]. Tighten
with a screwdriver.
Attach 4x slide rails (G) to panel [3] and secure with 12x small screws (E).
Tighten with a screwdriver. Insert 10x bolts (C) into panel [3]. Tighten
with a screwdriver.
.
2
C
C
C
C
C
C
CC
CC
E
E
E
E
E
E
E
E
E
E
E
E
F
F
F
F
F
E
CL
C
C
CC
C
C
C
C
E
E
E
E
E
E
E
E
E
E
E
E
E
G
G
G
G
G
CR
3
CC

Dahlia Four Drawer
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
3
34
Attach panels [4], [5], [6], [7] and [8] to panel [2] with 4x dowels (A)
and secure with 10x locking nuts (D). Tighten with a screwdriver.
Slide panel [9] down along the grooves between the panels [7] and [8] as shown.
A
A
D
A
A
D
D
D
DD
DD
D
D
D
4
5
5
5
6
8
77
7
8
9
2

Dahlia Four Drawer
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
4
65
Attach panel [3] to panels [4], [5], [6], [7],and [8] with 4x dowels (A)
and secure with 10x locking nuts (D). Tighten with a screwdriver.
Attach 4x plastic glides (K) to the panels [2] and [3] using a hammer
as shown.
Slide panel [9] down along the grooves between the panels [2] and [3] as shown.
3
2
2
3
K
K
D
D
D
D
D
D
DD
K
K
9
4
5
5
5
6
7
8
A
A
A
A
K

3
2
1
1
Dahlia Four Drawer
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
5
78
Insert 4x bolts (C) to panel [1]. Tighten with a screwdriver. Attach panel [1] to the unit with 4x dowels (A) and secure with 4x
locking nuts (D). Tighten with a screwdriver.Attach panel [1] to
panel [4] and secure with 3x screws (B). Tighten with a screwdriver.
C
C
C
C
B
B
B
D
D
DB
A
A
A
4

Dahlia Four Drawer
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
6
9 Drawer x4 10 Drawer x4
Insert 5x bolts (C) to panel [10]. Tighten with a screwdriver. Attach panel [11], [12] and [13] to panel [10] and secure with 5x locking nuts (D).
Tighten with a screwdriver.
C
C
C
C
C
D
D
DD
10
10
11
12
13
D

Dahlia Four Drawer
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
7
11 Drawer x4
Assembly Instructions
Slide panel [14] along the grooves between the panels [11] and [12]. Attach panels [11], [12] and [15] as shown using 5x screws (B).
Tighten with a screwdriver.
12 Drawer x4
14 12
11
11
12
15
B
BB
B
B

13 Drawer x4
Dahlia Four Drawer
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
8
14
Attach slide rail (I) and slide rail (H) to the underside of the side panels
as shown. Secure with 4x small screws (E) and tighten with a screwdriver.
Insert the assembled drawers into the corresponding compartments
as shown. Ensure the drawers slide easily along the rails.
12
E
E
E
E
H
I
11

Dahlia Four Drawer
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
9
15 16
Attach 8x wedges (J) into the corners of the back of the unit and
secure with 8x screws (L). Tighten with a screwdriver. Attach 1x
safety straps (V) to the top of the back side of the unit as shown
using 1x washers (Z) and 1x screws (W). Tighten with a screwdriver.
Once assembled lift furniture into place, do not drag. Use a drill to
create a small hole lining up with the top of the safety strap (V).
Fasten to the wall using 1x washer (Z) , 1x wall anchor (X) and
1x wall screw (Y). Ensure unit is balanced and steady before
use. You're done, enjoy!
J
L
L
J
V
Z
V
Z
W
W
X
Y
Z
wall
anchor
screw
strap
washer