Mocka Asha Coffee Table User manual

Asha Coffee Table
Assembly Instructions
Thank you for your purchase.
Please follow the instructions below for correct assembly.
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
1
bolt
x24
A B C D E
FI JH
G
Hardware Supplied
dowel
x18
screw
x64
locking
nut x24
screw
x2
handle
x4
plastic
glide
x4
bolt
x8
For quicker assembly, we recommend the
use of a power drill on a low-speed setting.
Phillips & Flathead screwdrivers
and hammer required
x8 x8
wheel wheel
WARNING: Any furniture that is not anchored to a wall has the potential to
tip over in certain circumstances, i.e. if a child attempts to climb up on the
furniture or in the event of an earthquake. Accordingly, we recommend that
all furniture is anchored to a wall. We supply a free safety wall anchor with
all furniture sold and we recommend these are used to prevent your product
tipping. The fixing device provided should fit most wall types, but please
note that different wall materials may require different fixing devices from
those supplied.

Asha Coffee Table
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
2
12 x2
Insert 10x bolts (C) into panel [1] and tighten with a screwdriver. Insert 4x bolts (C) into legs [3] and [4] tighten with a screwdriver.
.
1
CC
C
C
C
C
C
C
C
C
C
3
4
C
C
C

Asha Coffee Table
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
3
3x2 4 x2
Insert 3x bolts (C) into panel [2] and tighten with a screwdriver.Attach legs [3] and [4] to panel [2] . with 2x dowels (A) and secure
with 4x locking nuts (D). Tighten with a screwdriver.
A
D
D
A
D
D
C
C
C
2
4
3
D
2

Asha Coffee Table
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
4
65
Attach panel [5] to panel [2] with 2x dowels (A) and secure
with 3x locking nuts (D). Tighten with a screwdriver.
Attach panel [2] to panel [5] with 2x dowels (A) and secure with
3x locking nuts (D). Tighten with a screwdriver.
A
A
D
D
D
A
A
D
D
D
2
5
5
2

Asha Coffee Table
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
5
7 8
Attach panel [6] to panel [5] with 2x dowels (A) and secure with
2x screws (B). Tighten with a screwdriver. Attach 4x plastic
glides (I) to the legs using a hammer as shown.
Attach panel [1] to panels [2] and [6] with 10x dowels (A) and secure
with 10x locking nuts (D). Tighten with a screwdriver.
A
B
B
A
A
A
A
D
D
D
D
2
2
6
A
AA
D
DD
6
5
1
I
I
I
I
I

Asha Coffee Table
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
6
9 Doors x4 10
Assembly Instructions
Attach 8x wheels (F) and (G) to doors [7] as shown, and secure
with 64x screws (E). Tighten with a screwdriver. Attach 4x handles (J)
to doors [7] and secure with 8x bolt (H). Tighten with a screwdriver.
Attach doors [7] as shown, starting with the back door first and then the
front door. Press the clip down on the back of the door to assemble the
door. Push the clip back up to lock into place. Ensure unit is balanced
and steady before use. You’re done, enjoy!
Note: If the door is not sliding smoothly or
sitting straight, there is a screw in the
middle of the wheel on the bottom of each
door that can be tightened/loosened until
the door is sitting properly.
back
OK
F
E
F
E
F
E
F
E
G
E
G
E
G
E
G
E
J
J
H
H
H
H
G
E
7
7
7
7
7