Mocka Marlow Bedside Table User manual

*We recommend using a Flathead screwdriver to tighten all locking nuts 100% before first use.
Please clear any loose wood from the locking nut holes before inserting the nut to ensure it locks 100%.
A B C D E F G H
J
I
Hardware Supplied
dowel
x20
screw
x4
bolt
x14
locking
nut x14
small
screw x30
L+ R slide
rail x6
large
screw x17
nut
x4
long
screw x4
safety
strap x1
L M N
washer
x1
wall
plug x1
wedge
x4
K
r/washer
screw x1
OP
small
screw x4
WARNING: Any furniture that is not anchored to a wall has the
potential to tip over in certain circumstances, i.e. if a child
attempts to climb up on the furniture or in the event of an
earthquake. Accordingly, we recommend that all furniture is
anchored to a wall. We supply a free safety wall anchor with all
furniture sold and we recommend these are used to prevent your
product tipping. The fixing device provided should fit most wall
types, but please note that different wall materials may require
different fixing devices from those supplied.
Phillips & Flathead screwdrivers required 1
mocka.co.nz | mocka.com.au
Assembly Instructions
Thank you for your purchase.
Please follow the instructions below for correct assembly.
For quicker assembly, we recommend the use of a power drill on a low-speed setting.
Marlow Bedside Table

12
Attach 3x slide rails (F) to panel [4] and secure with 9x small screws
(D). Attach 3x slide rails (G) to panel [3] and secure with 9x small
screws (D). Tighten with a screwdriver.
Attach panels [6] to panel [3] and [4] with 4x bolts (A), 4x dowels (C) and
secure with 4x locking nuts (B). Tighten with a screwdriver.
6
4
3
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
F
G
F
F
G
G
4
36
A
B
C
A
C
B
B
B
A
C
A
C
B
2
mocka.co.nz | mocka.com.au
Assembly Instructions
Marlow Bedside Table

34
Attach panel [1] to the rest of the unit with 4x bolts (A) and secure with
4x locking nuts (B). Tighten with a screwdriver.
Slide panel [5] down along the grooves of the side panels. Attach panel
[2] with 4x dowels (C) and secure with 4x large screws (H). Tighten with
a screwdriver.
5
2
1
4
3
B
B
4
3
B
A
A
A
A
H
H
H
H
C
C
C
C
3
mocka.co.nz | mocka.com.au
Assembly Instructions
Marlow Bedside Table

56
Attach the leg panels [12] and [13] together with 4x long screws (I) and
4x nuts (J). Tighten with a screwdriver.
Attach the leg panels to the underside of the unit [2] with 4x screws (E).
Tighten with a screwdriver.
13
12
13
12
2
J
I
I
I
I
J
J
J
E
E
EE
J
Assembly Instructions
4
mocka.co.nz | mocka.com.au
Marlow Bedside Table

78
Insert 2x bolts (A) into panel [7] and [14].Tighten with a screwdriver. Insert 4x dowels (C) into panel [7] and [14]. Attach panel [8] and [10] to front
panel [7] and [14] using 2x locking nuts (B).Tighten with a screwdriver.
Assembly Instructions
5
mocka.co.nz | mocka.com.au
Drawers x3 Drawers x3
A
B
A
B
14
14
8
10
C
C
C
C
7
7
mocka.co.nz | mocka.com.au
Marlow Bedside Table

910
Slide panel [9] along the grooves between the side panels [8]
and [10] to form the base of the drawer.
Attach panels [8], [10] and [11] as shown using 4x screws (H).
Tighten with a screwdriver.
Assembly Instructions
6
mocka.co.nz | mocka.com.au
Drawers x3Drawers x3
H
H
H
H
8
10
11
9
14
7
14
7
8
10
9
mocka.co.nz | mocka.com.au
Marlow Bedside Table

Jolt Wardrobe
ASSEMBLY INSTRUCTIONS
mocka.co.nz | mocka.com.au
11 12
Attach slide rail (G) and slide rail (F) to the underside of the side panels
as shown. Secure with 4x screws (D) and tighten with a screwdriver.
Insert the three completed drawers, ensuring they slide easily along the
rails.
Drawers x3
Assembly Instructions
7
mocka.co.nz | mocka.com.au
mocka.co.nz | mocka.com.au
D
D
D
D
F
8
9
G
14
7
mocka.co.nz | mocka.com.au
Marlow Bedside Table

13 14
Attach 4x wedges (O) to the corners of the back panel [5] as shown,
and secure with 4x small screws (P). Tighten with a screwdriver.
Once assembled lift furniture into place, do not drag. Secure the bottom
of the 1x strap (M) to the cabinet with 1x r/washer screw (K). Attach the
top end of the strap (M) to the wall using 1x wall plug (L), 1x washer (N)
and 1x long screw (H). Tighten with a screwdriver. You’re done, enjoy!
5
O
P
P
O
O
P
P
O
H
L
M
N
Wall Strap
K
7
14
7
Assembly Instructions
8
mocka.co.nz | mocka.com.au
Marlow Bedside Table