Mocka Asha Four Drawer User manual

Asha Four Drawer
Assembly Instructions
Thank you for your purchase.
Please follow the instructions below for correct assembly.
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
1
Wall Strap
x2
washer
Z
Y
wall
anchor
x1
X
safety
strap x1
WV
screw
x1
wall
screw
x1
WARNING: Any furniture that is not anchored to a wall has the potential to tip over in certain
circumstances, i.e. if a child attempts to climb up on the furniture or in the event of an earthquake.
Accordingly, we recommend that all furniture is anchored to a wall. We supply a free safety wall anchor
with all furniture sold and we recommend these are used to prevent your product tipping. The fixing device
provided should fit most wall types, but please note that different wall materials may require different fixing
devices from those supplied.
bolt
x28
A B C D EFGH
J K L M N
IO P
Hardware Supplied
dowel
x26
screw
x40
slide
rail x4
slide
rail x4
slide
rail x4
slide
rail x4
locking
nut x28
screw
x24
screw
x8
x8
wedge small
bolt
x20
handle
x4
plastic
glide
x4
small
locking nut
x20
bolt
x8
For quicker assembly, we recommend the
use of a power drill on a low-speed setting.
Phillips & Flathead screwdrivers
and hammer required

Asha Four Drawer
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
2
12
Insert 6x bolts (C) into panel [1] and tighten with a screwdriver. Insert 12x bolts (C) into legs [4], [5], [6] and [7] and tighten with a
screwdriver.
.
C
C
C
C
C
C
1
4
5
6
7
C
C
C
C
C
C
C
C
C
C
C
C

Asha Four Drawer
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
3
3 4
Attach legs [4] and [5] to panel [2] and attach legs [6] and [7] to
panel [3] with 8x dowels (A) and secure with 12x locking nuts (D).
Tighten with a screwdriver.
Attach 4x slide rail (F) and 4x slide rail (G) to panels [2] and [3] as
shown and secure with 24x screws (E). Tighten with a screwdriver.
F
CL
E
A
A
D
5
6
7
4
A
D
D
D
A
D
D
A
A
D
A
D
D
D
A
D
D
F
E
E
E
F
E
E
E
F
E
E
E
F
E
E
E
E
E
EGE
E
EGE
E
EGE
E
EG
G
CR
E
2
3
2
3
D

Asha Four Drawer
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
4
65
Insert 10x bolts (C) into panels [2] and [3]. Tighten with a screwdriver. Attach panels [8], [9], [10] and [11] to panel [2] with 3x dowels (A) and
secure with 5x locking nuts (D). Tighten with a screwdriver.
CC
C
C
C
AD
AD
A
D
D
CC
C
C
C
2
32
8
9
11
10

Asha Four Drawer
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
5
7 8
Slide panel [12] down along the grooves between the panels [9] and [11]. Attach panel [3] to the unit with 3x dowels (A) and secure with 5x locking
nuts (D). Tighten with a screwdriver.
A
A
A
D
D
D
D
9
11
12
3
8
9
11
10

Asha Four Drawer
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
6
910
Assembly Instructions
Attach 4x plastic glides (L) to the legs using a hammer as shown. Slide panel [12] down along the grooves between the panels [2] and [3].
L
L
L
L
2
3
2
3
12
I

Asha Four Drawer
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
7
12 Drawers x411
Attach panel [1] to the unit with 8x dowels (A) and secure with 6x
locking nuts (D). Tighten with a screwdriver.
M
M
M
M
M
N
N
N
A
13
13
14
15
16
17
14
15
A
A
A
D
A
D
AAD
D
D
1
2
3
Insert 5x small bolts (M) to panel [13].Attach panels [14], [15] and
[16] to front panel [13] with 1x dowel (A) and 5x small locking
nuts (N). Tighten with a screwdriver. Slide panel [17] along the
grooves between the panels [14] and [15] to form the base of
the drawer.

Insert the assembled drawers into the corresponding compartments
as shown. Ensure the drawers slide easily along the rails.
Attach panels [14], [15], [16] and [18] as shown using 6x screws (B).
Tighten with a screwdriver. Attach slide rail (I) and slide rail (H) to the
underside of the side panels as shown. Secure with 4x screws (E) and
tighten with a screwdriver. Attach handle (O) to panels [13] and secure
with 2x bolts (P) and tighten with a screwdriver.
Asha Four Drawer
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
8
1413 Drawers x4
B
B
B
15
E
I
E
E
E
H
PP
O
18
14
15
14
13
13
13
13
13

Once assembled lift furniture into place, do not drag. Use a drill
to create a small hole lining up with the top of the safety strap (V).
Fasten to the wall using 1x washer (Z) , 1x wall anchor (X) and
1x wall screw (Y). Ensure unit is balanced and steady before
use. You're done, enjoy!
Asha Four Drawer
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
9
1615
V
ZW
V
Z
W
X
Y
Z
wall
anchor
screw
strap
washer
1
12
12
Attach 8x wedges (J) into the corners of the back of the unit
and secure with 8x screws (K). Tighten with a screwdriver.
Attach 1x safety straps (V) to the top of the back side of the
unit as shown using 1x washers (Z) and 1x screws (W). Tighten
with a screwdriver.
J
K
J
K