Mocka Eva A-Frame User manual

Eva A-Frame Bookcase
Assembly Instructions
Thank you for your purchase.
Please follow the instructions below for correct assembly.
Hardware Supplied
Z
wall
screw
x1
wall
anchor
x1
washer
x2
safety
strap
x1
cam nut
x18 cam bolts
x18
dowel
x4
scerw
x18
screw
x1
YX
V
AW
Wall Strap
WARNING: Any furniture that is not anchored to a wall has the
potential to tip over in certain circumstances, i.e. if a child attempts to
climb up on the furniture or in the event of an earthquake. Accordingly,
we recommend that all furniture is anchored to a wall. We supply a
free safety wall anchor with all furniture sold and we recommend
these are used to prevent your product tipping. The fixing device
provided should fit most wall types, but please note that different wall
materials may require different fixing devices from those supplied.
mocka.co.nz | mocka.com.au
1
B
C D
Phillips & Flathead screwdrivers required. For quicker assembly,
we recommend the use of a power drill on a low-speed setting.

Eva A-Frame Bookcase
Assembly Instructions
mocka.co.nz | mocka.com.au
2
12
C
C
C
C
C
C
C
C
C
C
10
10
10
10
10
6
7
5
8
9
C
C
C
C
C
C
C
C
10
10
10
10
Attach panel [10] to panel [5] using 2x screws (C). Attach panels [10] to panel [6]
using 4x screws (C). Attach panels [10] to panel [7] using 4x screws (C). Tighten
with a screwdriver.
Attach panels [10] to panel [9] using 4x screws (C). Attach
panels [10] to panel [8] using 4x screws (C). Tighten with a
screwdriver.

Eva A-Frame Bookcase
Assembly Instructions
mocka.co.nz | mocka.com.au
3
34
Insert 2x dowels (D) into panel [5]. Insert 9 cam nuts (A) into panel [10], then
attach panels [3] and [4] using 9x cam bolts (B). Tighten with a screwdriver.
Insert 2x dowels (D) into panel [5]. Insert 9x cam nuts (A) into panel [10], then
attach panels [1] and [2] using 9x cam bolts (B). Tighten with a screwdriver.
A
A
A
A
A
A
A
A
B
B
B
B
3
4
6
9
8
7
5
6
9
8
7
5
A
DD
B
B
B
B
B
A
A
AA
A
A
A
A
A
DD
B
B
B
B
B
BB
B
B
1
2

Eva A-Frame Bookcase
Attach safety strap (V) to the top of the back side of the ladder using
1x washer (Z) and 1x screw (W). Thighten with a screwdriver. Once
assembled lift furniture into place, do not drag.
Move the bookcase into the desired location up against a wall.Use a drill
to create a small hole lining up with the top of the safety strap (V).Fasten
to wall using wall anchor (X), washer (Z) and a wall screw (Y). Ensure
unit is balanced and steady before use.You’re done,enjoy!
Assembly Instructions
mocka.co.nz | mocka.com.au
4
5 6
V
Z
W
V
Z
W
4
1
2
3
X
Y
XY
Z
2
3
4
1
Wall Strap