Mocka Scarborough Six Drawer User manual

Scarborough Six Drawer
Assembly Instructions
Thank you for your purchase.
Please follow the instructions below for correct assembly.
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
1
bolt
x42
leg bracket
x4
bolt
x4
allen
key x1
screw
x8
long
screw x8
plug
x6
cover
x6
screw
x24
ABCD E F G H
J K LM N
IOP
QR
dowel
x20
screw
x78
slide
rail x6
slide
rail x6
slide
rail x6
slide
rail x6
bracket
x6
locking
nut x42
T
felt pad
x4
small bolt
x16
SA1
U
Wall Strap
x4
washer
Z
Y
wall
anchor
x2
X
safety
strap x2
WV
screw
x2
wall
screw
x2
WARNING: Any furniture that is not anchored to a wall has the potential to tip over in certain
circumstances, i.e. if a child attempts to climb up on the furniture or in the event of an earthquake.
Accordingly, we recommend that all furniture is anchored to a wall. We supply a free safety wall anchor
with all furniture sold and we recommend these are used to prevent your product tipping. The fixing device
provided should fit most wall types, but please note that different wall materials may require different fixing
devices from those supplied.
For quicker assembly, we recommend the
use of a power drill on a low-speed setting.
Hardware Supplied
Phillips & Flathead screwdrivers
x8
wedge screw
x8
adjuster
x1

Scarborough Six Drawer
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
2
12
Insert 6x bolts (C) into panel [1] and tighten with a screwdriver. Attach 3x slide rails (F) to panel [3] as shown with 9x screws (E).
Tighten with a screwdriver. Insert 4x bolts (C) into panel [3] and
tighten with a screwdriver.
1
3
C
C
C
C
C
C
C
C
C
C
E
E
E
E
E
E
E
E
E
F
F
F
F
CL
E

Scarborough Six Drawer
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
3
34
Attach 3x slide rails (G) to panel [4] as shown with 9x screws (E).
Tighten with a screwdriver. Insert 4x bolts (C) into panel [4] and
tighten with a screwdriver.
Attach 3x slide rails (G) and 3x slide rails (F) to panel [5] as shown
with 18x screws (E). Tighten with a screwdriver. Insert 4x bolts (C)
into panel [5] and tighten with a screwdriver.
G
CR
E
F
CL
E
G
CR
E
4
5
5
FLIP
E
E
E
E
E
EE
E
E
G
G
G
G
F
F
F
CC
C
C
E
E
E
E
EE
E
E
E
EE
E
EE
E
E
E
E
C
C
C
C

Scarborough Six Drawer
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
4
56
Attach 6x brackets (J) to panels [2] and [6] secure with 12x screws (E).
Tighten with a screwdriver. Place 6x covers (K) over the brackets
(J) as shown.
Attach panels [4] and [5] to panels [6] with 4x dowels (A) and secure
with 4x locking nuts (D). Tighten with a screwdriver.
2
6
4
5
6
6
EE
J
EE
x4
J
EE
J
EE
K
JJ
The round head is aligned
with the direction of the arrow
A
D
D
D
D
A
A
A

Scarborough Six Drawer
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
5
78
Attach panel [7] to panel [4] secure with 2x locking nuts (D).
Tighten with a screwdriver.
4
7
7
5
DD
BB
B
B
Attach panel [7] to panel [5] secure with 2x long screws (B). Tighten
with a screwdriver.

Scarborough Six Drawer
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
6
910
Attach panels [6] to panel [5] with 2x dowels (A) and secure
with 2x locking nuts (D). Tighten with a screwdriver.
Attach panel [3] to panels [6] and [7] with 2x dowels (A) and
secure with 4x locking nuts (D). Tighten with a screwdriver.
3
7
6
6
DD
A
D
D
A
5
6
6
D
D
A
A

Scarborough Six Drawer
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
7
11 12
Slide panel [8] down along the grooves between
panels [3] and [4] as shown.
Attach panel [1] to panels [3], [4] and [5] with 6x dowels (A) and secure
with 6x locking nuts (D). Tighten with a screwdriver.
3
3
5
1
4
4
8
A
D
A
A
A
D
D
D

Scarborough Six Drawer
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
8
13 14
Slide panel [8] down along the grooves between
panels [3] and [4] as shown.
Attach panel [2] to panels [3], [4] and [5] with 6x dowels (A) and
secure with 6x long screws (B). Tighten with a screwdriver.
3
3
5
44
2
8
A
B
B
A
B
A
B
B
A
B

Scarborough Six Drawer
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
9
15 16 Drawer x 6
Attach a leg bracket (P) to each leg [9] using 2x screws (R) and
1x bolt (Q). Tighten with a screwdriver and Allen key (O). Attach
each leg [9] to panel [2] using 4x small bolts (S) as shown. Tighten
with the Allen key (O). Attach 4x felt pads (T) to the ends of the legs.
Attach 1x support leg [10] to panel [2] as shown. screw the height
adjusters (N) onto the support leg [10].
Insert 24x bolts (C) into panels [11] and [12]. Attach 6x plugs (L) to
panel [11] and [12] and secure with 6x screws (E). Tighten with a screwdriver.
2
9
9
9
9
11
12
9
front
back
O
T
Q
R
P
R
O
front
x4
C
C
C
C
E
L
10
S
N
T
T
S
S
SS
T
T

Scarborough Six Drawer
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
10
17 Drawer x 6 18 Drawer x 6
Attach panels [13], [14] and [15] as shown using 24x screws (M).
Tighten with a screwdriver.
Slide panels [16] down along the grooves between panels [13]
and [14].
15
13
13
14
14 16
M
M
M
M

Scarborough Six Drawer
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
11
19 Drawer x 6 20 Drawer x 6
Attach panels [11] and [12] to panels [13] and [14] using
24x locking nuts (D). Tighten with a screwdriver.
Attach slide rails (H) and slide rails (I) to the underside of the side panels
as shown. Secure with 24x screws (E) and tighten with a screwdriver.
13
14
H
E
E
E
I
E
11
12
11
12
D
D
DD
13
14

Scarborough Six Drawer
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
12
21 22
Insert the drawers into the unit as shown. If the door is not catching or
sitting flush, twist the end of the cover (K) until it catches on the plug (L).
Attach 8x wedges (U) to the back of the unit as shown, and secure
with 8x screws (A1). Now attach 2x safety straps (V) to the back edge
of panel [1] using 2x washers (Z) and 2x screws (W). Tighten with a
screwdriver.
11
11
11
12
12
12
8
1
8
V
Z
W
A1
A1
U
V
Z
W
V
Z
W
U
K

Scarborough Six Drawer
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
13
23 24
Once assembled lift furniture into place, do not drag. Use a drill to
create a small hole lining up with the top of the safety strap (V).
Fasten to the wall using 2x washers (Z), 2x wall anchors (X) and
2x wall screws (Y). Ensure unit is balanced and steady before use.
You’re done, enjoy!
X
Y
Z
X
Y
Z
wall
anchor
screw
strap
washer