Mocka Jesse Change Table User manual

Jesse Change Table
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
1
x30 x 30
ABC
Hardware Supplied
bolt
xx 12
bolt
12
nut
F
nult
x 12
sticker
D
x1
E
Allen Key plastic
glide x4
G
WARNING: Any furniture that is not anchored to a wall has the potential to tip over in certain
circumstances, i.e. if a child attempts to climb up on the furniture or in the event of an earthquake.
Accordingly, we recommend that all furniture is anchored to a wall. We supply a free safety wall anchor
with all furniture sold and we recommend these are used to prevent your product tipping. The fixing device
provided should fit most wall types, but please note that different wall materials may require different fixing
devices from those supplied.
For quicker assembly, we recommend the
use of a power drill on a low-speed setting.
Phillips & Flathead screwdrivers
and hammer required
Thank you for your purchase. Please follow the instructions for correct assembly.
While we took great effort to ensure these assembly instructions were correct at
the time of printing, sometimes updates are required post production. For the
most up to date versions please refer to the product page on our website.
mocka.com.au/mocka.co.nz
Wall Strap
x2
washer
Z
Y
wall
anchor
x1
X
safety
strap x1
WV
screw
x1
wall
screw
x1

Jesse Change Table
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
2
1
.
C
C
C
C
C
C
5
5
4
2
3
x4
Insert 9x bolts (C) into panel [2], [3] and panel [4]. Tighten with a screwdriver.
Panel layout
4
2
4
1
1
1
4
4
3
C
C
C

Jesse Change Table
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
3
2 x2
3
C
C
C
C
C
C
D
D
D
D
D
D
D
D
D
D
D
D
5
1
1
4
4
3
2
x2
D
Insert 6x bolts (C) into panel [5]. Tighten with a screwdriver. Attach panels [4] to panel [1] secure with 6x locking nuts (D). Tighten with a
screwdriver.Attach panels [2] and [3] to panel [1] secure with 6x locking nuts (D).
Tighten with a screwdriver.

Jesse Change Table
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
4
54
A
B
B
B
B
A
A
A
A
A
D
D
D
D
D
D
D
D
D
F
F
F
F
D
A
A
A
A
B
B
B
B
B
B
5
5
5
5
1
1
1
4
4
2
AE
B
Attach panels [5] to panels [1] secure with 12x locking nuts (D). Tighten
with a screwdriver. Attach 4x plastic glides (F) to the panels [5] using a
hammer as shown.
Insert 12x nuts (B) into panels [2], [3] and panel [4]. Attach panels [5] to panels
[2], [3] and panel [4] secure with 12x bolts (A).Tighten with an allen key (E).
×
F
3

7
Jesse Change Table
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
5
6
G
G
G
G
G
G
G
G
G
G
5
5
V
Z
W
V
Y
X
wall
anchor
screw
strap
washer
Attach 12x sticker (G) to panels [5]. Attach 1x safety strap (V) to the
top of the back side of the unit as shown using 1x washer (Z) and 1x
screw (W). Tighten with a screwdriver.
Once assembled lift furniture into place, do not drag. Use a drill to create a small
hole lining up with the top of the safety strap (V). Fasten to the wall using 1x washer
(Z) , 1x wall anchor (X) and 1x wall screw (Y). Ensure unit is balanced and
steady before use.You’re done, enjoy!