Mocka Eros Entertainment Unit User manual

mocka.co.nz I mocka.com.au
ASSEMBLY INSTRUCTIONS
Eros Entertainment Unit
Thank you for your purchase.
Please follow the instructions below for correct assembly.
A
18 x
bolt
B
18 x
locking nut
C
36 x
dowel
W
1x
safety
strap
HARDWARE SUPPLIED
D
8 x
long screw
E
48 x
small screw
40 mm
10 mm
F
6x
G
6x
H
11 x
long screw
I
8 x
wedge
45 mm
1x
long
screw
XY
Z
1x
wall
anchor
1x
screw
1x
washer
Shelf
plug
Sliding
track glide
WARNING: Any furniture that is not anchored to a wall has the potential to
tip over in certain circumstances, i.e. if a child attempts to climb up on the
furniture or in the event of an earthpuake. Accordingly, we recommend that
all furniture is anchored to a wall. We supply a free safety wall anchor with
all furniture sold and we recommend these are used to prevent your product
tipping. The fixing device provided should fit most wall types, but please note
that dierent wall materials may require dierent fixing devices from those
supplied.
*We recommend using a Flathead screwdriver to tighten all locking nuts 100% before first use.
Phillips & Flathead screwdrivers and hammer required

mocka.co.nz I mocka.com.au
ASSEMBLY INSTRUCTIONS
Eros Entertainment Unit
1 2
Insert 8 x bolts (A) into panel [1]. Attach 1 x wall strap (W) to panel [1] using 1 x
using 1 x screw (Y). Tighten with a srewdriver.
A
1
A
A
A
A
A
A
A
A
Y
W
Attach 4 x bolts (A) into panels [3] and [4]. Slide panel [6] between the
grooves on panels [5] as shown.
6
5
5
43
A
A
A
A

mocka.co.nz I mocka.com.au
ASSEMBLY INSTRUCTIONS
Eros Entertainment Unit
3 4
6
5
5
4
B
B
C
C
B
4
5
56
3
B
B
C
C
Insert 2 x dowels (C) to panel [6] and attach panel [4]. Attach 2 x locking
nuts (B) into panel [6]. Tighten with a screwdriver.
Insert 2 x dowels (C) to panel [6] and attach panel [3]. Attach 2 x locking
nuts (B) into panel [6]. Tighten with a screwdriver.
B

mocka.co.nz I mocka.com.au
ASSEMBLY INSTRUCTIONS
Eros Entertainment Unit
5 6
C
C
B
B
B
C
C
B
1
4
5
5
3
B
B
C
C
B
B
C
C
Insert 8 x dowels (C) to panels [3], [4] and [5] and attach panels [1]. Attach 8 x
locking nuts (B) into panels [3], [4] and [5]. Tighten with a screwdriver.
B
4
7
5
5
3
Slide panels [7] between the grooves on panels [3] and [4] to form the
back of the unit as shown.

mocka.co.nz I mocka.com.au
ASSEMBLY INSTRUCTIONS
Eros Entertainment Unit
7 8
2
4
5
5
3
C
C
C
C
C
C
C
C
D
D
D
D
D
D
D
D
Insert 8 x dowels (C) into panels [2], [3], [4] and [5]. Attach panel [2] to panels
[3], [4] and [5], securing with 8 x long screws (D).
Panel piece x 2
8
A
A
A
A
Attach 6 x bolts (A) into panels [8]. Tighten with a screwdriver.

mocka.co.nz I mocka.com.au
ASSEMBLY INSTRUCTIONS
Eros Entertainment Unit
9 10
8
Insert 12 x dowels (C) to panels [9] and attach panels [8]. Insert 6 x
locking nuts (B) into panels [9]. Tighten with a screwdriver.
8
9
9
9
B
B
C
C
C
C
C
C
C
C
B
B
B
B
C
C
C
C
B
Insert 4 x dowels (C) into panels [8] and [9]. Attach panels [8] and 9] to
panel [2] and secure with 11 x long screws (H). Tighten with a screwdriver.
CC
CC
9
8
H
H
H
H
H
H
H
H
H
H
H
2
4

mocka.co.nz I mocka.com.au
ASSEMBLY INSTRUCTIONS
Eros Entertainment Unit
11 12
Panel x 3
Attach 6 x shelf plugs (F) to panels [10] and secure with 24 x small screws (E).
Attach 6 x sliding track glides (G) to panels [10] and secure with 24 x small screws (E).
10
E
G
G
E
G
F
F
E
E
E
E
F
Push 6 xShelf plug (F) down. Place 6 x Sliding track guide (G) into panel 2
Railing. Push 6 x Shelf plug (F) up into Panel [1] Railing to secure into place.
10
10
10
1
3

mocka.co.nz I mocka.com.au
ASSEMBLY INSTRUCTIONS
Eros Entertainment Unit
13 14
Attach 8 xwedges (I) to panel [7]. Tighten with a screwdriver.
Once assembled lift furniture into place, do not drag. Use a drill to create a
small hole lining up with the top of the safety stap (W). Fasten to wall using
wall anchor (X), washer (Z) and screw. Ensure the unit is balaced and steady
before use. You’re done, enjoy!
I
I
I
I
I
I
I
I
I
7
Strap
Washer
Wall
anchor
Wall
screw
X
Z
Wall
screw
4