Mocka Sintra Bedside Table User manual

Sintra Bedside Table
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
1
Wall Strap
x2
washer
Z
Y
wall
anchor
x1
X
safety
strap x1
WV
screw
x1
wall
screw
x1
bolt
x14
x4
A B C D EFGH
JKLMN
I
O P Q
Hardware Supplied
dowel
x10
screw
x26
slide
rail x2
slide
rail x2
slide
rail x2
slide
rail x2
locking
nut x14
screw
x12
x4
wedge screw
bolt
x16
long
bolt x8
x2
bracket
x4
bracket
x1
Allen
key
cover
x2
seal
x2
plastic
glide
x4
R S
WARNING: Any furniture that is not anchored to a wall has the potential to tip over in certain
circumstances, i.e. if a child attempts to climb up on the furniture or in the event of an earthquake.
Accordingly, we recommend that all furniture is anchored to a wall. We supply a free safety wall anchor
with all furniture sold and we recommend these are used to prevent your product tipping. The fixing device
provided should fit most wall types, but please note that different wall materials may require different fixing
devices from those supplied.
For quicker assembly, we recommend the
use of a power drill on a low-speed setting.
Phillips & Flathead screwdrivers
and hammer required
Thank you for your purchase. Please follow the instructions for correct assembly.
While we took great effort to ensure these assembly instructions were correct at
the time of printing, sometimes updates are required post production. For the
most up to date versions please refer to the product page on our website.
mocka.com.au/mocka.co.nz

Sintra Bedside Table
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
2
Panel layout
Insert 4x bolts (C) into panel [1] and tighten with a screwdriver.
C
1
C
C
C
1
1
3
5
6
2
40
30
31
32
33
35
4
x4
x2

Sintra Bedside Table
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
3
2 3
Attach 2x slide rail (P) and 2x slide rail (Q) to panels [3] and
[4] as shown and secure with 12x screws (E). Tighten with
a screwdriver. Insert 2x bolts (C) into panels [3] and [4].
Tighten with a screwdriver.
Attach 1x bracket (M) to panel [6] and secure with 2x screws (E).
Tighten with a screwdriver. Place 1x cover (N) over the bracket (M)
as shown.
Q
CR
E
P
CL
E
4
3
EE
6
EE
N
MM
The round head
is aligned with the
direction of the arrow.
M
E
E
E
Q
Q
E
E
E
E
E
E
P
P
E
E
E
C
C

Sintra Bedside Table
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
4
54
Attach panel [3] and panel [4] to panel [1] with 4x dowels (A) and
secure with 4x locking nuts (D). Tighten with a screwdriver.
Attach panel [3] and panel [4] to panel [6] with 2x dowels (A) and
secure with 2x locking nuts (D). Tighten with a screwdriver.
A
A
D
D
D
A
A
A
D
D
D
3
3
4
6
1
4

Sintra Bedside Table
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
5
6 7
Slide panel [5] down along the grooves between the panels [3]
and [4] to form the back of the unit as shown.
Attach 1x bracket (M) to panel [2] and secure with 2x screws (E).
Tighten with a screwdriver. Place 1x cover (N) over the bracket (M)
as shown.
EE
EE
N
MM
The round head
is aligned with the
direction of the arrow.
M
2
5
3
4

Sintra Bedside Table
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
6
89
Attach panel [2] to the unit with 4x dowels (A) and secure with 4x
screws (B). Tighten with a screwdriver.
Assembly Instructions
Attach 4x leg brackets (F) to legs [40] using 8x long bolts (H). Tighten
with an Allen key (I). Attach legs [40] to panel [2] using 16x bolt (G)
as shown. Tighten with an Allen key (I). Attach 4x plastic glide (L)
to the ends of the legs using a hammer as shown.
2
2
3
4
40
40
40
40
40
40
A
A
A
B
B
B
B
B
front
back
F
F
L
L
L
L
H
F
F
F
F
F
I
I
L
G
GGG
G
GGG
GGG
G
G
GG

Insert 4x bolts (C) into panel [35]. Attach 1x seal (O) to panel [35]
and secure with 1x screw (E). Tighten with a screwdriver.
Sintra Bedside Table
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
7
11 Drawers x210 Drawers x2
C
C
C
C
E
O
35
B
B
B
B
30
31
32
Attach panels [30] and [31] to panel [32] secure with 4x screws (B).
Tighten with a screwdriver.

Sintra Bedside Table
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
8
13 Drawers x212 Drawers x2
Slide panel [33] down along the grooves between the side
panels [30] and [31].
DD
D
D
30
30
31
33
31
35
Attach panel [35] to panels [30] and [31] secure with 4x locking nuts (D).
Tighten with a screwdriver.

Sintra Bedside Table
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
9
1514 Drawers x2
Insert the assembled drawers into the corresponding compartments
as shown. Ensure the drawers slide easily along the rails. If the door
is not catching or sitting flush, twist the end of the cover (N) until it
catches on the seal (O).
.
Attach slide rail (R) and slide rail (S) to the underside of the side panels
as shown. Secure with 4x screws (E) and tighten with a screwdriver.
R
30
31
N
E
E
E
E
S

Sintra Bedside Table
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
10
1716
Once assembled lift furniture into place, do not drag. Use a drill to create a
small hole lining up with the top of the safety strap (V). Fasten to the wall
using 1x washer (Z), 1x wall anchor (X) and 1x screw (Y). Ensure unit is
balanced and steady before use.You’re done, enjoy!
Attach 4x wedges (J) into the corners of the back of the unit and
secure with 4x screws (K). Tighten with a screwdriver. Attach 1x
safety straps (V) to the top of the back side of the unit as shown
using 1x washer (Z) and 1x screws (W). Tighten with a screwdriver.
V
Z
W
V
Z
W
K
K
K
K
K
J
J
J
J
J
X
Y
Z
wall
anchor
screw
strap
washer