Mocka Georgia Two Drawer Bedside User manual

1
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558
Georgia Two Drawer Bedside
Assembly Instructions
Thank you for your purchase.
Please follow the instructions below for correct assembly.
A
Hardware Supplied
bolt
x12
FK
plate
x4
L
screw
x16
G
left rail
x2
H
right rail
x2
I
screw
x2
handle
x2
B
locking nuts
x12
C
dowel
x4
D
small screw
x20
E
medium screw
x13
Phillips & Flathead screwdrivers required.
For quicker assembly, we recommend the
use of a power drill on a low-speed setting.
P
wall strap
x1
Q
washer
x2
J
wall plug
x1
NRS
x8
bolt
x1
allen key
0.14 screw
x1
WARNING: Any furniture that is not anchored to a wall has the
potential to tip over in certain circumstances, ie. if a child attempts
to climb on the furniture or in the event of an earthquake.
Accordingly, we recommend that all furniture is anchored to a wall.
We supply a free safety wall anchor with all furniture sold and we
recommend these are used to prevent your product tipping. The
fixing device provided should fit most wall types, but please note
that different wall materials may require different fixing devices
from those supplied.

12
2
Georgia Two Drawer Bedside
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558
Attach 4 x bolts (A) to panel [1]. Tighten with a screwdriver. Attach 2 x left rails (G) and 2 x right rails (H) to panels [3] and [4] and
secure with 12 x screws (D). Tighten with a screwdriver.
A
A
A
A
A
1
D
D
D
D
D
D
D
D
D
D
D
D
G
G
H
H
D
D
D
G
D
D
D
H
D
3
4

3
3
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558
Attach panels [3] and [4] to panel [1] and secure with 4 x locking nuts
(B). Tighten with a screwdriver.
Slide panel [5] into position as shown.
Georgia Two Drawer Bedside
Assembly Instructions
4
B
B
B
B
B
1
3
4
1
3
4
5

5
4
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558
Attach panel [2] to panels [3], [4] and [5] and secure with 4 x dowels
(C) and 4 x screws (E). Tighten with a screwdriver.
Attach 1 x plate (K) to panel [6] as shown and secure with 2 x screws
(R). Attach panel [6] to panel [2] and secure with 16 x screws (L).
Tighten with a screwdriver.
Georgia Two Drawer Bedside
Assembly Instructions
6 x4
4
5
2
2
E
E
E
E
E
6
K
R
R
S

7x2
5
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558
Attach 1 x left rail (G) and 1 x right rail (H) to panels [8] and [9] and
secure with 4 x screws (D). Attach 4 x bolts (A) ato panel [7].
Tighten with a screwdriver.
Attach panel [8] and [9] to panel [10] and secure with 4 x screws (E).
Tighten with a screwdriver.
Georgia Two Drawer Bedside
Assembly Instructions
8x2
7
8
9
8
9
10
E
E
E
E
I
J

9x2
6
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558
Slide panel [11] into position as shown. Attach 1 x handle [J] to panel [7] and secure with 2 x screws [I].
Attach panel [7] to assembled frame and secure with 4 x locking
nuts (B). Tighten with a screwdriver.
Georgia Two Drawer Bedside
Assembly Instructions
10 x2
11
8
9
1
8
9
11
B
B
B
B
11
7

11
7
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558
Slide assembled drawers into position as shown.
Georgia Two Drawer Bedside
Assembly Instructions
12
7
N
Q
P
QN
P
Attach 1 x wall straps [P] to unit with 1 x screws [N] and 1 x washers [Q].
7

13
7
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558
Georgia Two Drawer Bedside
Assembly Instructions
Once assembled lift furniture into place, do not drag. Attach 1 x wall
straps (P) to unit with 1 x screws (N) and 1 x washers (Q). Use a drill to
create a small hole lining up with the wall strap (P). Fasten to wall using
1 x wall anchor (F), 1 x wall screw (E) and 1 x washers (Q). Tighten
with a screwdriver. Ensure unit is balanced and steady before use.
You’re done, enjoy!
E
E
Q
Q
F
F
P
P