Mocka Sonata Bed User manual

A
Socket Screw
20mm x8
B C
Socket Screw
12mm x4
Socket Screw
30mm x4
E
Nut 6mm
x8
F
Cap
x24
Z
Y
Allen key 4mm
x1
Allen key 5mm
x1
X
Wrench 6mm
x1
Hardware Supplied
*ECITONTNATROPMI*
people. DO NOT drag, push or pull the bed across the
D
Socket Screw
52mm x4
Sonata Bed - Single
1
mocka.co.nz | mocka.com.au
Assembly Instructions
Thank you for your purchase.
Please follow the instructions below for correct assembly.

12
Assemble each side by attaching the support leg to its two corresponding side
panels with 2x 52mm socket screws (D) and 2x 6mm nuts (E). Tighten with
the 4mm allen key (Z) and wrench (X).
Attach both sides of the bed to the centre bar with 4x 12mm socket screws (A)
and tighten with the 4mm allen key (Z).
E
Z
X
D
A
Z
E
DD
E
D
E
A
A
Sonata Bed - Single
2
mocka.co.nz | mocka.com.au
Assembly Instructions

12
Assemble each side by attaching the support leg to its two corresponding side
panels with 2x 50mm socket screws (D) and 2x 6mm nuts (E). Tighten with
the 4mm allen key (Z) and wrench (X).
Attach both sides of the bed to the centre bar with 4x 12mm socket screws (A)
and tighten with the 4mm allen key (Z).
E
Z
X
D
A
Z
E
DD
E
D
E
A
A
34
Fix the outer support bars to the bed frame using the 4x 30mm socket
screws (C) and 4x Nuts (E) with the 4mm Allen Key (Z) and wrench (X).
X
Z
E
C
Attach the bed-ends using the 20mm socket screws (B) with the 5mm
allen key (Y).
B
Y
Sonata Bed - Single
3
mocka.co.nz | mocka.com.au
Assembly Instructions

56
Lift the furniture into the desired location, do not drag. You’re done,
enjoy!
Insert caps (F) onto the ends of 12x bed planks, then using the cap ends
insert the planks into bed frame.
F
Sonata Bed - Single
Assembly Instructions
4
mocka.co.nz | mocka.com.au