Mocka Hugo Bedside Table User manual

Hugo Bedside Table
Assembly Instructions
Thank you for your purchase.
Please follow the instructions below for correct assembly.
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
1
Wall Strap
x2
washer
Z
Y
wall
anchor
x1
X
safety
strap x1
WV
screw
x1
wall
screw
x1
WARNING: Any furniture that is not anchored to a wall has the potential to tip over in certain
circumstances, i.e. if a child attempts to climb up on the furniture or in the event of an earthquake.
Accordingly, we recommend that all furniture is anchored to a wall. We supply a free safety wall anchor
with all furniture sold and we recommend these are used to prevent your product tipping. The fixing device
provided should fit most wall types, but please note that different wall materials may require different fixing
devices from those supplied.
For quicker assembly, we recommend the
use of a power drill on a low-speed setting.
bolt
x4
x4
A B C D E F G H
JKLMN
I
O
Hardware Supplied
P
dowel
x8
screw
x13
slide
rail x1
slide
rail x1
slide
rail x1
slide
rail x1
locking
nut x4
screw
x4
x4 bolt
x4
locking
nut x4
small small
QR
wedge screw screw
x4
x1
bracket
cover
x1 x4
bolt seal
x1
S
key x1
Allen
Phillips & Flathead screwdrivers required

Hugo Bedside Table
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
2
12
Insert 4x bolts (C) into panel [1] and tighten with a screwdriver. Attach 1x slide rail (F) and 1x slide rail (G) to panels [3] and [4]
as shown with 6x screws (E). Tighten with a screwdriver.
.
G
CR
E
F
CL
E
E
E
E
C
C
C
C
1
3
4
E
E
EG
F

Hugo Bedside Table
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
3
3 4
Attach panel [4] and panel [3] to panel [1] with 4x dowels (A) and
secure with 4x locking nuts (D). Tighten with a screwdriver.
Slide panel [5] down along the grooves between the panels [4] and [3],to
form the back of the unit as shown.
A
A
A
A
D
D
D
D
3
4
5
1
3
4

Hugo Bedside Table
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
4
65
Attach 1x bracket (M) to panel [2] and secure with 2x screws (E). Tighten
with a screwdriver. Place 1x cover (N) over the bracket (M) as shown.
Attach panel [2] to the unit with 4x dowels (A) and secure with 4x screws (B).
Tighten with a screwdriver.
N
M
E
E
2
EE
A
A
A
B
B
B
B
2
3
4

Hugo Bedside Table
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
5
7 8
Attach panels [6] to the panel [2] with 4x bolts (Q).
Tighten with an Allen key (L).
Insert 4x small bolts (O) into panel [7] and attach 1x seal (S) using 1x screw (E)
to panel [7]. Attach panels [8] and [9] to panel [7] and secure with 4x small
locking nuts (P). Tighten with a screwdriver. Slide panel [10] along the
grooves between the panels [8] and [9] to form the base of the drawer.
O
O
OO
PP
P
P
E
S
Q
7
8
9
7
10
Q
L
Q
L
6
6
2
8
9

Hugo Bedside Table
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
6
910
Assembly Instructions
Attach panel [11] as shown using 4x screws (R). Tighten with a
screwdriver. Attach slide rail (I) and slide rail (H) to the underside
of the side panels as shown. Secure with 4x screws (E) and tighten
with a screwdriver.
Insert the assembled drawers into the corresponding compartments
as shown. Ensure the drawers slide easily along the rails. If the door
is not catching or sitting flush, twist the end of the cover (N) until it
catches on the seal (S).
E
E
E
E
R
R
RR
H
I
11
8
9
8
N
9
7

Hugo Bedside Table
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
7
1211
Attach 4x wedges (J) into the corners of the back of the unit and secure
with 4x screws (K). Tighten with a screwdriver. Attach 1x safety straps (V)
to the top of the back side of the unit as shown using 1x washers (Z) and
1x screws (W). Tighten with a screwdriver.
Once assembled lift furniture into place, do not drag. Use a drill to
create a small hole lining up with the top of the safety strap (V).
Fasten to the wall using 1x washer (Z), 1x wall anchor (X) and
1x wall screw (Y). Ensure unit is balanced and steady before use.
You’re done, enjoy!
X
Y
Z
1
V
Z
W
5
1
V
Z
W
J
K
wall
anchor
screw
strap
washer