Mocka Eclipse Entertainment Unit User manual

Eclipse Entertainment Unit
Assembly Instructions
Thank you for your purchase.
Please follow the instructions below for correct assembly.
1
Wall Strap
x2
washer
Z
Y
wall
anchor
x1
X
safety
strap x1
WV
screw
x1
wall
screw
x1
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
WARNING: Any furniture that is not anchored to a wall has the potential to tip over in certain
circumstances, i.e. if a child attempts to climb up on the furniture or in the event of an earthquake.
Accordingly, we recommend that all furniture is anchored to a wall. We supply a free safety wall anchor
with all furniture sold and we recommend these are used to prevent your product tipping. The fixing device
provided should fit most wall types, but please note that different wall materials may require different fixing
devices from those supplied.
For quicker assembly, we recommend the
use of a power drill on a low-speed setting.
x8
A B C D EFGH
J K L M N I O P
Hardware Supplied
big
dowel
x16
dowel
x4
screw
x6
bolt
x10
screw
x10
screw
x24
locking
nut x 10
wedge
x8
bolt
x10
screw Allen
Key
x1
Phillips & Flathead screwdrivers
hinge
x4
screw
x2
height
adjuster
x2
handle
x2
handle
screw
x4

Eclipse Entertainment Unit
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
2
12
Insert 6x bolts (C) into panel [1] and tighten with a screwdriver. Insert 4x bolts (C) into panels [4] and [5]. Tighten with a screwdriver.
1
4
5
C
C
C
C
C
C
C
C
C
C

Eclipse Entertainment Unit
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
3
3 4
Attach panels [3], [4], [5] and [6] to panel [1] with 6x big dowels (A) and
2x dowels (P) and secure with 6x locking nuts (D). Tighten with a screwdriver.
Attach panels [4] and [5] to panel [7] with 4x big dowels (A) and
secure with 4x locking nuts (D). Tighten with a screwdriver.
1
4
4
5
5
6
3
7
A
D
D
D
D
A
A
A
A
A
A
P
P
A
A
D
D
D
D

Eclipse Entertainment Unit
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
4
65
Slide panels [8] and [9] down along the grooves between
panels [3], [4] and [5] to form the back of the unit as shown.
Attach panel [2] to panels [3], [4], [5] and [6] with 6x big dowels (A) and
2x dowels (P) and secure with 6x screws (B). Tighten with a screwdriver.
4
4
8
9
55
6
6
2
33
B
A
B
A
B
B
A
P
B
B
A

Eclipse Entertainment Unit
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
5
7x2 8
Attach panel [11] to panel [10].
Attach panels [10] and [11] to panels [12] and secure with 2x bolts (L).
Tighten with an Allen Key (O).
10
10
10
11 11
11
12
L
L
L
O

Eclipse Entertainment Unit
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
6
910
Assembly Instructions
Attach panels [13] to panels [10] and [14] and secure with 8x bolts (L). Tighten
with an Allen Key (O). Attach 2x height adjuster (I) to panels [10] as shown.
Attach panels [14] to panel [2] and secure with 10x screws (E).
Attach panels [11] to panel [2] and secure with 2x screws (H).
Tighten with a screwdriver.
2
10
10
13
13
14
14
14
L
O
L
L
L
L
L
I
I
E
E
H
E
E
E
E
E
E
E
E
H
E
3
14
11
11

Eclipse Entertainment Unit
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
7
1211 x2
Attach 2x hinges (G) to panel [15] using 4x screws (F),
and attach 1x handle (M) to panel [15] and secure with
2x screw (N). Tighten with a screwdriver.
Tighten the
screws 90%..
Attach hinges on panels [15] to panels [3] and [5] and secure with
16x screws (F). Tighten with a screwdriver. Ensure the doors open
and close easily.
FF
G
F
F
G
F
F
G
M
NN
F
F
NOTE: If the doors are
uneven or there is a gap
in the middle, loosen or
tighten the screw on the
door hinge until they are
sitting flush.
F
3
15
3
15
3
15
5
3

Once assembled lift furniture into place, do not drag. Use a drill
to create a small hole lining up with the top of the safety strap (V).
Fasten to the wall using 1x washer (Z), 1x wall anchor (X) and 1x
wall screw (Y). Ensure unit is balanced and steady before use.
You’re done, enjoy!
Eclipse Entertainment Unit
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
8
1413
Attach 8x wedges (J) into the corners of the back of the unit and secure
with 8x screws (K). Tighten with a screwdriver. Attach 1x safety strap (V)
to the top of the back side of the unit as shown using 1x washer (Z) and
1x screw (W). Tighten with a screwdriver.
V
Z
W
V
Z
W
K
J
X
Y
Z
wall
anchor
screw
strap
washer

Eclipse Entertainment Unit
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
9
15
After installation, if the two handles are not aligned, loosen the screws in
the back, adjust the two handles to align them, and then tighten the screws
back up.
MM
MM
MM