Mocka Alexandria Change Table User manual

Alexandria Change Table
1
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558
Thank you for your purchase.
Please follow the instructions below for correct assembly.
A
Phillips & Flathead screwdrivers required.
For quicker assembly, we recommend the
use of a power drill on a low-speed setting.
D E
Wall Strap
1x
screw
1x
wall screw
F
2x
washer
G
1x
wall anchor
H
1x
wall strap
A
Hardware Supplied
bolt
x16
B
locking nuts
x16
C
dowel
x24

1 x2 2
Alexandria Change Table
2
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558
Attach 6 x dowels (C) and 6 x locking nuts (A) to panel [1] as shown.
Tighten with a screwdriver.
Attach panels [1] to panels [2] and panel [3] and secure with 12 x
locking nuts (B). Tighten with a screwdriver.
1
1
1
2
2
3
A
C
B
B
B
B

3
3
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558
Once assembled lift furniture into place, do not drag.
Attach wall strap (H) to panel [2] with 1x washer (F) and 1x screw (D).
Use a drill to create a small hole lining up with the safety strap (H).
Fasten to wall using 1x wall anchor (G), 1x washer (F) and 1x wall
screw (E).
Ensure unit is balanced and steady before use. You’re done, enjoy!
Alexandria Change Table