Mocka Kuranda Cabinet User manual

Kuranda Cabinet - Large
Assembly Instructions
Thank you for your purchase.
Please follow the instructions below for correct assembly.
Hardware Supplied
bolt
x8
locking
nut x8
small
screw x4
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
1
A B CD E
NM
L
K
J
I
H
G
F
wedge
x8
screw
x8
long
screw x12
handle
screw x4
handle
x2
felt
pad x4
shelf plug
x4
door plug
x4
Allen key
x1
WARNING: Any furniture that is not anchored to a wall has the potential to tip over in certain
circumstances, i.e. if a child attempts to climb up on the furniture or in the event of an earthquake.
Accordingly, we recommend that all furniture is anchored to a wall. We supply a free safety wall anchor
with all furniture sold and we recommend these are used to prevent your product tipping. The fixing device
provided should fit most wall types, but please note that different wall materials may require different fixing
devices from those supplied.
For quicker assembly, we recommend the
use of a power drill on a low-speed setting.
Phillips & Flathead screwdrivers
required
magnetic
bar x2
magnetic
x1
Wall Strap
x4
washer
Z
Y
wall
anchor
x2
XWV
screw
x2
wall
screw
x2
safety
strap x2

Kuranda Cabinet - Large
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
2
12
Insert 4x bolts (C) into panel [1]. Tighten with a screwdriver.
1
2
Attach 4x bolts (C) and 1x magnetic (B) to panel [2] with 2x small screws (E).
Tighten with a screwdriver.
C
C
C
C
C
C
C
C
E
B
E
B
EE

Kuranda Cabinet - Large
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
3
3 4
Slide panel [6] along the grooves between the panels [3] and [4].
3
3
4
4
6
5
Attach panels [3] and [4] to panel [5], secure with
4x long screws (A).Tighten with an allen key (I).
A
I
A
A
A

Kuranda Cabinet - Large
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
4
6
1
3
3
4
4
6
5
Attach panel [1] to panels [3] and [4], secure with 4x locking nut (D).
Tighten with a screwdriver.
Slide panel [6] along the grooves between the panels [3] and [4].
D
D
D
D

Kuranda Cabinet - Large
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
5
7 8
37
8
9
4
2
Attach panel [2] to panels [3] and [4], secure with 4x long screws (A).
Tighten with an allen key (I).
Attach panel [9] to panels [7] and [8], secure with 4x long screws (A).
Tighten with an allen key (I).
A
A
A
A
A
A
A
A

Kuranda Cabinet - Large
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
6
910
6
7
8
2
Attach panels [10] together with connect stick [11]. Slide panels [10]
along the grooves between the panels [7] and [8].
Attach panel [2] to panels [7] and [8], secure with 4x locking nuts (D).
Tighten with a screwdriver. Attach 4x felt pads (N) to panels [7] and [8].
7
8
10
10
11
N
N
N
N
D
D
D

Kuranda Cabinet - Large
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
7
1211
9
2
Attach 2x magnetic bars (H) to doors [12] and [13], secure
with 2x small screws (E). Tighten with a screwdriver. Insert 4x
door plugs (K) to doors [12] and [13] as shown.
Press door plugs (K) and attach doors [12] and [13] to panels [2] and [9].
Make sure the door open and close easily.
E
K
K
H
E
H
12
12
13
13
E
H
K
K
K

77
8
8
Kuranda Cabinet - Large
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
8
13 14
Attach 2x handles (F) to panels [12] and [13], secure with 4x handle
screws (G) and tighten with a screwdriver.
Insert 4x shelf plugs (J) into the unit at the desired height for the shelves
and rest the shelf panels [14] onto them. Ensure the shelves are balanced
and stable.
F
F
G
G
G
G
J
12
13
14
F
G
G

Kuranda Cabinet - Large
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
9
15 16
Attach 8x wedges (L) into the corners of the back of the unit and secure
with 8x screws (M). Tighten with a screwdriver. Attach 2x safety straps (V)
to the top of the back side of the unit as shown using 2x screws (W), 2x
washers (Z). Tighten with a screwdriver.
Once assembled lift furniture into place, do not drag. Use a drill to
create a small hole lining up with the top of the safety straps (V). Fasten
to wall using 2x wall anchors (X) and 2x wall screws (Y), 2x washers (Z).
Ensure unit is balanced and steady before use. You’re done, enjoy!
L
M
M
L
V
Z
W
V
Z
W
V
Z
W
X
Y
Z
X
Y
Z
wall
anchor
screw
strap
washer