Mocka Zara Four Drawer User manual

Zara Four Drawer
Assembly Instructions
Thank you for your purchase.
Please follow the instructions below for correct assembly.
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
1
Wall Strap
x2
washer
Z
Y
wall
anchor
x1
X
safety
strap x1
WV
screw
x1
wall
screw
x1
WARNING: Any furniture that is not anchored to a wall has the potential to tip over in certain
circumstances, i.e. if a child attempts to climb up on the furniture or in the event of an earthquake.
Accordingly, we recommend that all furniture is anchored to a wall. We supply a free safety wall anchor
with all furniture sold and we recommend these are used to prevent your product tipping. The fixing device
provided should fit most wall types, but please note that different wall materials may require different fixing
devices from those supplied.
For quicker assembly, we recommend the
use of a power drill on a low-speed setting.
bolt
x34
x8
A B C D EFGH
JKMN
I
O P Q R S
Hardware Supplied
dowel
x18
screw
x52
slide
rail x4
slide
rail x4
slide
rail x4
slide
rail x4
locking
nut x34
screw
x6
x8
wedge screw
x4
bracket
x4
bracket
cover
x4
seal
x4
Phillips & Flathead screwdrivers
L
felt
pad
x4
bolt
x16
x1
Allen
key
screw
x28

Zara Four Drawer
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
2
12
Insert 4x bolts (C) into panel [1] and tighten with a screwdriver. Attach 4x slide rail (F) and 4x slide rail (G) to panels [3]
and [4] as shown and secure with 24x screws (E). Tighten
with a screwdriver. Insert 10x bolts (C) into panels [3] and [4].
Tighten with a screwdriver.
.
G
CR
E
F
CL
E
C
1
3
4
C
C
C
C
CC
C
C
C
C
C
CC
E
E
E
F
E
E
E
F
E
E
E
F
E
E
E
F
E
E
EG
E
E
EG
E
E
EG
E
E
EG

Zara Four Drawer
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
3
3 4
Attach 3x bracket (M) to panel [5], secure with 6x screws (E). Tighten with
a screwdriver. Place 3x cover (N) over the bracket (M) as shown.
Attach panels [5], [6] and [7] to panel [3] with 5x dowels (A) and secure
with 5x locking nuts (D). Tighten with a screwdriver.
EE
EE
N
MM
The round head
is aligned with the
direction of the arrow.
M
A
x3 A
A
A
D
D
D
D
5
5
5
5
67
3
D

Zara Four Drawer
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
4
65
Attach panel [4] to panels [7], [5], [6] with 5x dowels (A) and
secure with 5x locking nuts (D). Tighten with a screwdriver.
Slide panel [8] down along the grooves between the panels [4] and [3] to
form the back of the unit as shown.
A
A
A
A
D
D
D
D
4
5
5
5
6
7
4
3
8

Zara Four Drawer
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
5
7 8
Attach panel [4] and panel [3] to panel [1] with 4x dowels (A)
and secure with 4x locking nuts (D). Tighten with a screwdriver.
Attach panel [6] to panel [1] and secure with 2x screws (B).
Tighten with a screwdriver.
Slide panel [8] down along the grooves between the panels [4]
and [3] to form the back of the unit as shown.
A
A
A
B
B
D
A
4
1
3
4
3
8
6

Zara Four Drawer
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
6
910
Assembly Instructions
Attach 1x bracket (M) to panel [2] and secure with 2x screws (E).
Tighten with a screwdriver. Place 1x cover (N) over the bracket (M)
as shown.
Attach panel [2] to the unit with 4x dowels (A) and secure with 4x
screws (B). Tighten with a screwdriver.
EE
EE
N
MM
The round head
is aligned with the
direction of the arrow.
M
22
4
3
B
B
A
A
A
B
B

Zara Four Drawer
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
7
12 Drawers x411
Attach 4x leg brackets (P) to legs [17] using 8x screws (R). Tighten
with a screwdriver. Attach leg [17] to panel [2] using 16x bolts (Q)
as shown. Tighten with an Allen key (S). Attach 4x felt pads (L) to
the ends of the legs.
Insert 5x bolts (C) into panels [9]/[10]/[11]. Attach 1x seal (O) to panels
[9]/[10]/[11] and secure with 1x screw (E). Tighten with a screwdriver.
R
P
17
17
CC
CC
C
E
O
x2
2
4
3
9
10
11
17
17
17
17
Q
Q
Q
Q
Q
L
L
L
L
L
S

Zara Four Drawer
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
8
14 Drawers x413 Drawers x4
Attach panels [12], [13] and [14] to panels [9]/[10]/[11] and secure
with 5x locking nuts (D). Tighten with a screwdriver.
Slide panel [15] along the grooves between the side panels [12] and [13].
DD
D
D
x2
9
10
11
x2
9
10
11
12
15
13
D
12
13
14

Zara Four Drawer
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
9
16 Drawers x415 Drawers x4
Attach panels [12], [13], [14] and [16] as shown using 5x screws (R).
Tighten with a screwdriver.
.
Attach slide rail (I) and slide rail (H) to the underside of the side panels
as shown. Secure with 4x screws (E) and tighten with a screwdriver.
H
E
E
RR
R
RR
E
E
I
16
12
13
13
12
x2
9
10
11
x2
9
10
11

Attach 8x wedges (J) into the corners of the back of the
unit and secure with 8x screws (K). Tighten with a screwdriver.
Attach 1x safety straps (V) to the top of the back side of the unit as
shown using 1x washers (Z) and 1x screws (W). Tighten with a
screwdriver.
Zara Four Drawer
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
10
1817
Insert the assembled drawers into the corresponding compartments
as shown. Ensure the drawers slide easily along the rails. If the door
is not catching or sitting flush, twist the end of the cover (N) until it
catches on the seal (O).
K
J
V
Z
W
K
J
V
Z
W
9
10
1
8
8
11
N

Zara Four Drawer
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
11
2019
You’re done, enjoy!
Once assembled lift furniture into place, do not drag. Use a drill to
create a small hole lining up with the top of the safety strap (V).
Fasten tothe wall using 1x washers (Z), 1x wall anchor (X) and
1x screws (Y). Ensure unit is balanced and steady before use.
X
Y
Z
wall
anchor
screw
strap
washer
1