Mocka Scarborough Coffee Table User manual

Scarborough Coffee Table
Assembly Instructions
Thank you for your purchase.
Please follow the instructions below for correct assembly.
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
1
WARNING: Any furniture that is not anchored to a wall has the potential to tip over in certain
circumstances, i.e. if a child attempts to climb up on the furniture or in the event of an earthquake.
Accordingly, we recommend that all furniture is anchored to a wall. We supply a free safety wall anchor
with all furniture sold and we recommend these are used to prevent your product tipping. The fixing device
provided should fit most wall types, but please note that different wall materials may require different fixing
devices from those supplied.
Phillips & Flathead screwdrivers required.
For quicker assembly, we recommend the
use of a power drill on a low-speed setting.
bolt
x14
leg bracket
x4
bolt
x4
len
key x1
al small
bolt
x16
screw
x8
long screw
x6
plug
x2
cover
x2
screw
x8
A B C D E F G
HJKLM
N
I
O
Hardware Supplied
PQR
dowel
x20
screw
x26
slide
rail x2
slide
rail x2
slide
rail x2
slide
rail x2
bracket
x2
S
locking
nut x14
felt pad
x4

Scarborough Coffee Table
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
2
12x2
C
C
C
C
C
C
1
Insert 6x bolts (C) into panel [1] and tighten with a screwdriver. Attach 1x slide rail (F) to panel [3] as shown with 3x screws (E). Tighten
with a screwdriver.
F
F
CL
E
3
E
E
E

Scarborough Coffee Table
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
3
34
Attach 1x slide rail (G) to panel [4] as shown with 3x screws (E).
Flip the panel [4], attach 1x slide rail (G) to panel [4] as shown
with 3x screws (E). Tighten with a screwdriver.
Attach panels [5] to panels [3], [4] and [5] with 8x dowels (A) as shown.
FLIP
G
CR
E
5
5
4
4
4
3
3
E
G
G
E
E
E
E
E
A
A
A
A

Scarborough Coffee Table
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
4
56
1
Attach panels [3] and [4] to panel [1] with 6x dowels (A) and
secure with 6x locking nuts (D). Tighten with a screwdriver.
Attach 2x brackets (J) to panel [2] and secure with 4x screws (E).
Tighten with a screwdriver. Place 2x covers (K) over the brackets
(J) as shown.
D
4
3
3
EE
K
JJ
The round head
is aligned with the
direction of the arrow
2
A
A
A
D
A
A
D
D
EE
J
EE
J

Scarborough Coffee Table
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
5
78
Attach panel [2] to the unit with 6x dowels (A) and secure
with 6x long screws (B). Tighten with a screwdriver.
Attach a leg bracket (P) to each leg [6] using 2x screws (R) and
1x bolt (Q). Tighten with a screwdriver and Allen key (O). Attach
each leg [6] to panel [2] using 4x small bolts (S) as shown. Tighten
with the Allen key (O). Attach 4x felt pads (N) to the ends of the legs.
4
3
3
2
2
front
back
Q
R
P
R
O
front
6
6
6
6
6
A
A
B
B
A
B
B
A
B
B
S
S
S
SS
S
N
N
N
SS
O
x4
SSS
N
N