Mocka Hudson Kids Table & Chairs User manual

ASSEMBLY INSTRUCTIONS
Thank you for purchasing a Mocka Hudson Kids Table & Chairs set.
Please follow the instructions below for correct assembly.
Hudson Kids Table & Chairs
mocka.co.nz | mocka.com.au
1
Once fully assembled please ensure all legs are
sitting ush against the table/stool underside to
ensure stability. Do not over-tighten screws.
The recommended age for this set is 2-6 years.
The weight limit on the stools and chairs is 70kg.
To ensure longevity of the wood please use a damp
cloth only for cleaning. Avoid use of household cleaners.
AB
x1
Allen key
x 52
screw
Hardware Supplied

ASSEMBLY INSTRUCTIONS
Hudson Kids Table & Chairs
mocka.co.nz | mocka.com.au
2
1
Find all four table legs and position them on the
underside of the table top. Using 3x screws (A) and the
allen key (B) attach each leg to the table.
Fasten all screws and ensure all legs are sitting
ush with the table underside to ensure stability.
Flip table over and it is ready for use.
2
A
x4
A x3
A x3
Assemble the table.

ASSEMBLY INSTRUCTIONS
Hudson Kids Table & Chairs
mocka.co.nz | mocka.com.au
3
3
4
Find one round seat pieces and four stool legs. Attach
each leg to the underside of the seat using 2x screws
(A) in each and tightening with the allen key (B). Ensure
all legs are securely fastened.
Repeat Step 3 to assemble the second stool.
Ensure all screws are fastened and legs sit ush
with underside of the seats.
Assemble the two stools:
AA
A
x4
A
AA
x2

ASSEMBLY INSTRUCTIONS
Hudson Kids Table & Chairs
mocka.co.nz | mocka.com.au
4
5 6
Find two round seat pieces and four leg braces. Attach
two leg braces to a round seat piece using 2x screws (A)
in each. Tighten screws with allen key (B).
Find two long chair leg pieces and attach to the leg
braces using 2x screws (A) in each. Fasten screws using
allen key (B) ensuring pieces sit ush against each other.
AA
A A
A
x2
A
A
x2
A
Assemble the two chairs:

ASSEMBLY INSTRUCTIONS
Hudson Kids Table & Chairs
mocka.co.nz | mocka.com.au
5
Take two front chair legs and attach in place using 2x
screws (A) in each leg. Tighten screws with allen key (B).
7 8
Push the back rest piece onto the tops of the chair legs
as shown. Repeat Steps 5 to 8 again to assemble the
second chair.
AA
A
x2
A
x2