Mocka Brooklyn Midi Drawers User manual

WARNING: Any furniture that is not anchored to a wall has the potential
to tip over in certain circumstances, i.e. if a child attempts to climb up
on the furniture or in the event of an earthquake. Accordingly, we
recommend that all furniture is anchored to a wall. We supply a free
safety wall anchor with all furniture sold and we recommend these are
used to prevent your product tipping. The fixing device provided should
fit most wall types, but please note that different wall materials may
require different fixing devices from those supplied.
Hardware Supplied
x8
B
A
x30
CD
EF G H
x8
x16
x30
x14
x40 x16
12 mm
L + R L + R
bolt
locking nut
dowel long screw
small screw hole cap
x1
washer
Z
Wall
Screw
r/washer
screw
x1
Y
wall
anchor
x1
X
Safety
Strap
Wall Strap
W
Once assembly is complete, please DO NOT drag the product
(lift only to move). Dragging may damage this product.
Phillips & Flathead screwdrivers required
Brooklyn Midi Drawers
1
mocka.co.nz | mocka.com.au
Assembly Instructions
Thank you for your purchase.
Please follow the instructions below for correct assembly.

12
Screw in bolts (A) and insert dowels (C) into holes in panel [2]. Slot
together with panel [3] as shown. Place locking nuts (B) into
corresponding holes and tighten with a screwdriver
Screw in bolts (A) and insert dowels (C) into holes in panel [2]. Slot
together with panel [4] as shown. Place locking nuts (B) into holes in
panel [4] and tighten with a screwdriver.
Bx2
A
x2
C
B
B
A
C
3
2
A
C
A
x2
C
B
x2
4
A
2C
C
AB
B
Brooklyn Midi Drawers
2
mocka.co.nz | mocka.com.au
Assembly Instructions

12
Screw in bolts (A) and insert dowels (C) into holes in panel [2]. Slot
together with panel [3] as shown. Place locking nuts (B) into
corresponding holes and tighten with a screwdriver
Screw in bolts (A) and insert dowels (C) into holes in panel [2]. Slot
together with panel [4] as shown. Place locking nuts (B) into holes in
panel [4] and tighten with a screwdriver.
Bx2
A
x2
C
B
B
A
C
3
2
A
C
A
x2
C
B
x2
4
A
2C
C
AB
B
34
Screw in 2x bolts (A) and insert 2x dowels (C) into holes in panel [5].
Slot together with the rest of the structure as shown. Place 2x locking
nuts (B) into holes in the panels and tighten with screwdriver.
Screw in 2x bolts (A) and insert 2x dowels (C) into holes in panel [6]. Slot
together with the rest of the structure as shown. Place 2x locking nuts (B)
into holes in the panel and tighten with a screwdriver.
A
A
C
C
A
x2
C
B
x2
5
A
A
C
C
6
A
x2
C
B
B
Bx2
B
B
Brooklyn Midi Drawers
3
mocka.co.nz | mocka.com.au
Assembly Instructions

56
Slot back panel [7] into grooves on the back of the unit. Ensure the
panel is aligned and slides down into place.
Screw 6x bolts (A) and insert 6x dowels (C) into holes in panel [1]. Slot
together with top panels [3], [5] and [6] as shown. Place 6x locking nuts
(B) into corresponding holes and tighten with a screwdriver.
1
AC
A
C
A
C
A
C
B
B
7
B
Bx6
B
B
Brooklyn Midi Drawers
Assembly Instructions
4
mocka.co.nz | mocka.com.au

Jolt Wardrobe
ASSEMBLY INSTRUCTIONS
5
mocka.co.nz | mocka.com.au
56
Slot back panel [7] into grooves on the back of the unit. Ensure the
panel is aligned and slides down into place.
Screw 6x bolts (A) and insert 6x dowels (C) into holes in panel [1]. Slot
together with top panels [3], [5] and [6] as shown. Place 6x locking nuts
(B) into corresponding holes and tighten with a screwdriver.
1
AC
A
C
A
C
A
C
B
B
7
B
Bx6
B
B
78
To assemble the drawers, first screw 4x bolts (A) into front panel [8]. Fit
panels [9] and [10] over the bolts as shown, ensuring the grooves in the
panels face inwards. Secure using 4x locking nuts (B) and tighten with
a screwdriver.
Slot panel [11] down into the grooves in the side and front panels.
Drawers (x4)
9
10
8
11
BB
B
AA
AA
A
x4
B
x4
Drawers (x4)
Brooklyn Midi Drawers
Assembly Instructions
5
mocka.co.nz | mocka.com.au

910
Place back panel [12] into position and fasten into place using 4x
screws (D).
Attach rail hardware (G) to both left and right side of the drawer using
screws (E). Repeat Steps 7 to 10 until all four drawers are fully
assembled.
Drawers (x4) Drawers (x4)
E
G
E
D
12
D
D
D
x4
D
E
Brooklyn Midi Drawers
Assembly Instructions
6
mocka.co.nz | mocka.com.au

910
Place back panel [12] into position and fasten into place using 4x
screws (D).
Attach rail hardware (G) to both left and right side of the drawer using
screws (E). Repeat Steps 7 to 10 until all four drawers are fully
assembled.
Drawers (x4) Drawers (x4)
E
G
E
D
12
D
D
D
x4
D
E
11
12
Attach 8x slide rails (F) inside cabinet using 3x small screws (E) in each
rail. Fasten all screws with a screwdriver.
Slide all four completed drawers into place on the rails in the cabinet.
Ensure they easily slide open and closed.
F
F
F
F
E
E
E
E
E
E
E
E
E
EE
E
E
E
E
E
x8
E
Brooklyn Midi Drawers
Assembly Instructions
7
mocka.co.nz | mocka.com.au

13 14
Attach 1x safety strap (W) to the top of the back side of the unit using
1x r/washer screw (Y). Tighten with a screwdriver.
Once assembled lift furniture into place, do not drag. Use a drill to create
a small hole lining up with the top of the safety strap (W). Fasten to wall
using 1x wall anchor (X), 1x washer (Z) and 1x wall 8 screw. Ensure unit
is balanced and steady before use. You’re done
Y
Y
W
W
X
Z
wall
anchor
wall
screw
Washer
Strap
Safety Strap
Brooklyn Midi Drawers
Assembly Instructions
8
mocka.co.nz | mocka.com.au