Mocka Olwyn User manual

Olwyn Side Table
Assembly Instructions
Thank you for your purchase.
Please follow the instructions below for correct assembly.
1
mocka.co.nz | mocka.com.au
*We recommend using a Flathead screwdriver to tighten all locking nuts 100% before first use.
Please clear any loose wood from the locking nut holes before inserting the nut to ensure it locks 100%.
Phillips screwdriver required
For quicker assembly, we recommend the
use of a power drill on a low-speed setting.
AB
Hardware Supplied
feet
x4
35 mm
long
screwx 16

Olwyn Side Table
Assembly Instructions
Thank you for your purchase.
Please follow the instructions below for correct assembly.
2
mocka.co.nz | mocka.com.au
12
Tighten with a screwdriver.
A
A
2
2
2
2
A
A
A
A
Attach parts [2] secure with 8 x long screws (A). Tighten with a screwdriver.
Attach parts [2] secure with 8 x long screws (A).
Legs (x2)

Olwyn Side Table
Assembly Instructions
Thank you for your purchase.
Please follow the instructions below for correct assembly.
3
mocka.co.nz | mocka.com.au
34
Attach panels [1] between the grooves on panels [2].
Screw the legs into the brackets as shown. Attach 4x feet (B) to the
bottom of the legs.
1
1
2
2
BB
B
B