Mocka Scarborough Four Drawer User manual

Scarborough Four Drawer
Assembly Instructions
Thank you for your purchase.
Please follow the instructions below for correct assembly.
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
1
bolt
x40
leg bracket
x4
bolt
x4
allen
key x1
screw
x8
long
screw x6
plug
x4
cover
x4
screw
x20
ABCD E F G
H J K LM N
I
OPQR
dowel
x14
screw
x52
slide
rail x4
slide
rail x4
slide
rail x4
slide
rail x4
bracket
x4
locking
nut x40
T
felt pad
x4
small bolt
x16
SU
Wall Strap
x2
washer
Z
Y
wall
anchor
x1
X
safety
strap x1
WV
screw
x1
wall
screw
x1
WARNING: Any furniture that is not anchored to a wall has the potential to tip over in certain
circumstances, i.e. if a child attempts to climb up on the furniture or in the event of an earthquake.
Accordingly, we recommend that all furniture is anchored to a wall. We supply a free safety wall anchor
with all furniture sold and we recommend these are used to prevent your product tipping. The fixing device
provided should fit most wall types, but please note that different wall materials may require different fixing
devices from those supplied.
For quicker assembly, we recommend the
use of a power drill on a low-speed setting.
Hardware Supplied
Phillips & Flathead screwdrivers
x8
wedge
screw
x8

Scarborough Four Drawer
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
2
12
1
3
Insert 4x bolts (C) into panel [1] and tighten with a screwdriver. Attach 4x slide rails (F) to panel [3] as shown with 12x screws (E).
Tighten with a screwdriver. Insert 8x bolts (C) into panel [3] and
tighten with a screwdriver.
F
CL
E
C
CC
C
C
C
CC
CC
C
C
E
E
F
F
F
F
E
E
E
E
E
E
E
E
E
E

Scarborough Four Drawer
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
3
34
6
2
4
Attach 4x slide rails (G) to panel [4] as shown with 12x screws (E).
Tighten with a screwdriver. Insert 8x bolts (C) into panel [4] and
tighten with a screwdriver.
Attach 4x brackets (J) to panels [2] and [6] secure with 8x screws (E).
Tighten with a screwdriver. Place 4x covers (K) over the brackets
(J) as shown.
G
CR
E
EE
K
JJ
The round head
is aligned with the
direction of the arrow
x3
EE
J
EE
J
C
C
CC
CC
C
C
G
G
G
G
E
E
E
EE
E
EE
E
E
E
E

Scarborough Four Drawer
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
4
56
3
Attach panels [5], [6] and [7] to panel [3] with 3x dowels (A) and
secure with 8x locking nuts (D). Tighten with a screwdriver.
Slide panel [8] down along the grooves between panels [3]
and [4].
DD
A
A
A
D
D
D
D
D
D
5
6
6
6
7
7
7
7
8

Scarborough Four Drawer
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
5
78
4
4
8
3
Attach panel [4] to panels [5], [6] and [7] with 3x dowels (A) and
secure with 8x locking nuts (D). Tighten with a screwdriver.
Slide panel [8] down along the grooves between panels [3]
and [4].
D
D
D
D
D
D
5
6
6
6
7
7
A
A
A

Scarborough Four Drawer
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
6
910
1
4
4
8
3
3
Attach panel [1] to panels [3] and [4] with 4x dowels (A) and
secure with 4x locking nuts (D). Tighten with a screwdriver.
Attach panel [1] to panel [5] secure with 2x long screws (B).
Tighten with a screwdriver.
Slide panel [8] down along the grooves between panels [3]
and [4].
A
A
D
A
D
B
B
D
5

Scarborough Four Drawer
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
7
11 12
2
2
9
9
9
9
9
4
3
Attach panel [2] to the unit with 4x dowels (A) and secure
with 4x long screws (B). Tighten with a screwdriver.
Attach a leg bracket (P) to each leg [9] using 2x screws (R) and
1x bolt (Q). Tighten with a screwdriver and Allen key (O). Attach
each leg [9] to panel [2] using 4x small bolts (S) as shown. Tighten
with the Allen key (O). Attach 4x felt pads (T) to the ends of the legs.
front
back
Q
R
P
R
O
front
B
A
B
A
B
B
A
B
S
S
S
S
S
O
x4
T
SSS
T
T
T
T

10
Scarborough Four Drawer
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
8
13 Drawer x 4 14 Drawer x 4
Insert 5x bolts (C) into panel [10]. Attach 1x plug (L) to panel [10]
and secure with 1x screw (E).Tighten with a screwdriver.
Attach panels [11], [12], [13] and [15] as shown using 5x screws (M).
Tighten with a screwdriver.
CC
C
CC
E
L
12
15
13
11
M
M
M
M
M

Scarborough Four Drawer
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
9
15 Drawer x 4 16 Drawer x 4
Slide panels [14] down along the grooves between panels [11]
and [12].
Attach panel [10] to panels [11], [12] and [13] using 5x locking nuts (D).
Tighten with a screwdriver.
12
14
11
12
10
13
11
D
D
DD
D

Scarborough Four Drawer
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
10
17 Drawer x 4 18
Attach slide rails (H) and slide rails (I) to the underside of the side panels
as shown. Secure with 4x screws (E) and tighten with a screwdriver.
Insert the drawers into the unit as shown. If the door is not catching or
sitting flush, twist the end of the cover (K) until it catches on the plug (L).
HE
E
I
E
E
K

Scarborough Four Drawer
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
11
19 20
Attach 8x wedges (U) to the back of the unit as shown, and secure
with 8x screws (N). Now attach 1x safety strap (V) to the back edge
of panel [1] using 1x washer (Z) and 1x screw (W). Tighten with a
screwdriver.
Once assembled lift furniture into place, do not drag. Use a drill to
create a small hole lining up with the top of the safety strap (V).
Fasten to the wall using 1x washers (Z), 1x wall anchor (X) and
1x screws (Y). Ensure unit is balanced and steady before use.
You’re done, enjoy!
V
Z
W
N
U
X
Y
Z
wall
anchor
screw
strap
washer
V
Z
W
N
U