Mocka Kids House Bookcase User manual

WARNING: Any furniture that is not anchored to a wall has the potential to tip
over in certain circumstances, i.e. if a child attempts to climb up on the furniture
or in the event of an earthquake. Accordingly, we recommend that all furniture
is anchored to a wall. We supply a free safety wall anchor with all furniture sold
and we recommend these are used to prevent your product tipping. The fixing
device provided should fit most wall types, but please note that different wall
materials may require different fixing devices from those supplied.
C
dowel
x26
A
bolt
x16
B
locking
nut x16
*We recommend using a Flathead screwdriver to tighten all locking nuts 100% before first use.
Please clear any loose wood from the locking nut holes before inserting the nut to ensure it locks 100%.
X
Z
Y
W
safety
strap
x3
screw
x3
long
screw
x3
wall
anchor
x3
washer
x3
Phillips & Flathead screwdrivers
For quicker assembly, we recommend the
use of a power drill on a low-speed setting.
E
small
screw x6
F
nut
x10
D
long bolt
x4
H
medium
screw x45
I
cover
x20
Kids House Bookcase
1
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558
Assembly Instructions
Thank you for your purchase.
Please follow the instructions below for correct assembly.

12
Insert 16x dowels (C) into panels [7], [8] and [11]. Attach panel [8] to
panel [6] and secure with 2x nuts (F) and 2x long bolts (D). Attach
panels [7] and [11] to panel [6] and secure with 6x locking nuts (B).
Tighten with a screw driver. Cover long bolts (D) with 2x covers (I)
Insert 12 x bolts (A) into panels [5] and [6]. Tighten with a screwdriver.
Kids House Bookcase
2
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558
Assembly Instructions

12
Insert 16x dowels (C) into panels [7], [8] and [11]. Attach panel [8] to
panel [6] and secure with 2x nuts (F) and 2x long bolts (D). Attach
panels [7] and [11] to panel [6] and secure with 6x locking nuts (B).
Tighten with a screw driver. Cover long bolts (D) with 2x covers (I)
Insert 12 x bolts (A) into panels [5] and [6]. Tighten with a screwdriver.
34
Insert 4 x dowels (C) and 4 x nuts (F) into panels [5] and [6]. Attach
panel [4] to panels [5], [6] and [11] and secure with 4 x long bolts (D)
and 2 x small screws (E). Tighten with a screwdriver. Cover nuts (F)
with 4 x covers (I).
Attach panels [7], [8] and [11] to panel [5] and secure with 6 x locking
nuts (B). Insert 2 x nuts (F) into panel [8] and secure panel [8] to panel
[5] with 2 x long bolts (D). Tighten with a screwdriver. Cover long bolts
(D) with 2 x covers (I).
Kids House Bookcase
3
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558
Assembly Instructions

56
Insert 4 x bolts (A) into panel [3]. Attach 3 x safety straps (W) to panel
[3] and secure with 3 x screws (Y). Tighten with a screwdriver.
Insert 2 x nuts (F) and 2 x dowels (C) into panel [2]. Attach panels [1] and
[2] and secure with 2 x long bolts (D). Tighten with a screwdriver. Cover
nuts (F) and long bolts (D) with 4 x covers (I).
Kids House Bookcase
Assembly Instructions
4
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558

Jolt Wardrobe
ASSEMBLY INSTRUCTIONS
5
mocka.co.nz | mocka.com.au
56
Insert 4 x bolts (A) into panel [3]. Attach 3 x safety straps (W) to panel
[3] and secure with 3 x screws (Y). Tighten with a screwdriver.
Insert 2 x nuts (F) and 2 x dowels (C) into panel [2]. Attach panels [1] and
[2] and secure with 2 x long bolts (D). Tighten with a screwdriver. Cover
nuts (F) and long bolts (D) with 4 x covers (I).
78
Attach panels [9] as shown and secure with 32x medium screws (H).
Tighten with a screwdriver.
Insert 4 x dowels (C) into panel [3]. Attach panel [3] to panels [5] and [6]
and secure with 4 x locking nuts (B). Tighten with a screwdriver. Cover
locking nuts (B) with 4 x covers (I).
Kids House Bookcase
Assembly Instructions
5
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558

910
Attach panel [10] as shown and secure with 13 x medium screws (H).
Tighten with a screwdriver.
Attach panels [1] and [2] to panel [3] and secure with 4 x small
screws (E). Tighten with a screwdriver. Cover small screws (E) with 4 x
covers (I).
Kids House Bookcase
Assembly Instructions
6
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558

910
Attach panel [10] as shown and secure with 13 x medium screws (H).
Tighten with a screwdriver.
Attach panels [1] and [2] to panel [3] and secure with 4 x small
screws (E). Tighten with a screwdriver. Cover small screws (E) with 4 x
covers (I).
11
Move the unit into the desired location up against a wall, do not drag.
Use a drill to create a small hole lining up with the top of the 3 x safety
straps (W) and secure with 3 x wall anchors (X), 3 x washers (Z) and
3 x long screws. Ensure the unit is balanced and steady before use.
You’re done, enjoy!
Kids House Bookcase
Assembly Instructions
7
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558