Mocka Parker Entertainment Unit User manual

WARNING: Any furniture that is not anchored to a wall has the potential to tip over
in certain circumstances, i.e. if a child attempts to climb up on the furniture or in the
event of an earthquake. Accordingly, we recommend that all furniture is anchored
to a wall. We supply a free safety wall anchor with all furniture sold and we
recommend these are used to prevent your product tipping. The fixing device
provided should fit most wall types, but please note that different wall materials
may require different fixing devices from those supplied.
For quicker assembly, we recommend the
use of a power drill on a low-speed setting.
A B1 B2 C D
EFI JH
Hardware Supplied
50mm
screw x8
30mm
screw x12
bolt &
nut x38
12mm
screw x16
wall
plug x2
wall
strap x2
14mm
screw x2
25mm
screw x2
50mm
screw x10
slide rail
x4
Phillips & Flathead screwdrivers required
*We recommend using a Flathead screwdriver to tighten all locking nuts 100% before first use.
Please clear any loose wood from the locking nut holes before inserting the nut to ensure it locks 100%.
E1
E4
E2
E3
K
dowel
x24
Parker Entertainment Unit
1
mocka.co.nz | mocka.com.au
Assembly Instructions
Thank you for your purchase.
Please follow the instructions below for correct assembly.

12
Attach the leg panels as shown using 8x 50mm screws (B1). Tighten
with a screwdriver.
Attach panel [2] to the leg panels using 12x 30mm screws (B2). Insert 8x
bolts (A) into panel [2]. Tighten with a screwdriver.
B1
B2
B1
B2
B2
B2
B1
B2
B1
B2
B2
B2
B2
B2
B2
B2
2
A
A
A
A
A
A
A
A
Parker Entertainment Unit
2
mocka.co.nz | mocka.com.au
Assembly Instructions

12
Attach the leg panels as shown using 8x 50mm screws (B1). Tighten
with a screwdriver.
Attach panel [2] to the leg panels using 12x 30mm screws (B2). Insert 8x
bolts (A) into panel [2]. Tighten with a screwdriver.
B1
B2
B1
B2
B2
B2
B1
B2
B1
B2
B2
B2
B2
B2
B2
B2
2
A
A
A
A
A
A
A
A
34
Insert 2x bolts (A) and attach 1x slide rail [E1] to panel [4] using 2x
12mm screws (C). Insert 2x bolts (A) and attach 1x slide rail [E3] to
panel [5] using 2x 12mm screws (C). Tighten with a screwdriver.
Attach 1x slide rail [E3] to one side of panel [6] using 2x 12mm screws
(C). Attach 1x slide rail [E1] to the other side of panel [6] using 2x 12mm
screws (C). Tighten with a screwdriver.
6
5
4
6
E3
E1
C
C
C
E3
C
C
E1
C
ip
A
A
A
A
Parker Entertainment Unit
3
mocka.co.nz | mocka.com.au
Assembly Instructions

56
Attach panels [4], [5], [6] and [7] to panel [3] as shown using 8x dowels
(F) and 8x locking nuts (A). Tighten with a screwdriver.
F
7
5
4
7
3F
F
FF
A
3
A
A
A
A
Insert 4x bolts (A) to the back of panel [3].
A
A
A
A
A
A
Parker Entertainment Unit
Assembly Instructions
4
mocka.co.nz | mocka.com.au

Jolt Wardrobe
ASSEMBLY INSTRUCTIONS
5
mocka.co.nz | mocka.com.au
56
Attach panels [4], [5], [6] and [7] to panel [3] as shown using 8x dowels
(F) and 8x locking nuts (A). Tighten with a screwdriver.
F
7
5
4
7
3F
F
FF
A
3
A
A
A
A
Insert 4x bolts (A) to the back of panel [3].
A
A
A
A
A
A
78
Attach panel [6] to panel [3] sing 2x dowels (F) and 2x 50mm screws (D).
Attach panels [4], [5] and [7] to panel [2] using 8x dowels (A) and 8x
locking nuts (A). Tighten with a screwdriver.
6
3
2
7
7
5
4
F
F
F
F
F
F
F
F
F
D
D
F
A
A
A
A
1
A
A
A
A
A
A
Insert 6x bolts (A) into the back of panel [1].
Parker Entertainment Unit
Assembly Instructions
5
mocka.co.nz | mocka.com.au