Mocka Sadie Six Cube Unit User manual

long
dowel x4
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
1
Wall Strap
x2
washer
Z
Y
wall
anchor
x1
X
safety
strap x1
WV
screw
x1
wall
screw
x1
WARNING: Any furniture that is not anchored to a wall has the potential to tip over in certain
circumstances, i.e. if a child attempts to climb up on the furniture or in the event of an earthquake.
Accordingly, we recommend that all furniture is anchored to a wall. We supply a free safety wall anchor
with all furniture sold and we recommend these are used to prevent your product tipping. The fixing device
provided should fit most wall types, but please note that different wall materials may require different fixing
devices from those supplied.
For quicker assembly, we recommend the
use of a power drill on a low-speed setting.
bolt
x16
bolt
x4
A B C D EF
GIJK
Hardware Supplied
dowel
x12
locking
nut x16
wedge
x8
felt pad
x8
Phillips & Flathead screwdrivers
and hammer required
H
screw
x8
Sadie Six Cube Unit
Assembly Instructions
Thank you for your purchase. Please follow the instructions for correct assembly.
While we took great effort to ensure these assembly instructions were correct at
the time of printing, sometimes updates are required post production. For the
most up to date versions please refer to the product page on our website.
mocka.com.au/mocka.co.nz
long
bolt x8
Allen
Key
x1
large
dowel x8

Sadie Six Cube Unit
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
2
1
C
C
C
C
C
C
C
C
1
Insert 8x bolts (C) into panel [1]. Tighten with a screwdriver.
Panel layout
1
3
5
5
2
6
6
6
6
7
4

Sadie Six Cube Unit
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
3
23
Insert 4x bolts (C) into panel [7]. Tighten with a screwdriver.Insert 4x bolts (C) into panel [3] and panel [4]. Tighten with a
screwdriver.
C
C
C
C
C
C
C
C
3
4
7

Sadie Six Cube Unit
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
4
54
F
F
F
F
E
E
E
E
D
D
D
6
6
7
7
6
6
Attach panels [6] to panel [7] with 4x long dowels (F) and secure with 4x
bolts (E). Tighten with an Allen key (J).
Attach panels [6] to panel [7] secure with 4x locking nuts (D). Tighten with a
screwdriver.
E
J
D

Sadie Six Cube Unit
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
5
6 7
Slide panel [5] down along the grooves between the panels [3] and [4] as shown.
D
D
A
A
AD
D
3
4
7
5
4
3
Attach panels [3] and [4] to panel [7] with 4x dowels (A) and secure
with 4x locking nuts (D). Tighten with a screwdriver.

Sadie Six Cube Unit
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
6
8 9
Slide panel [5] down along the grooves between the panels [3] and [4] as shown.Attach panel [2] to panels [3], [4] and [6] with 4x large dowels (G), 4x
dowels (A) and secure with 8x long bolts (B) as shown.Tighten with
an Allen Key (J). Apply 8x felt pads (K) to the panel [2] as shown.
K
K
K
K
K
K
K
K
A
G
G
G
A
B
B
B
B
B
B
B
B
4
6
6
3
2
5
4
3
KB
J

Sadie Six Cube Unit
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
7
10
Assembly Instructions
11
A
A
D
D
D
D
1
3
6
6
4
Attach panel [1] to panels [3] and [4] with 4x large dowels (G) and
secure with 4x locking nuts (D). Tighten with a screwdriver. Attach
panel [1] to panels [6] with 4x dowels (A) and secure with 4x locking
nuts (D). Tighten with a screwdriver.
I
H
I
H
H
H
I
I
V
Z
W
HI
HI
I
I
H
H
Attach 8x wedges (H) into the corners of the back of the unit and secure
with 8x screws (I). Tighten with a screwdriver. Attach 1x safety straps (V)
to the top of the back side of the unit as shown using 1x washers (Z) and
1x screws (W). Tighten with a screwdriver.
I
H
V
Z
W
GG
G

12
Sadie Six Cube Unit
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
8
13
X
Y
VZ
wall
anchor
screw
washer
strap
Once assembled lift furniture into place, do not drag. Use a drill to
create a small hole lining up with the top of the safety strap (V).
Fasten to the wall using 1x washer (Z) , 1x wall anchor (X) and
1x wall screw (Y). Ensure unit is balanced and steady before
use.
You’re done, enjoy!