Mocka Jesse Changing Tray User manual

Jesse Changing Tray
Assembly Instructions
Thank you for your purchase.
Please follow the instructions below for correct assembly.
Hardware Supplied
dowel
x8
bracket
x2
bolt
x8
locking nut
x8
small screw
x8
WARNING: Any furniture that is not anchored to a wall has the
potential to tip over in certain circumstances, i.e. if a child attempts to
climb up on the furniture or in the event of an earthquake. Accordingly,
we recommend that all furniture is anchored to a wall. We supply a
free safety wall anchor with all furniture sold and we recommend
these are used to prevent your product tipping. The fixing device
provided should fit most wall types, but please note that different wall
materials may require different fixing devices from those supplied.
mocka.co.nz | mocka.com.au
1
A B C D E
Phillips & Flathead screwdrivers required.
For quicker assembly, we recommend the
use of a power drill on a low-speed setting.

Jesse Changing Tray
Assembly Instructions
mocka.co.nz | mocka.com.au
2
12
2
3
C
C
C
C
C
C
C
C
1
1
3
A
D
D
A
Insert 4x cam bolts (C) into panel [2]. Insert 4x cam bolts (C) into panel [3].
Tighten with a screwdriver.
Insert 2x dowels (A) into panel [3]. Attach panels [1] and [3] using 2x locking
nuts (D).Tighten with a screwdriver.

Jesse Changing Tray
Assembly Instructions
mocka.co.nz | mocka.com.au
3
3 4
1
1
3
4
3
5
5
AD
A
D
Slide panel [4] along the grooves between the side panels [1] to form the
base of the tray.
Insert 2x dowels (A) into panel [3]. Attach panels [5] and [3] using 2x
locking nuts (D).Tighten with a screwdriver.

Jesse Changing Tray
Assembly Instructions
mocka.co.nz | mocka.com.au
4
56
3
2
5
5
D
D
D
D
A
A
A
A
E
E
B
B
E
E
Insert 4x dowels (A) into panel [2]. Attach panels [1], [5] and [2] using 4x
locking nuts (D). Tighten with a screwdriver.
Attach tray to the unit using 2x bracket (B) and secure with 8x screw (E).
Tighten with a screwdriver. You’re done, enjoy!