Mocka Sonata User manual

Sonata Change Table
1
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558
Thank you for your purchase.
Please follow the instructions below for correct assembly.
WARNING: Any furniture that is not anchored to a wall has the potential to tip
over in certain circumstances, i.e. if a child attempts to climb up on the furniture
or in the event of an earthquake. Accordingly, we recommend that all furniture
is anchored to a wall. We supply a free safety wall anchor with all furniture sold
and we recommend these are used to prevent your product tipping. The fixing
device provided should fit most wall types, but please note that different wall
materials may require different fixing devices from those supplied.

12
Sonata Change Table
2
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558
Attach panel [1] to panels [2], [3], [4] and [5] and secure with 10 x bolts
(A). Tighten with an Allen Key (B).
Note: The concave holes should face outwards when assembly.
Flip unit over to other side as shown. Attach panel [1] to panels [2], [3],
[4] and [5] and secure with 10 x bolts (A). Tighten with an Allen Key (B).

3
3
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558
Once assembled lift furniture into place, do not drag.
Attach wall strap (G) to unit as shown with 1x washer (E) and 1x screw
(C). Use a drill to create a small hole lining up with the safety strap (G).
Fasten to wall using 1x wall anchor (F), 1x washer (E) and 1x wall
screw (D). Ensure unit is balanced and steady before use. You’re
done, enjoy!
Sonata Change Table