Mocka Jolt Bedside User manual

Jolt Bedside Table
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
1
Wall Strap
x2
washer
Z
Y
wall
anchor
x1
X
safety
strap x1
WV
screw
x1
wall
screw
x1
bolt
x18 x4
A B C D E F
GH
Hardware Supplied
dowel
x18
screw
x20
slide
rail x2
slide
rail x2
slide
rail x2
slide
rail x2
locking
nut x18
screw
x8
I J
WARNING: Any furniture that is not anchored to a wall has the potential to tip over in certain
circumstances, i.e. if a child attempts to climb up on the furniture or in the event of an earthquake.
Accordingly, we recommend that all furniture is anchored to a wall. We supply a free safety wall anchor
with all furniture sold and we recommend these are used to prevent your product tipping. The fixing device
provided should fit most wall types, but please note that different wall materials may require different fixing
devices from those supplied.
For quicker assembly, we recommend the
use of a power drill on a low-speed setting.
Phillips & Flathead screwdrivers
and hammer required
Thank you for your purchase. Please follow the instructions for correct assembly.
While we took great effort to ensure these assembly instructions were correct at
the time of printing, sometimes updates are required post production. For the
most up to date versions please refer to the product page on our website.
mocka.com.au/mocka.co.nz
plastic
glides
K
x8
small nail

Jolt Bedside Table
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
2
Panel layout
Insert 4x bolts (C) into panel [1] and tighten with a screwdriver.
1
1
1
30
31
32
33
35
4
2
2
6
3
x2
C
C
C
C
7
5
5
8
7

Jolt Bedside Table
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
3
2 3
Attach 2x slide rails (G) and 2x slide rails (H) to panels [3] and
[4] as shown and secure with 12x screws (E). Tighten with
a screwdriver.
E
G
G
H
H
H
G
E
E
E
E
E
E
E
E
E
E
E
E
E
3
3
4
4
c
c
A
A
A
A
AA
A
C
C
C
c
CL
CR
Insert 6x bolts (C) into panels [3] and [4]. Attach 7x dowels (A) into panel [3]
as shown. Tighten with a screwdriver.

Jolt Bedside Table
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
4
54
Attach panel [4] to panels [2], [6] and [7] with 7x dowels (A) and secure with
3x locking nuts (D). Tighten with a screwdriver.
Attach panels [2], [6] and [7] to panel [3] secure with 3x locking
nuts (D). Tighten with a screwdriver.
2
2
2
6
2
4
3
6
7
7
7
7
D
D
D
D
A
A
A
A
A
D
D
D

5
8
54
3
5
5
Jolt Bedside Table
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
5
6 7
Put back panels [5] into the groove on the back of the chest. screw with
8x small nail (K). Holes are not pre-drilled so you need to put some pressure
with screwdriver to get started. lift unit back up Attach 4x plastic glides (F)
to the panels [3] and [4] using a hammer as shown.
K
F
F
F
F
F
Attach panels [5] together with connect stick [8].
x8

Jolt Bedside Table
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
6
8 9 Drawers x2
Attach panel [1] to panels [3] and [4] with 4x dowels (A) and secure
with 4x locking nuts (D). Tighten with a screwdriver.
Insert 4x bolts (C) into panel [35]. Tighten with a screwdriver.
D
A
A
AA
D
D
D
3
1
4
C
C
C
C
35

Jolt Bedside Table
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
7
10 Drawers x2 11 Drawers x2
Assembly Instructions
Slide panel [33] down along the grooves between the side panels
[30] and [31].
D
DD
D
35
30
30
31
31
33
Attach panels [30] and [31] to panel [35] secure with 4x locking nuts (D).
Tighten with a screwdriver.

Attach slide rail (I) and slide rail (J) to the underside of the side panels
as shown. Secure with 4x screws (E) and tighten with a screwdriver.
Jolt Bedside Table
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
8
13 Drawers x212 Drawers x2
B
B
B
B
E
E
E
E
I
J
32
31
31
30
30
Attach panels [30] and [31] to panel [32] secure with 4x screws (B).
Tighten with a screwdriver.

Jolt Bedside Table
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
9
15 Drawers x214 Drawers x2
Insert the assembled drawers into the corresponding compartments
as shown. Ensure the drawers slide easily along the rails.
V
Z
W
Attach 1x safety strap (V) to the top of the back side of the unit as shown
using 1x washer (Z) and 1x screw (W). Tighten with a screwdriver.
V
Z
W
5
5

Jolt Bedside Table
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
10
1716
V
X
wall
anchor
screw
strap
washer
Once assembled lift furniture into place, do not drag. Use a drill to
create a small hole lining up with the top of the safety strap (V).
Fasten to the wall using 1x washers (Z) , 1x wall anchors (X) and
1x wall screws (Y). Ensure unit is balanced and steady before use.
You’re done, enjoy!
You’re done, enjoy!