Mocka Kirra Bedside Table User manual

Kirra Bedside Table
Assembly Instructions
Thank you for your purchase.
Please follow the instructions below for correct assembly.
Hardware Supplied
dowl
x8
bolt
x4
screw
x8
locking nut
x4
small screw
x16
mocka.co.nz | mocka.com.au
1
A B CD E
NML
K
J
I
HG
F
wedge
x4
scerw
x4
long scerw
x4
Wall Strap
x2
washer
Z
Y
wall
anchor
x1
X
safety
strap x1
WV
screw
x1
wall
screw
x1
WARNING: Any furniture that is not anchored to a wall has the potential to tip over in certain
circumstances, i.e. if a child attempts to climb up on the furniture or in the event of an earthquake.
Accordingly, we recommend that all furniture is anchored to a wall. We supply a free safety wall anchor
with all furniture sold and we recommend these are used to prevent your product tipping. The fixing device
provided should fit most wall types, but please note that different wall materials may require different fixing
devices from those supplied.
Phillips & Flathead screwdrivers required.
For quicker assembly, we recommend the
use of a power drill on a low-speed setting.
CL runner tracks
x2
CR runner tracks
x2
DL runners
x2
DR runners
x2
screw
x16
O
small bolt
x8
small locking
nut
x8

Kirra Bedside Table
Assembly Instructions
mocka.co.nz | mocka.com.au
2
12
Attach 2x slide rails (F) to panel [2] and secure with 4x small screws (E).
Attach 2x slide rails (G) to panel [3] and secure with 4x small screws (E).
Tighten with a screwdriver.
3
E
E
E
E
G
G
G
CR
E
2
E
E
E
E
F
F
F
CL
E
1
C
A
C
A
C
A
C
A
Insert 4x dowels (A) to panel [1]. Insert 4x bolts (C) into panel [1].
Tighten with a screwdriver.

Kirra Bedside Table
Assembly Instructions
mocka.co.nz | mocka.com.au
3
3 4
Slide panel [5] down along the grooves of the side panels to form the back
of the unit.
1
2
3
D
D
D
2
3
5
Attach panels [2] and [3] to panel [1] and secure with 4x locking nuts (D).
Tighten with a screwdriver.

Kirra Bedside Table
Assembly Instructions
mocka.co.nz | mocka.com.au
4
6
2
3
4
A
M
M
M
M
A
A
5
4
6
6
6
6
J
J
J
J
J
J
J
J
Attach panel [4] to the rest of the unit using 4x dowels (A).
Secure with 4x screws (M) and tighten with a screwdriver.
Attach the legs [6] to panel [4] as shown using 16x screw (J) .Tighten
with a screwdriver.

Kirra Bedside Table
Assembly Instructions
mocka.co.nz | mocka.com.au
5
7 8
NN
7
NN
x 2
O
O
O
O
7
8
9
x 2
Insert 4x small bolts (N) to panel [7].Tighten with a screwdriver. Attach panels [8] and [9] to panel [7] and secure with 4x small locking nuts (O).
Tighten with a screwdriver.

Kirra Bedside Table
Assembly Instructions
mocka.co.nz | mocka.com.au
6
910
7
8
9
10
x 2
B
B
B
B
8
9
11
x 2
Slide panel [10] down along the grooves of panels [8] and [9]. Attach panel [8], [9] and [11] as shown using 4x screws (B).
Tighten with a screwdriver.

Kirra Bedside Table
Assembly Instructions
mocka.co.nz | mocka.com.au
7
1211
E
E
E
E
H
I
8
9
7
7
x 2
Attach slide rails (I) and slide rails (H) to the underside of the side panels
as shown. Secure with 4x screws (E) and tighten with a screwdriver.
Insert the assembled drawers into the corresponding compartments
as shown. Ensure the drawers slide easily along the rails.

Kirra Bedside Table
Assembly Instructions
mocka.co.nz | mocka.com.au
8
13 14
Attach 4x wedges (K) into the corners of the back of the unit and secure
with 4x screws (L). Tighten with a screwdriver.Attach 1x safety strap (V)
to the top of the back side of the unit as shown using 1x washer (Z) and
1x screw (W). Tighten with a screwdriver.
Once assembled lift furniture into place, do not drag. Use a drill to create
a small hole lining up with the top of the safety strap (V). Fasten to wall
using 1x washer (Z), 1x wall plug (X) and 1x screw (Y). Ensure unit is
balanced and steady before use. You’re done, enjoy!
5
1
V
V
Z
Z
W
W
K
L
1
X
Y
Z
K
L
K
L
K
L
K
L