MSG Equipment MS121 User manual

USER MANUAL
TESTER FOR ELECTROMAGNETIC VALVES AND
CLUTCHES OF AIR CONDITIONER COMPRESSORS
QUALITY UNIQUENESS
INNOVATION TRAININGSERVICE
WARRANTY
MSG MS121
2016.09.08

2
User Manual - Tester MSG MS0121
1. DESCRIPTION ......................................................................................................................................................3
2. TECHNICAL CHARACTERISTICS........................................................................................................................4
3. CONTROL UNITS..................................................................................................................................................5
3.1 Buttons .........................................................................................................................................................5
3.2 Connection Terminals..............................................................................................................................5
3.3 Indicators....................................................................................................................................................6
4. SETTING INTO OPERATION...............................................................................................................................6
5. STEP-BY-STEP INSTRUCTION..........................................................................................................................7
CONTENTS

3
1. DESCRIPTION
MS121 Tester is a modern, essential and easy-to-use device for car service centers nowadays,
dealing with air conditioners. The tester combines two devices: electromagnetic valve tester and
electromagnetic clutch tester.
The device is optimized for simulation of electromagnetic valve control signals, measuring of valve
and/or clutch current consumption.
Indicatorswith diagnosticparameters:current consumption,set performanceof anelectromagnetic
valve (from 0% to 100%), functioning, short circuit, open circuit are disposed on the front panel.
The tester has built-in short circuit protection of supply and testing outputs. Built-in operating
algorithm allows connection of tested electromagnetic valves and clutches without observance of
polarity.
User Manual - Tester MSG MS0121

4
Technical characteristics
Supply voltage, V 12-15
Supply type Batteries, constant voltage source
12-15 V
Dimensions, mm 155*97*30
Weight, kg 0.2
Air conditioner electromagnetic valves testing
Voltage, V 12
Tested parameters
- Duty cycle
- Сurrent consumption
- Open circuit, short circuit
Ampere meter accuracy, A 0.1
Automatic valve polarity selection Yes
Short circuit protection Yes
Types - Diode
- No diode
Air conditioner electromagnetic clutches testing
Voltage, V 12
Tested parameters
- Сurrent consumption
- Open circuit
- Short circuit
Current measurement accuracy, A 0.1
Automatic clutch polarity selection Yes
Short circuit protection Yes
Types - Diode
- No diode
2. TECHNICAL CHARACTERISTICS
User Manual - Tester MSG MS0121

5
3. CONTROL UNITS
Used to increase electromagnetic valve performance of air conditioner compressor.
Performance increases by 5% after short pressing, performance increases up to
maximum value – 100% after long pressing.
Usedtodecrease electromagnetic valve performanceof airconditionercompressor.
Performance decreases by 5% after short pressing, performance decreases up to
maximum value – 0% after long pressing.
Electromagnetic valve and clutch on/off switch.
3.1 B
Used to connect the electromagnetic clutch.
Used to connect the electromagnetic valve.
Used to connect the tester to power supply.
3.2 C T
Fig 1. Tester MS121 – Control panel
User Manual - Tester MSG MS0121

6
Indicator displays performance value of electromagnetic valve
from 0% to 100%.
Indicator displays current consumption value of electromagnetic
valve, electromagnetic clutch, or their total value.
3.3 I
Electromagnetic valve operability LED indicators:
• Functioning EV: indicator is on under faultless electromagnetic valve,
connected to the tester.
• Open circuit EV: indicator is on under open circuit between the tester and
the electromagnetic valve, or under open circuit of electromagnetic valve
winding.
• Short circuit EV: indicator is on under short circuit between the tester and the electromagnetic
valve, or under short circuit of electromagnetic valve winding.
Electromagnetic clutch operability LED indicators:
• Functioning EС: indicator is on under faultless electromagnetic clutch,
connected to the tester.
• Open circuit EС: indicator is on under open circuit between the tester and
the electromagnetic clutch, or under open circuit of electromagnetic clutch
winding.
• Short circuit EС: indicator is on under short circuit between the tester and the electromagnetic
clutch, or under short circuit of electromagnetic clutch winding.
4. SETTING INTO OPERATION
Check the set received. It must contain:
• tester
• wires to connect electromagnetic valve and clutch
User Manual - Tester MSG MS0121

7
• wires to connect the batteries
• User Manual.
Inspect the tester for existence of damage. If it is found, please contact either the manufacturer or
trade representative before launching the equipment.
5. STEPBYSTEP INSTRUCTION
It is strongly recommended to learn actual User Manual before launching the tester.
Electromagnetic Valve and Clutch Testing
Connect the tester to 12V power supply. Car storage battery or other device with the corresponding
parameters will suit.
Indicators is on under correct connection.
Connect electromagnetic valve and/or clutch to the corresponding connection terminals, there is
no need to observe the polarity.
Switch on the tester.
Electromagnetic valve and clutch LED indicators are on.
Current value is displayed on the indicator of current consumption of electromagnetic valve and
clutch. On increasing performance of connected electromagnetic valve, current value increases; on
decreasing performance of connected electromagnetic valve, current value decreases.
User Manual - Tester MSG MS0121