MSI MS-98L1 User manual

i
MS-98L1
(v1.x) Industrial Computer Board

ii iii
Preface MS-98L1
Copyright and Trademarks Notice
Copyright © Micro-Star Int’l Co., Ltd. All rights reserved. The MSI logo used is
a registered trademark of Micro-Star Int’l Co., Ltd. All other marks and names
mentioned may be trademarks of their respective owners. No warranty as to
accuracy or completeness is expressed or implied. MSI reserves the right to
make changes to this document without prior notice.
Revision History
Revision Date
V1.0 2019/07
Technical Support
If a problem arises with your product and no solution can be obtained from
the user’s manual, please contact your place of purchase or local distributor.
Alternatively, please visit https://www.msi.com/support/ for further guidance.

ii iii
Preface MS-98L1
Safety Instructions
￭Always read the safety instructions carefully.
￭Keep this User’s Manual for future reference.
￭Keep this equipment away from humidity.
￭Lay this equipment on a reliable at surface before setting it up.
￭The openings on the enclosure are for air convection hence protects the
equipment from overheating. DO NOT COVER THE OPENINGS.
￭Make sure the voltage of the power source and adjust properly 110/220V
before connecting the equipment to the power inlet.
￭Place the power cord such a way that people can not step on it. Do not place
anything over the power cord.
￭Always Unplug the Power Cord before inserting any add-on card or module.
￭All cautions and warnings on the equipment should be noted.
￭Never pour any liquid into the opening that could damage or cause electrical
shock.
￭If any of the following situations arises, get the equipment checked by
service personnel:
▶The power cord or plug is damaged.
▶Liquid has penetrated into the equipment.
▶The equipment has been exposed to moisture.
▶The equipment does not work well or you can not get it work according
to User’s Manual.
▶The equipment has dropped and damaged.
▶The equipment has obvious sign of breakage.
￭DO NOT LEAVE THIS EQUIPMENT IN AN ENVIRONMENT
UNCONDITIONED, STORAGE TEMPERATURE ABOVE 60oC, IT MAY
DAMAGE THE EQUIPMENT.

iv v
Preface MS-98L1
Chemical Substances Information
In compliance with chemical substances regulations, such as the EU REACH
Regulation (Regulation EC No. 1907/2006 of the European Parliament and the
Council), MSI provides the information of chemical substances in products at:
https://www.msi.com/html/popup/csr/evmtprtt_pcm.html
Battery Information
European Union:
Batteries, battery packs, and accumulators should not be
disposed of as unsorted household waste. Please use the
public collection system to return, recycle, or treat them in
compliance with the local regulations.
廢電池請回收
Taiwan:
For better environmental protection, waste batteries should
be collected separately for recycling or special disposal.
California, USA:
The button cell battery may contain perchlorate material
and requires special handling when recycled or disposed
of in California.
For further information please visit:
https://www.dtsc.ca.gov/hazardouswaste/perchlorate/
Danger of explosion if battery is incorrectly replaced. Replace only with the
same or equivalent type recommended by the manufacturer.

iv v
Preface MS-98L1
CE Conformity
Hereby, Micro-Star International CO., LTD declares that this device
is in compliance with the essential safety requirements and other
relevant provisions set out in the European Directive.
FCC-B Radio Frequency
Interference Statement
This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in accordance with
the instruction manual, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment o󰘯 and
on, the user is encouraged to try to correct the interference by one or more of the
measures listed below:
￭Reorient or relocate the receiving antenna.
￭Increase the separation between the equipment and receiver.
￭Connect the equipment into an outlet on a circuit di󰘯erent from that to
which the receiver is connected.
￭Consult the dealer or an experienced radio/television technician for
help.
Notice 1
The changes or modi󰘰cations not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
Notice 2
Shielded interface cables and AC power cord, if any, must be used in order to
comply with the emission limits.
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions:
1) this device may not cause harmful interference, and
2) this device must accept any interference received, including interference that
may cause undesired operation.
WEEE Statement
Under the European Union (“EU”) Directive on Waste Electrical and
Electronic Equipment, Directive 2012/19/EU, products of “electrical
and electronic equipment” cannot be discarded as municipal waste
anymore and manufacturers of covered electronic equipment will be
obligated to take back such products at the end of their useful life.

vi vii
Preface MS-98L1
CONTENTS
Copyright and Trademarks Notice................................................................. ii
Revision History ............................................................................................ ii
Technical Support.......................................................................................... ii
Safety Instructions.........................................................................................iii
Chemical Substances Information ............................................................... iv
Battery Information....................................................................................... iv
CE Conformity............................................................................................... v
FCC-B Radio Frequency Interference Statement ......................................... v
WEEE Statement .......................................................................................... v
1. Overview.......................................................................................1-1
Specications.............................................................................................1-2
Layout ........................................................................................................1-6
Rear Panel I/O Options..............................................................................1-7
2. Hardware Setup ...........................................................................2-1
Components Reference Guide...................................................................2-2
CPU (Central Processing Unit) ..................................................................2-4
Memory ......................................................................................................2-7
Storage.......................................................................................................2-9
Power Supply........................................................................................... 2-11
Rear Panel I/O .........................................................................................2-13
Connectors...............................................................................................2-15
Jumpers ...................................................................................................2-21
Slots .........................................................................................................2-22
3. BIOS Setup...................................................................................3-1
Entering Setup ...........................................................................................3-2
The Menu Bar ............................................................................................3-4
Main ...........................................................................................................3-5
Advanced ...................................................................................................3-6
Boot..........................................................................................................3-12
Security ....................................................................................................3-13
Chipset.....................................................................................................3-22
Power .......................................................................................................3-23
Save & Exit...............................................................................................3-25

vi vii
Preface MS-98L1
Appendix GPIO WDT BKL Programming ...................................... A-1
Abstract..................................................................................................... A-2
General Purposed IO ................................................................................ A-3
Watchdog Timer ........................................................................................ A-4
LVDS Backlight Brightness Control........................................................... A-5
SMBus Access .......................................................................................... A-6

1-1-1
Thank you for choosing the MS-98L1, an excellent industrial computer
board.
Based on the innovative Intel®Coffee Lake-S/ Coffee Lake-S Refresh
Processor, the MS-98L1 is engineered to provide reliable performance
for a wide variety of industrial applications.
1Overview

1-2 1-3
Overview MS-98L1
Specications
Processor
■SKU1 (C246) supports 8th Gen Intel® Coffee Lake-S Processors (Maximum
95W)
-Intel® Xeon E-2176G/E-2124G
-Intel® Core i3-8100
-Intel® Pentium G5400
-Intel® Celeron G4900
■SKU1 (C246) supports 9th Gen Intel® Coffee Lake-S Refresh Embedded
IOTG Processors (Maximum 65W)
-Intel® Xeon E-2278GEL
-Intel® Core i7-9700E/i7-9700TE
-Intel® Core i5-9500E/i5-9500TE
-Intel® Core i3-9100E/i3-9100TE
■SKU2 (Q370), SKU3 (H310), SKU4 (H310) support 8th Gen Intel® Coffee
Lake-S Processors (Maximum 95W)
-Intel® Core i7-8700/i7-8700T
-Intel® Core i5-8500/i5-8500T
-Intel® Core i3-8100/i3-8100T
-Intel® Pentium G5400/5400T
-Intel® Celeron G4900/G4900T
■SKU2 (Q370), SKU3 (H310), SKU4 (H310) support 9th Gen Intel® Coffee
Lake-S Refresh Embedded IOTG Processors (Maximum 65W)
-Intel® Core i7-9700E/i7-9700TE
-Intel® Core i5-9500E/i5-9500TE
-Intel® Core i3-9100E/i3-9100TE
PCH
■Intel® C246/Q370/H310 Express Chipset
Memory
■2 * DDR4 SO-DIMM slots
■Dual-Channel DDR4 ECC/Non ECC memory up to 2666MHz
■Max 32GB
Network
■SKU1 (C246)
-1 * Intel® I219-LM GbE
-3 * Intel® I210-AT GbE
■SKU2 (Q370)
-1 * Intel® I219-LM GbE
-1 * Intel® I210-AT GbE
■SKU3 (H310)
-1 * Intel® I219-LM GbE
-3 * Intel® I211-AT GbE
■SKU4 (H310)
-1 * Intel® I219-LM GbE
-1 * Intel® I211-AT GbE