National Cycle VStream N20307 Sport Installation instructions

TOOLS REQUIRED:
3mm Hex Key
Phillips Screwdriver
PARTS LIST
Inde Description Qty.
1 Windshield, Hard Coated Lexan® polycarbonate 1
Bag#1103
2 Screws, M5 Nylon Black 6
I STALLATIO
Stock nylon screws or ylon Screws (2) from
Bag#1103 may be used during installation.
1. emove the 2 screws holding plastic front plate to top
surface of windscreen. Figure 1 (3mm Hex Key)
2. emove front plate.
3. emove the 6 screws holding the stock windscreen to
the motorcycle. (Phillips Screwdriver)
4. Place VStream Windscreen into position on motorcycle.
Secure at all 6 locations with the stock screws or replace-
ment Screws (2). Tighten the screws firmly. Do not over
tighten. Figure 2 (Phillips Screwdriver)
5. e-install front plate on outside of windscreen using
stock screws. (3mm Hex Key)
Attention ote:
Special notes and cautionary measures which
can prevent damage to the accessory or
motorcycle.
Tips for facilitation of operation,control and
adjustment, as well as maintenance work.
Right and le t side o motorcycle is determined while
sitting on the bike.
VStream®Windscreen
Installation and Owner’s Manual
20307 Sport, 20308 Mid and 20309 Tall
for FJR 1300 12~
Figure 1
Bag#1103
Figure 2

Never ride your motorcycle with loose accessory mounting hardware. Check the hardware or tightness regularly.
Today's motorcycles are built with enough rame rigidity to withstand the moderate loads imposed on them by the oreseeable addition o an accessory(ies). I an
accessory(ies) adversely a ects your motorcycle’s stability, immediately remove the accessory(ies). Do not ride a motorcycle that exhibits unsa e handling traits.
Have experienced service personnel correct any problem be ore riding with the accessory(ies) installed. For urther questions concerning handling problems
associated with an accessory(ies), contact your dealer, motorcycle manu acturer, or accessory manu acturer.
Sunlight re lected o the inside curvature o the windscreen can, at certain times o day, cause extreme heat buildup on the motorcycles instruments and possibly
even melt them. Exercise care in parking to avoid this. Park your motorcycle acing the sun or place an opaque object over this area.
ational Cycle 3-Year Limited Warranty
National Cycle hereby warrants to the original registered owner of a National Cycle polycarbonate wind-
shield for a period of three years from the date of purchase against breakage. This limited warranty is
expressly limited to the replacement of the polycarbonate windscreen. This limited warranty does not include scratches, coating
failure, cosmetic wear and tear, replacement of hardware, or any consequential damages or expenses including labor cost of
installation, removal and/or replacement, inconvenience, inbound freight expenses or damage to any other component of the
motorcycle or any other accessories. Certain chemicals, generally known as acidic hydrocarbons, are known to cause polycar-
bonate damage and will not be covered under this limited warranty. Please refer to the cleaning instructions supplied with all
National Cycle windshields.
MAI TE A CE
T
o clean the screen, wash with a clean soft cloth, plenty of warm water and if necessary, a non-
abrasive soap such as dishwashing liquid. Flannel or soft chamois make good cleaning cloths.
Paint, glue residue or grease removal: Moisten cotton with Naphtha or Turpentine followed by a
wash as above. National Cycle Shield Wash™ makes a good daily cleaner and comes with a
handy travel size bottle. N1401-01 Shield Wash is safe for all windshields and helmet visors.
Do not clean polycarbonate in hot sun or high temperatures. Do not clean the screen with glass
cleaners.
Do not allow brake fluid, alcohol, or strong solvents to contact the screen.
RAI REPELLE T
Do not use rain protective products made for glass. We recommend National Cycle’s RainZip®
which is safe for all windshields and faceshields. (Part No. N1410-01).
N1401-01
N1410-01
Discover other windshields & fairings on our website.