National Cycle Ztechnik Quantum Vstream Z2394 User manual

Thank you for purchasing a ZTechnik product. Read these instructions carefully and thoroughly before beginning work. Dealers, if installing this wind-
shield for a customer, please give them this manual upon completion. It contains information needed to properly maintain and use this product.
CONTENTS OF KIT
ITEM DESCRIPTION QTY.
A V tream Windscreen 1
TOOLS REQUIRED
T-25 Torx Wrench
ALL OEM FASTENERS
WILL BE REUSED.
Figure 1
PREPARATION
Place motorcycle securely on its centerstand.
All OEM fasteners will be reused.
OEM WINDSCREEN REMO AL
Figure 1
With a T-25 Torx Wrench, loosen and remove the four
screws holding the OEM Windscreen to the mounting
bracket, and remove the metal bushings captive in the
rubber grommets.
Remove the Windscreen, and remove the four rubber
grommets.
Description: V tream® Replacement Windscreen Model: 2020-Later BMW® S1000XR
Part Number: Z2392/Z2393/Z2394 Installation Time: 15 min. Difficulty Level: Easy
ATTENTION: Spec al notes and caut onary measures wh ch
can prevent damage to the accessory or veh cle.
NOTE: T ps for fac l tat on of operat on, control and
adjustment, as well as ma ntenance work.
Quantum® Hardcoated Polycarbonate
Stream® Windscreen for:
2020~ BMW® S1000XR
Z2392 Dark Tint, Sport
Z2393 Light Tint, Sport-Tour
Z2394 Clear, Touring VStream® Windscreen Patent No. 7,387,328
ZTechnik by National Cycle, Inc. PO Box 158 Maywood, IL 60153-0158 U A
708-343-0400 / Fax: [phone] www.ztechnik.com e-mail: [email protected]
©2020 National Cycle, Inc. Page 1 of 2 10-129483-000 09/20

ZTechnik by National Cycle, Inc. PO Box 158 Maywood, IL 60153-0158 U A
708-343-0400 / Fax: [phone] www.ztechnik.com e-mail: [email protected]
©2020 National Cycle, Inc. Page 2 of 2 10-129483-000 09/20
Figure 2
STREAM WINDSCREEN INSTALLATION
Figure 2
Install the four OEM rubber grommets into your new
V tream Windscreen, and install the OEM metal bushings
into the grommets.
Place the Windscreen onto the motorcycle’s windscreen
mounts and install the four OEM Torx screws.
With a T-25 Torx Wrench, tighten the four screws securely,
but do not overtighten.
Ride safe and enjoy your new VStream Windscreen!
CLEANING AND MAINTENANCE
To clean the screen, wash with a clean soft cloth and plenty of warm water and, if necessary, a non-abrasive soap such as dishwashing liquid. Flannel or soft chamois ma e good clean-
ing cloths. Paint, glue residue or grease removal: Moisten cotton wad with naphtha or turpentine followed by a wash as above.
National Cycle Sh eld Wash™ (N1401-01) ma es a good daily cleaner and comes with a handy travel-size bottle. Shield Wash is safe for all windshields and helmet visors
Do not clean polycarbonate in hot sun or high temperatures. Do not clean the screen with household glass cleaners. Do not allow bra e fluid, alcohol, or strong solvents to contact the
screen.
RAIN REPELLENT
Do not use rain protective products made for glass. We recommend National Cycle’s Ra nZ p® (N1410-01) to eep your windscreen clear in rainy weather.
Reg ster Your W ndsh eld Onl ne at www.nat onalcycle.com
ZTechn k by Nat onal Cycle 3-Year L m ted Warranty
National Cycle hereby warrants to the original registered owner of a National Cycle polycarbonate windshield for a period of three years from the date of purchase against brea -
age. This limited warranty is expressly limited to the replacement of the polycarbonate windscreen. This limited warranty does not include scratches, coating failure, cosmetic
wear and tear, replacement of hardware, or any consequential damages or expenses including labor cost of installation, removal and/or replacement, inconvenience, inbound
freight expenses or damage to any other component of the motorcycle or any other accessories. Certain chemicals, generally nown as acidic hydrocarbons, are nown to cause
polycarbonate damage and will not be covered under this limited warranty. Please refer to the cleaning instructions supplied with all National Cycle windshields.
V s t www.nat onalcycle.com for further deta ls, or call or e-ma l Nat onal Cycle.
Never ride your motorcycle with loose accessory mounting hardware. Chec the hardware for tightness regularly.
Today’s motorcycles are built to withstand the moderate loads imposed on them by the foreseeable addition of an accessory(ies). If an accessory(ies) adversely affects your motorcy-
cle's stability, immediately remove the accessory(ies). Do not ride a motorcycle that exhibits unsafe handling traits.
Have experienced service personnel correct any problem before riding with the accessory(ies) installed. For further questions concerning handling problems associated with an
accessory(ies), contact your dealer, motorcycle manufacturer, or accessory manufacturer.
Sunl ght reflected off the ns de curvature of the w ndscreen can, at certa n t mes of day, cause extreme heat bu ldup on the motorcycles nstruments and poss bly even
melt them. Exerc se care n park ng to avo d th s. Park your motorcycle fac ng the sun or place an opaque object over th s area.
WARNING